Mihai Adrian IonescuD'origine et de nationalités roumaine et suisse, Mihai-Adrian Ionescu est né en 1965. Après le doctorat en Physique des Composants à Semiconducteurs de lInstitut National Polytechnique de Grenoble, M. Ionescu a travaillé comme chercheur post-doctoral au LETI-CEA Grenoble, sur la caractérisation des diélectriques low-k pour les technologies submicroniques CMOS. Après une courte période au sein du CNRS, comme chargé de recherche 1ere Classe il a effectué un séjour post-doctoral au Center for Integrated Systems, Stanford University, USA. Actuellement il est Professeur Nanoélectronique à lEcole Polytechnique Fédérale de Lausanne.
Claudio BruschiniClaudio Bruschini holds an MSc in high energy physics from the University of Genova and a PhD in Applied Sciences from the Vrije Universiteit Brussel (VUB). He started his career with INFN (Italy, 1993), in the WA92 CERN collaboration (particle physics), and then moved to CERN as a Fellow in the European GP-MIMD2 project, attached to the NA48 collaboration (particle physics, parallel programming, 1994-1995). He then started his close collaboration with EPFL, first in the DeTeC (Demining Technology Center) project (sensors for landmine detection/humanitarian demining, 1996-1997). After DeTeC's end, he started the first of a series of fruitful collaborations with the Vrije Universiteit Brussel (VUB) on humanitarian demining related R&D (1998). This was followed by the EUDEM survey project (The European Union in Humanitarian Demining, 1998), the EUDEM2 three year EC sponsored support measure (www.eudem.info, 2001-2004), and the DELVE support action (www.delve.vub.ac.be, 2007). In parallel he started working within the EPFL's AQUA group (Advanced Quantum Architectures, Edoardo Charbon), on topics as diverse as ultrasonic sensors for in-air application, optical 3D and high speed 2D sensing, sensor networks, or tracking/motion capture systems, in particular for the preparation of research projects. This culminated in the European MEGAFRAME (www.megaframe.eu, FP6, 2006-2010, SPAD arrays and related in-pixel time stamping electronics in deep submicron CMOS technology) and SPADnet (www.spadnet.eu, FP7, 2010-2014, networked SPAD arrays for Positron Emission Tomography) projects, coordinated by EPFL-AQUA. As from 2009 he also worked with Dario Floreano on the management of the CURVACE Curved Artificial Compound Eyes FP7 project (www.curvace.org), coordinated by EPFL-LIS. He was also active with CHUV (Lausanne University Hospital) within EndoTOFPET-US (endoscopic PET) as well as on a CTI project devoted to the development of a new hand-held standalone tool for tracer-guided medical procedures. In 2014 he had also the pleasure of joining the EPFL ICLAB of Christian Enz during its ramp-up phase, collaborating on device related topics (SNF GigaRadMOST) and biomedical R&D (NanoTera WiseSkin). Claudio is now fully with EPFL’s Advanced Quantum Architecture (AQUA). He has also been active as independent scientific consultant, under the label CBR Scientific Consulting, on the preparation of (European) R&D project proposals and the execution of individual studies, and worked in 2006 for a local start-up as operations manager and R&D advisor.... but this is another story. An unauthorized early biography is available at http://lami.epfl.ch/team/claudiob/... Christophe BallifChristophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.
Giovanni De MicheliExpertise
Technologies de conception pour les systèmes intégrés, tels que la synthèse, le codesign de HW/SW et la conception de basse puissance. Technologies de conception des systèmes sur les plateformes hétérogènes comprenant les composants électriques, et biologiques.
