Mediaspace scheduled maintenance: Aug 25, 2026 07:00 - 12:00 AM. During this time, videos will be temporarily unavailable. Check status updates.

Concept

Inhibiteur de corrosion

Publications associées (30)

Artificial Hydrophilic Organic and Dendrite-Suppressed Inorganic Hybrid Solid Electrolyte Interface Layer for Highly Stable Zinc Anodes

Lei Zhang, Kangning Zhao

Aqueous zinc-ion batteries (AZIBs) have gained significant attentions for their inherent safety and cost-effectiveness. However, challenges, such as dendrite growth and anodic corrosion at the Zn anode, hinder their commercial viability. In this paper, an ...

Amer Chemical Soc2024

Unique corrosion behavior of an archaeological Roman iron ring: Microchemical characterization and thermodynamic considerations

Stefano Mischler

The corrosion mechanisms of a Roman iron bezel ring were investigated by in-depth characterization of its uncommon corrosion pattern and thermodynamic modelling. A silver foil and altered glass remnants were identified, covered with thick strata of magneti ...

2024

Influence of Different Sterilization Methods on the Surface Chemistry and Electrochemical Behavior of Biomedical Alloys

Stefano Mischler, Brigitte Jolles-Haeberli, Anna Neus Igual Muñoz

Sterilization is a prerequisite for biomedical devices before contacting the human body. It guarantees the lack of infection by eliminating microorganisms (i.e., bacteria, spores and fungi). It constitutes the last fabrication process of a biomedical devic ...

2023

Fluoride-Rich, Organic-Inorganic Gradient Interphase Enabled by Sacrificial Solvation Shells for Reversible Zinc Metal Batteries

Lei Zhang, Kangning Zhao

Zinc metal batteries are strongly hindered by water corrosion, as solvated zinc ions would bring the active water molecules to the electrode/electrolyte interface constantly. Herein, we report a sacrificial solvation shell to repel active water molecules f ...

Amer Chemical Soc2023

In-vivo investigation of electrochemical behavior of Ti and CoCrMo alloy in human synovial fluids

Yueyue Bao

With the development of modern medical techniques, the application of orthopedic implants has been continually increasing in recent years. Passive materials, such as Ti and its alloys as well as CoCrMo alloys, are widely used in artificial joints due to th ...

EPFL2023

A Crevice Corrosion Model for Biomedical Trunnion Geometries and Surfaces Feature

Stefano Mischler, Anna Neus Igual Muñoz, Angela Bermudez Castañeda

Modular hip joint implants were introduced in arthroplasty medical procedures because they facilitate the tailoring of patients’ anatomy, the use of different materials in one single configuration, as well as medical revision. However, in certain cases, su ...

2021

Additive Manufacturing of Bulk Metallic Glasses-Process, Challenges and Properties: A Review

Roland Logé, Jamasp Jhabvala, Navid Sohrabi

Bulk Metallic Glasses (BMG) are metallic alloys that have the ability to solidify in an amorphous state. BMGs show enhanced properties, for instance, high hardness, strength, and excellent corrosion and wear resistance. BMGs produced by conventional method ...

MDPI2021

Fretting-corrosion behavior of electroless Ni-P/Ni-P-TiO2 coatings obtained on AZ91D magnesium alloy by a chromium-free process

Stefano Mischler, Angela Bermudez Castañeda

Ni-P electroless coatings are widely applied for protection of magnesium alloys and other materials due to the low energy consumption of the process and high resistance to corrosion and wear, properties that can be improved with the incorporation of partic ...

ELSEVIER2020

Data Science Based Mg Corrosion Engineering

Félix Benedito Clément Musil, Robert Horst Meissner

Magnesium exhibits a high potential for a variety of applications in areas such as transport, energy and medicine. However, untreated magnesium alloys are prone to corrosion, restricting their practical application. Therefore, it is necessary to develop ne ...

2019

On-Site Purification of Copper-Contaminated Vanadium Electrolytes by using a Vanadium Redox Flow Battery

Hubert Girault, Heron Vrubel, Danick Reynard, Christopher Raymond Dennison, Alberto Battistel

Corrosion of carbon-based electrodes and bipolar plates is a major hurdle and can be a cause of failure in commercial vanadium redox flow batteries (VRFBs). Carbon corrosion was found to occur in a commercial VRFB (10 kW/40 kWh), whereby cracks through bip ...

