Georges WagnièresGeorges Wagnières a obtenu son diplôme (MSc) en physique à l'Université de Lausanne, Suisse, en 1986. Il a reçu son doctorat ès science (PhD) en physique (Optique Biomédicale) de l'Ecole Polytechnique Fédérale de Lausanne (EPFL) en 1992, et a effectué un travail de postdoctorat dans les "Wellman Laboratories of Photomedicine" (Harvard Medical School) situés à Boston, MA, USA, en 1993 et 1994. Il a aussi obtenu, en 2001, un "Master in management of technology" délivré par l'Ecole des Hautes Etudes Commerciales (HEC) de l'Université de Lausanne et l'EPFL. Depuis 1994, il gère un groupe de recherche de l'EPFL actif dans les domaines suivants: - Caractérisation et détection de lésions cancéreuses par spectroscopie et imagerie de fluorescence ainsi que par imagerie à fort grossissement. - Traitement du cancer ainsi que d'autres pathologies associées à des désordres immunologiques (maladie de Crohn, Colite ulcéreuse) ou vasculaires par thérapie photodynamique (PDT). - Développement préclinique et clinique de photosensibilisateurs, de marqueurs fluorescents et d'instruments optiques pour le photodiagnostic. - Traitement de diverses pathologies, y compris les maladies neuro-dégénératives (Parkinson, Alzheimer), par photobiomodulation. - Monitorage de la dose optique pour la PDT basée sur l'imagerie de fluorescence de photosensibilisateurs. - Induction de l'extravasation d'agent chimiothérapeutiques par PDT. - Mesure in vivo de la concentration d'oxygène dans des tissus biologiques par spectroscopie et imagerie optiques résolues en temps. - Monitorage d'un traitement au laser de la rétine par imagerie de reflectance. - Développement de distributeurs de lumière pour des applications biomédicales. - Dosimétrie de lumière / Radiométrie. - Spectroscopie et imagerie en optique biomédicale. Georges Wagnières est aussi co-fondateur et a présidé une société "spin-off" de l'EPFL: - Medlight SA, fondée en 1997, qui développe, produit et commercialise des distributeurs de lumière pour la thérapie photodynamique. Georges Wagnières est l'auteur et co-auteur de plus de 235 articles scientifiques dont 150 ont été publiés dans des revues internationales ayant un comité de relecture (review board). De plus, il est inventeur de 18 brevets. Finalement, il supervise ou a supervisé 12 doctorants et enseigne actuellement à l'EPFL l'optique biomédicale et la photomédecine au niveaux "master". Ces cours sont aussi donnés à l'Ecole doctorale (EDCH, EDSV) de l'EPFL. Finalement, il donne le cours intitulé "Physique Générale I" aux biologistes de première année inscrits à l'Ecole de Biologie de l'Université de Lausanne. PUBLICATIONS PRINCIPALES: SVP visiter: https://www.epfl.ch/labs/lifmet/wagnieres/publications/ Stéphanie LacourStéphanie P. Lacour holds the Bertarelli Foundation Chair in Neuroprosthetic Technology in the School of Engineering at EPFL and leads the Laboratory for Soft Bioelectronic Interfaces. She received her PhD in Electrical Engineering from INSA de Lyon, France, and completed postdoctoral research at Princeton University and the University of Cambridge. She is the recipient of the 2006 MIT TR35, a University Research Fellowship of the Royal Society, European Research Council ERC Starting and POC Grants, and a SNSF-ERC Consolidator Grant. She was elected a 2015 Young Global Leader by the World Economic Forum.
Dominique PiolettiDominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
Graham KnottEnseignement et PhD Cours Methods: from disease models to therapy BIOENG-518 Ce cours décrira les méthodes qui sont à la base des approches translationnelles depuis la génération et la caractérisation des modèles des maladies jusqu'aux applications thérapeutiques. Les bases théoriques seront complétées par des rotations pratiques dans les plateformes technologiques.
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Nikolaos StergiopoulosEducation
MTE, Managing the Technology Enterprise Program (2000), IMD, Lausanne
Ph.D. in Biomedical Engineering & Engineering Mechanics (1990) Iowa State University, Ames, Iowa.
MS in Biomedical Engineering (1987) Iowa State University, Ames, Iowa.
Diploma in Mechanical Engineering (1985) National Technical University of Athens.
Professional Activities
2002 - present: Professor and director of LHTC
2010 - present: Founder and director of Rheon Medical SA, Préverenges, Switzerland
2008 - present: Founder and director of Antlia S.A., PSE-C, EPFL campus, Switzerland
1998 - 2007: Founder and Scientific Director of EndoArt S.A., Lausanne, Switzerland
1996 - 2002: Assistant professor at the Biomedical Engineering Laboratory, Swiss Federal Institute of Technology, Lausanne, Switzerland.
1991 - 1996: Research Associate at Swiss Federal Institute of Technology - Lausanne
1990 - 1991: Lecturer, Iowa State University
Mahmut Selman SakarEnseignement et PhD Doctorant·es actuel·les Lorenzo Francesco John Noseda, Nikita Norkin, Elif Ezgi Inan, Houman Javaheri, Mehdi Ali Gadiri, Julian Leon Raub, Junsun Hwang A dirigé les thèses EPFL de Erik Mailand, Raquel Filipa Penacho Parreira, Murat Kaynak, Lucio Pancaldi-Giubbini, Fazil Emre Uslu, Matthias Rüegg, Ece Özelçi, Emilie Vuille-Dit-Bille A co-dirigé les thèses EPFL de Laura Joan Hermans, Sourabh Monnappa Kuppanda Jafri Cours Dynamical systems ME-221 Introduction à la modélisa
Marianne LiebiEnseignement et PhD Doctorant·es actuel·les Atreyee Acharya, Dominique Olivier Windisch, Sici Wang, Torne Tänzer, Else Linnea Rensmo, Carolina Gutierrez Bolaños Cours Material science at large scale facilities MSE-435 Ce cours donne une introduction à la recherche sur les matériaux utilisant les rayons X et les neutrons. Après une introduction aux grands instruments de recherche, nous plongerons dans les différentes méthodes, y compris des exemples d'application dans divers domaines de la
Alexandre TerrierEnseignement et PhD Doctorant·es actuel·les Mi-Lane Bouchez, Léa Pistorius A co-dirigé les thèses EPFL de Miguel Gortchacow, Adeliya Latypova, Christoph Anselm Engelhardt, Valérie Malfroy Camine, Yasmine Boulanaache, Pezhman Eghbalishamsabadi Cours Engineering of musculoskeletal system and rehabilitation BIO-687 Numerical methods in biomechanics ME-484 Les étudiants comprennent et appliquent les méthodes numériques (MEF) pour répondre à une question de recherche en biomécan
Afficher plus