Concept

Liquid fluoride thorium reactor

Publications associées (32)

Innovative dud detection based on JET DT experience

DT operations at JET gave a unique and invaluable opportunity to design, develop and test real -time controllers that will be applied in future burning plasma devices, as ITER and SPARC. Among them, the dud detector [L. Piron et al. 2019 Fusion Eng. Design ...

Elsevier Science Sa2024

Coupling a recurrent neural network to SPAD TCSPC systems for real-time fluorescence lifetime imaging

Edoardo Charbon, Claudio Bruschini, Andrei Ardelean, Paul Mos, Yang Lin

Fluorescence lifetime imaging (FLI) has been receiving increased attention in recent years as a powerful diagnostic technique in biological and medical research. However, existing FLI systems often suffer from a tradeoff between processing speed, accuracy, ...

Nature Portfolio2024

Neutron-Gamma Noise Measurements in a Zero-Power Reactor Using Organic Scintillators

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari

Noise measurements in light water reactor systems aid in generating validation data for integral point kinetic parameter predictions and generating monitoring parameters for reactor safety and safeguards. The CROCUS zero-power reactor has been used to supp ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Preliminary safety analysis of the TRANSMUTEX sub-critical reactor using the GeN-Foam multi-physics solver

Andreas Pautz, Carlo Fiorina, Thomas Arthur Louis Joseph Guilbaud

This work presents a preliminary safety analysis of the accelerator-driven system under development at TRANSMUTEX. It is a sub-critical lead-cooled fast reactor with a nominal power of 300 MWth having the following features: (1) an inert-matrix fuel; (2) a ...

Pergamon-Elsevier Science Ltd2023

Tritium removal from JET-ILW after T and D-T experimental campaigns

Henri Weisen, Mikhail Maslov

After the second Deuterium-Tritium Campaign (DTE2) in the JET tokamak with the ITER-Like Wall (ILW) and full tritium campaigns that preceded and followed after the DTE2, a sequence of fuel recovery methods was applied to promote tritium removal from wall c ...

IOP Publishing Ltd2023

Improved methodology for analysis and design of Molten Salt Reactors

Rodrigo Gonzalez Gonzaga De Oliveira

Molten Salt Reactors is a class of advanced reactors that is typically characterised by the presence of a molten inorganic salt of a fissile material as fuel. At the moment, this class of reactors is considered one of the promising options in the long run ...

EPFL2021

Interface Tracking Investigation of the Sliding Bubbles Effects on Heat Transfer in the Laminar Regime

Konstantin Mikityuk, Lubomír Bures

Helium gases are utilized to remove fission products from the molten salt fast reactor (MSFR) core during operation. Helium gases and other volatile fission products may be introduced into the intermediate heat exchanger channels. The effect of these gases ...

2022

Investigation on the effect of eccentricity for fuel disc irradiation tests

Andreas Pautz, Carlo Fiorina, Alessandro Scolaro

A varying degree of eccentricity always exists in the initial configuration of a nuclear fuel rod. Its impact on traditional LWR fuel is limited as the radial gap closes relatively early during irradiation. However, the effect of misalignment is expected t ...

2021

Towards the Validation of Noise Experiments in the CROCUS Reactor Using the TRIPOLI-4 Monte Carlo Code in Analog Mode

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari

Intrinsic neutron noise experiments offer a non-invasive manner to measure the prompt decay constant or reactivity of fissile systems. Using the fluctuations in the density of fission chains, one can infer the kinetics parameters via correlation analysis s ...

2021

Data-Driven Reduced-Order Modeling of Convective Heat Transfer in Porous Media

Carlo Fiorina

This work presents a data-driven Reduced-Order Model (ROM) for parametric convective heat transfer problems in porous media. The intrusive Proper Orthogonal Decomposition aided Reduced-Basis (POD-RB) technique is employed to reduce the porous medium formul ...