En savoir plus
Consulter svp http://si2.epfl.ch/~demichel/
Enseignement et PhD A dirigé les thèses EPFL de Abhishek Garg, Mohamed Haykel Ben Jamaa, Francesco Zanini, Ciprian Seiculescu, Cristina Boero, Hu Xu, Andrea Cavallini, Shashi Kanth Paolo IennePaolo Ienne has been a Professor at the EPFL since 2000 and heads the Processor Architecture Laboratory (LAP). Prior to that, he worked for the Semiconductors Group of Siemens AG, Munich, Germany (which later became Infineon Technologies AG) where he was at the head of the Embedded Memories unit in the Design Libraries division. His research interests include various aspects of computer and processor architecture, FPGAs and reconfigurable computing, electronic design automation, and computer arithmetic. Ienne was a recipient of Best Paper Awards at the 20th, 24th, and 28th ACM/SIGDA International Symposia on Field-Programmable Gate Arrays (FPGA), in 2012, 2016 and 2020, at the 19th and 30th International Conference on Field-Programmable Logic and Applications (FPL), in 2009 and 2020, at the International Conference on Compilers, Architectures, and Synthesis for Embedded Systems (CASES), in 2007, and at the 40th Design Automation Conference (DAC), in 2003; many other papers have been candidates to Best Paper Awards in prestigious venues. He has served as general, programme, and topic chair of renown international conferences, including organizing in Lausanne the 26th International Conference on Field-Programmable Logic and Applications (FPL) in 2016. He serves on the steering committee of the IEEE Symposium on Computer Arithmetic (ARITH) and of the International Conference on Field-Programmable Logic and Applications (FPL). Ienne has guest edited a number of special issues and special sections on various topics for IEEE and ACM journals. He is regularly member of program committees of international workshops and conferences in the areas of design automation, computer architecture, embedded systems, compilers, FPGAs, and asynchronous design. He has been an associate editor of ACM Transactions on Architecture and Code Optimization (TACO), since 2015, of ACM Computing Surveys (CSUR), since 2014, and of ACM Transactions on Design Automation of Electronic Systems (TODAES) from 2011 to 2016.
Alexandre SchmidEnseignement et PhD A dirigé les thèses EPFL de Mahsa Shoaran, Wen-Yang Hsu, Reza Ranjandish, Keyvan Farhang Razi, Mohammad Javad Karimi A co-dirigé les thèses EPFL de Milos Stanisavljevic, Neil Joye, Vahid Majidzadeh Bafar, Hossein Afshari, Nikola Katic, Abdulkadir Akin Cours Analog circuits for biochip EE-518 Introduction à la conception analogique CMOS pour des biocapteurs à distance sur puce. Compréhension et la conception de systèmes de biocapteurs actifs et alimentés à distance. Compré
Pierre-André BesseEnseignement et PhD A dirigé les thèses EPFL de Klaus Ehrmann Cours La science quantique : une vision singulière MICRO-444 Les étudiants comprennent les caractéristiques de la science quantique. Ils en maitrisent le formalisme et l'appliquent dans les systèmes de base: puits, fils et boites quantiques, qubits. Physique des composants semiconducteurs MICRO-312 Les étudiants savent expliquer la physique des composants semiconducteurs, tels que diodes, transistors et composants
Mirjana StojilovicMirjana Stojilović received the Dipl. Ing. and Ph.D. degrees from the School of Electrical Engineering, University of Belgrade, in 2006 and 2013, respectively. From 2010 to 2013, she was collaborating with the Processor Architecture Laboratory at EPFL, visiting periodically as a Guest Researcher. From 2013 to 2016, she was working at the University of Applied Sciences Western Switzerland as a senior researcher, and at EPFL as a lecturer. She joined Parallel Systems Architecture Lab at EPFL in October 2016. Mirjana's main research interests include electronic design automation, reconfigurable computing, electromagnetic-compatibility and signal-integrity issues, and hardware security. Mirjana Stojilović serves on the program committee of the FPGA, FPL, and FCCM conferences and as a reviewer for IEEE TCAD, TVLSI, TC, TEMC, IEEE Access and ACM TRETS. She received the Best Paper Award at 2016 International Symposium on Electromagnetic Compatibility (EMC Europe 2016), Young Scientist Award at 33rd International Conference on Lightning Protection (ICLP2016), and the Young Author Best Paper Award at the 20th Telecommunication Forum in Belgrade (TELFOR 2012). In 2015, the EPFL School of Computer and Communication Sciences (IC) presented her with the Teaching Award.
Eugen BrühwilerExpertise
structural and material engineering of existing civil structures in particular bridges of high cultural value; fatigue, dynamics and structural behaviour of bridges; Ultra-high performance fiber reinforced cementitious composites and composite UHPFRC - RC structures.