WILEY-V C H VERLAG GMBH2019

Corrosion Mechanisms of Diamond-like Carbon Coated Interlayers & Interfaces

Emilija Ilic

Diamond-like carbon (DLC) coatings can improve the wear resistance of articulating implants. However despite successful in-vitro testing, some DLC coated joint replacements had to be revised prematurely, mainly due to coating delamination induced by corros ...

EPFL2019

Application of Time Series Methods on Long-Term Structural Monitoring Data for Fatigue Analysis

Eugen Brühwiler, Bartlomiej Wojciech Sawicki

Structural health monitoring (SHM) can be employed to reduce uncertainties in different aspects of structural analysis such as: load modeling, crack development, corrosion rates, etc. Fatigue is one of the main degradation processes of structures that caus ...

2019

The corrosion rate and microstructure of Portland cement and calcium aluminate cement-based concrete mixtures in outfall sewers: A comparative study

Karen Scrivener

This paper presents a comparative study on the corrosion rate and microstructural characteristics of Portland cement (PC) and calcium aluminate cement (CAC)-based concrete mixtures subjected to microbially-induced sulphuric acid (biogenic H2SO4) attack for ...

Pergamon-Elsevier Science Ltd2019

Silicon Corrosion in Neutral Media: The Influence of Confined Geometries and Crevice Corrosion in Simulated Physiological Solutions

Stefano Mischler, Emilija Ilic

Silicon (Si) based implantable components are widely used to restore functionalities in the human body. However, there have been reported instances of Si corroding after only a few years of implantation. A key parameter often overlooked when assessing Si s ...

2019

H2-fuelled microbial metabolism in Opalinus Clay

Rizlan Bernier-Latmani, Luca Loreggian, Niels Burzan, Aislinn Ann Boylan, Carla Perez Mon

In Switzerland, the Opalinus Clay formation is considered the most likely host rock for a deep geological repository for nuclear waste. In deep geological repositories, H2 is expected to be the most abundant gas formed from the degradation of waste and fro ...

2019

Preparation of high-conductivity, high-capacity phase change media capsules with enhanced thermos-chemical stability in thermal energy storage applications

Selmar Rudolf Binder

Thermal energy storage using the effects of the latent heat in the solid-liquid phase transformation has found its way into every day applications. Reusable, organic phase change media stabilize low temperatures of parcels, and salt/water tanks act as buff ...

EPFL2019

Nanocrystalline Boron-Doped Diamond as a Corrosion-Resistant Anode for Water Oxidation via Si Photoelectrodes

Kevin Sivula, Jun Ho Yum, Ladislav Kavan, Florian Le Formal

Due to its high sensitivity to corrosion, the use of Si in direct photoelectrochemical (PEC) water-splitting systems that convert solar energy into chemical fuels has been greatly limited. Therefore, the development of low-cost materials resistant to corro ...

AMER CHEMICAL SOC2018

Corrosion mechanisms and durability models for historical tinplate food cans

Fabio Cova Caiazzo

Since the early of the 19th century, canning is one the most efficient ways to preserve foods. Tinplated steel has been used since the beginning for this purpose and it is still one of the most used materials for cans production because it combines the goo ...

EPFL2018

Numerical simulation of the probability of corrosion initiation of RC elements made of reinforcing steel with improved corrosion performance

Eugen Brühwiler, David Conciatori

Steel reinforcing bars in concrete are protected from corrosion by a thin oxide film that is created on the steel surface in the highly alkaline environment of the concrete. Corrosion process begins once this oxide film is destroyed, for example, by chlori ...

2018

Degradation of modular hip joint implants : a corrosion and tribocorrosion approach

Angela Bermudez Castañeda

Total hip joint arthroplasty is a medical procedure to replace a natural failed joint by an artificial joint to improve the quality of life of the patient. In spite of its broad success, there is a concern about the relation between the presence of modular ...

EPFL2018