MDPI2021

Drift-related transport and plasma-neutral interaction in the TCV divertor

Mirko Wensing

Thermonuclear fusion of light atoms is the primary energy source of stars, such as our Sun, that led to the emergence of life on Earth. However, its economic exploitation as a virtually unlimited and clean energy source is yet to be developed. One of the m ...

EPFL2021

Aqueous effluent treatment system

Jeremy Luterbacher, Gaël Peng, Frédéric Edouard Juillard

Aqueous effluent treatment system (2) including a separation reactor (4) having a reactor chamber fluidly connected to an aqueous effluent source (3), connected via a pump (5) to an inlet (34) of the reactor chamber, a fluid extraction system (6) connected ...

2020

The EQL0D fuel cycle procedure and its application to the transition to equilibrium of selected molten salt reactor designs

Andreas Pautz, Boris Aviv Hombourger

In recent years, Molten Salt Reactors (MSRs), one of the Generation IV concepts, have noticeably gained in interest. Several molten salt reactor types use fuel in liquid form, bringing various advantages, notably in terms of fuel cycle. However, simulating ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Synthesis of grid compliant substitute natural gas from a representative biogas mixture in a hybrid Ni/Ru catalysed reactor

Andreas Züttel, Robin Tobias Andreas Mutschler, Emanuele Moioli, Marco Calizzi, Alexandre Borsay

We demonstrate biogas upgrading towards full CO2 conversion in mild conditions in a three-step reactor system using Ru- and Ni-based catalysts. In each of the three reactor stages, the temperature is carefully controlled, thus optimizing the reaction therm ...

2020

Preliminary design and analysis of Liquid Fuel Molten Salt Reactor using multi-physics code GeN-Foam

Carlo Fiorina

In this study, a hypothetical fast spectrum Liquid Fuel Molten Salt Reactor (LFMSR) core is modeled using the multiphysics C++ code GeN-Foam (General Nuclear Foam). GeN-Foam is based on OpenFOAM, a C++ opensource library for solution of continuum mechanics ...

ELSEVIER SCIENCE SA2020

Nuclear data uncertainties for Swiss BWR spent nuclear fuel characteristics

Mathieu Hursin, Hakim Ferroukhi, Dimitri Rochman, Abdelhamid Dokhane

The effect of nuclear data (fission yields, cross sections and emitted spectra) is quantified for spent nuclear fuel assemblies from a realistic boiling water reactor operated over 25 cycles. Nominal calculations are performed with the CASMO5, SIMULATE-3 a ...

2020

Dynamic Modeling and Control of a Coupled Reforming/Combustor System for the Production of H2 via Hydrocarbon-Based Fuels

Theodoros Damartzis

The present work aims to provide insights into the dynamic operation of a coupled reformer/combustion unit that can utilize a variety of saturated hydrocarbons (HCs) with 1–4 C atoms towards H2 production (along with CO2). Within this concept, a preselecte ...

2020

The shear strength of Opalinus Clay shale in the remoulded state

Alessio Ferrari

The Opalinus Clay shale formation is considered as a potential host geomaterial for the Swiss deep geological repository for radioactive waste. It presents different facies and it is characterised by a multi-scale heterogeneous composition, by a typical fi ...

2020

Comparison of Reduced-Basis techniques for the model order reduction of parametric incompressible fluid flows

Carlo Fiorina

The applicability of two Reduced-Basis techniques to parametric laminar and turbulent incompressible fluid flow problems in nuclear engineering is studied in this work. The Reduced-Basis methods are used to generate Reduced-Order Models (ROMs) that can acc ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Efficient Kr/Xe separation from triangular g-C(3)N(4)nanopores, a simulation study

Nicola Marzari, Kumar Varoon Agrawal, Davide Campi, Luis Francisco Villalobos Vazquez de la Parra, Nicola Colonna

Poly(triazine imide) or PTI is a promising material for molecular sieving membranes, thanks to its atom-thick ordered lattice with an extremely high density (1.6 x 10(14)pores per cm(2)) of triangular-shaped nanopores of similar to 0.34 nm diameter. Here, ...

Royal Society of Chemistry2020