Expertise
structural and material engineering of existing civil structures in particular bridges of high cultural value; fatigue, dynamics and structural behaviour of bridges; Ultra-high performance fiber reinforced cementitious compo
Jean-Michel SalleseEnseignement et PhD Doctorant·es actuel·les Marta Macaluso A dirigé les thèses EPFL de Luca Gautero, Fengda Sun, Frédéric Zanella, Lucian Barbut, Farzan Jazaeri, Camillo Stefanucci, Jacopo Bronuzzi, Georgi Gorine, Chiara Rossi, Viros Sriskaran, Arnout Devos, Gennaro Termo A co-dirigé les thèses EPFL de Louis Harik, Fabrizio Lo Conte, Maria-Alexandra Paun, Anurag Mangla, Pranav Vivek Kulkarni Cours Electronique EE-280 Présentation des principaux composants de base de l'électronique.Analyse
David Atienza AlonsoDavid Atienza Alonso is an associate professor of EE and director of the Embedded Systems Laboratory (ESL) at EPFL, Switzerland. He received his MSc and PhD degrees in computer science and engineering from UCM, Spain, and IMEC, Belgium, in 2001 and 2005, respectively. His research interests include system-level design methodologies for multi-processor system-on-chip (MPSoC) servers and edge AI architectures. Dr. Atienza has co-authored more than 350 papers, one book, and 12 patents in these previous areas. He has also received several recognitions and award, among them, the ICCAD 10-Year Retrospective Most Influential Paper Award in 2020, Design Automation Conference (DAC) Under-40 Innovators Award in 2018, the IEEE TCCPS Mid-Career Award in 2018, an ERC Consolidator Grant in 2016, the IEEE CEDA Early Career Award in 2013, the ACM SIGDA Outstanding New Faculty Award in 2012, and a Faculty Award from Sun Labs at Oracle in 2011. He has also earned two best paper awards at the VLSI-SoC 2009 and CST-HPCS 2012 conference, and five best paper award nominations at the DAC 2013, DATE 2013, WEHA-HPCS 2010, ICCAD 2006, and DAC 2004 conferences. He serves or has served as associate editor of IEEE Trans. on Computers (TC), IEEE Design & Test of Computers (D&T), IEEE Trans. on CAD (T-CAD), IEEE Transactions on Sustainable Computing (T-SUSC), and Elsevier Integration. He was the Technical Program Chair of DATE 2015 and General Chair of DATE 2017. He served as President of IEEE CEDA in the period 2018-2019 and was GOLD member of the Board of Governors of IEEE CASS from 2010 to 2012. He is a Distinguished Member of ACM and an IEEE Fellow.
Cyrille HibertCyrille HIBERT received his diploma in Physics in 1994 and his PhD in 1998 from University of Orleans (FR). He then held a post doctoral position in GREMI laboratory at the University of Orleans in collaboration with Alcatel Vacuum Technology and ST Microelectronics, working in deep anisotropic etching of silicon with an Inductively Coupled Plasma reactor. In May 2000 he joined the EPFL-Center of Micro-Nano-technology where he was in charge of the plasma etching activities. He left EPFL in October 2003 for a sabbatical year to join the CFF group at NMRC (Ireland) now called Tyndall Institute. He worked on developing plasma processing. In October 2004, he came back to EPFL-CMI to be in charge of etching and nanotechnology activities (FIB and future ebeam litho).
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Touradj EbrahimiTouradj EBRAHIMI received his M.Sc. and Ph.D., both in Electrical Engineering, from the Swiss Federal Institute of Technology (EPFL), Lausanne, Switzerland, in 1989 and 1992 respectively. In 1993, he was a research engineer at the Corporate Research Laboratories of Sony Corporation in Tokyo, where he conducted research on advanced video compression techniques for storage applications. In 1994, he served as a research consultant at AT&T Bell Laboratories working on very low bitrate video coding. He is currently Professor at EPFL heading its Multimedia Signal Processing Group. He is also the Convenor of JPEG standardization Committee. He was also adjunct Professor with the Center of Quantifiable Quality of Service at Norwegian University of Science and Technology (NTNU)between 2008 and 2012.
Prof. Ebrahimi has been the recipient of various distinctions and awards, such as the IEEE and Swiss national ASE award, the SNF-PROFILE grant for advanced researchers, Four ISO-Certificates for key contributions to MPEG-4 and JPEG 2000, and the best paper award of IEEE Trans. on Consumer Electronics . He became a Fellow of the international society for optical engineering (SPIE) in 2003. Prof. Ebrahimi has initiated more than two dozen National, European and International cooperation projects with leading companies and research institutes around the world. He is a co-founder of Genista SA, a high-tech start-up company in the field of multimedia quality metrics. In 2002, he founded Emitall SA, start-up active in the area of media security and surveillance. In 2005, he founded EMITALL Surveillance SA, a start-up active in the field of privacy and protection. He is or has been associate Editor with various IEEE, SPIE, and EURASIP journals, such as IEEE Signal Processing Magazine, IEEE Trans. on Image Processing, IEEE Trans. on Multimedia, EURASIP Image Communication Journal, EURASIP Journal of Applied Signal Processing, SPIE Optical Engineering Magazine. Prof. Ebrahimi is a member of Scientific Advisory Board of various start-up and established companies in the general field of Information Technology. He has served as Scientific Expert and Evaluator for Research Funding Agencies such as those of European Commission, The Greek Ministry of Development, The Austrian National Foundation for Scientific Research, The Portuguese Science Foundation, as well as a number of Venture Capital Companies active in the field of Information Technologies and Communication Systems. His research interests include still, moving, and 3D image processing and coding, visual information security (rights protection, watermarking, authentication, data integrity, steganography), new media, and human computer interfaces (smart vision, brain computer interface).
He is the author or the co-author of more than 200 research publications, and holds 14 patents. Prof. Ebrahimi is a member of IEEE, SPIE, ACM and IS&T.
See the URL below for more details:
http://mmspl.epfl.ch Pierre-André FarinePierre-André Farine received the Doctoral and Engineering Degrees in Microtechnology from University of Neuchâtel, Switzerland, respectively in 1984 and 1978, and the Engineering in Microtechnology from ETS Le Locle in 1974.
He was working 17 years for the Swiss watch industries (Swatch Group), including developments for high-tech products, such as pager watches, watches including integrated sensors such as pressure, compass, altimeter and temperature sensors for Tissot. He was also involved in prototypes developments for watches including GPS and cellular GSM phones.
Since 8 years, he is Professor in Electronics and Signal Processing at the Institute of Microtechnology IMT, University of Neuchâtel, Switzerland. Full professor at EPFL since January 1st, 2009, he works in the field of low-power integrated products for portable devices, including microelectronics for wireless telecommunications, UWB and GNSS systems. He is Head of the Electronics and Signal Processing Laboratory ESPLAB of the EPFL IMT-NE. His laboratory works also for video and audio compression algorithms and their implementation in low power integrated circuits.
Maher KayalMaher Kayal received M.S. and Ph.D degrees in electrical engineering from the Ecole Polytechnique Fédérale de Lausanne (EPFL, Switzerland) in 1983 and 1989 respectively. He has been with the Electronics laboratories of the Ecole Polytechnique Fédérale de Lausanne (EPFL, Switzerland) since 1990, where he is currently a professor and director of the Energy Management and Sustainability" section. He has published many scientific papers, coauthor of three text books dedicated to mixed-mode CMOS design and he holds eleven patents. His technical contributions have been in the area of analog and Mixed-signal circuits design including highly linear and tunable sensors microsystems, signal processing and green energy management. Prizes and Honors : Electronics Letters journal Premium Award 2013, Outstanding Paper Award? IEEE Mixdes 2013 Basil Papadias paper Award, IEEE Powertech 2013 Best Paper Awards, Mixdes 2013 Best Paper Awards, ICCAS 2012 Outstanding Paper Award- IEEE Mixdes 2012. Poland Section IEEE ED Chapter special award in 2011. Credit Suisse Award for Best Teaching- 2009. The William M. Portnoy Award at the Energy Conversion Congress and Exposition , California Sept 2009. Best Paper Award - IEEE-Mixdes 2009. High Quality Paper - IEEE Power Tech Conference June 2009. Best Paper Award - IEEE-Mixdes 2007. Best Paper Award - IEEE-TTTC International Conference on Automation, Quality and Testing, Robotics - 2006. Best Application Specific Integrated Circuit at the International European Design and Test Conference ED&TC - 1997. Ascom Award for the Best Work in Telecommunication Fields 1990. Publications Books. Books: Methodology for the Digital Calibration of Analog Circuits and Systems, Marc Pastre & Maher Kayal. Springer Publisher- (ISBN 1-4020-4252-3)-2006. Structured Analog CMOS Design, Danica Stefanovic & Maher Kayal. Springer Publisher-(ISBN 978-1-4020-8572-7)-2008. Linear CMOS RF Amplifiers for Wireless Applications, Maher Kayal, Springer Publisher. (ISBN 978-90-481-9360-8)-2010. Coeditor of Microelectronics Education Kluwer Academic Publishers. (ISBN 1-4020-2072-4). -2004.
