Olivier SauterEnseignement et PhD Doctorant·es actuel·les Cassandre Ekta Contré, Antonia Frank, Peizheng Zhang, Jean-Pierre Thomas Svantner, Cristina Venturini, Cosmas Quirin Lorenz Heiss, Daniel Perales Rios, Viacheslav Bochkarev, Jan Jakub Frybes, Paul Véronique Guillaume Devianne A dirigé les thèses EPFL de Clemente Angioni, Petri Nikkola, Alberto Bottino, Andrei Martynov, Emiliano Fable, Costanza Zucca, Federico Felici, Dávid Wágner, Doohyun Kim, Anna Teplukhina, Mengdi Kong, Francesco Carpanese, Simon Van Mulders,
Jonathan GravesProf. Jonathan P. Graves is a Senior Scientist at EPFL and Honorary Visiting Professor at the University of York, UK. He achieved first class joint honours in Electronic Engineering and Mathematics from the University of Nottingham, UK in 1996. He completed his Ph.D. in Theoretical Mechanics from the University of Nottingham, UK, three years later in 1999. During his Ph.D. he was based in the Culham theory group of the United Kingdom Atomic Energy Authority, developing kinetic descriptions of the internal kink instability, and participating in deuterium-tritium experimental analysis in the Joint European Torus. After a short time in industry, and a postdoc at Nottingham University, he took a position at the Swiss Plasma Center at EPFL, becoming a Senior Scientist in 2014, and became an Honorary Visiting Professor at the University of York, UK, in 2020. In 2015 he became a member of the EUROfusion Scientific and Technical Advisory Committee (STAC) and a member of the EUROfusion DEMO Technical Advisory Group. He is on the editorial board for the journal Plasma Physics and Controlled Fusion, and in 2020 became Scientific Secretary of the Varenna-Lausanne International Workshop in Theory of Fusion Plasmas.
Baruch RofmanEnseignement et PhD Cours Physique numérique (pour SPH) PHYS-210 Aborder, formuler et résoudre des problèmes de physique en utilisant des méthodes numériques élémentaires. Comprendre les avantages et les limites de ces méthodes (stabilité, convergence). Illustrer différents sujets de physique traités dans d'autres cours.
Roger SauserEnseignement et PhD Cours Géométrie descriptive (pour MAN) PREPA-091 Le cours aborde les techniques des projections parallèles (axonométrie et représentation de Monge) et centrales (perspective) de manière à développer la capacité de l'étudiant.e à décrire et étudier des objets et des situations spatiales en les illustrant par des croquis. ICS (pour CMS) PREPA-026 Le cours présente différentes méthodes numériques destinées à la résolution d'équations non linéaires, au calcul
Vladimir ManucharyanEnseignement et PhD Doctorant·es actuel·les Chulwoo Ahn, Marco Nicolas Mueller, Taketo Imaizumi, Andrea Lizzit, Andrea Duina, Nikola Dimitrov Dimitrov Cours Microwave engineering in physics QUANT-410 Ce cours vise à enseigner les notions de base et les astuces de l'ingénierie des micro-ondes aux étudiants n'ayant qu'une connaissance élémentaire de l'électromagnétisme. L'accent est mis sur des sujets qui apparaissent souvent dans les expériences de physique moderne, y compris la science qua
Théophile BoinnardFormation M2 ICFP - Physique Théorique | 2022 – 2023 École Normale Supérieure Paris, Paris, France M1 Physique Fondamentale | 2020 – 2021 École Normale Supérieure Paris-Saclay, Gif-Sur-Yvette, France L3 Physique Fondamentale | 2019 – 2020 École Normale Supérieure Paris-Saclay, Gif-Sur-Yvette, France Classe Préparatoire PCSI-PSI* | 2017 – 2019 Lycée Fabert, Metz, France Expériences professionnelles Stage M2 "Coefficient
Anastasios VassilopoulosEnseignement et PhD Doctorant·es actuel·les Filippo Mannino, Joseph Vincent Arnaud Bernaert, Seyed Shayan Khalooei Tafti A dirigé les thèses EPFL de Alireza Farajzadeh Moshtaghin, Abdolvahid Movahedirad, Dharun Vadugappatty Srinivasan A co-dirigé les thèses EPFL de Ye Zhang, Behzad Dehghan Manshadi, Omar Moussa, Roohollah Sarfaraz Khabbaz, Moslem Shahverdi, Wei Sun, Haifeng Fan, Maria Savvilotidou, Myrsini Angelidi, Aida Cameselle Molares, Niloufar Vahedi, Jialiang Fan, Congzhe Wang Cours Advanced compo
Giovanni De MicheliExpertise
Technologies de conception pour les systèmes intégrés, tels que la synthèse, le codesign de HW/SW et la conception de basse puissance. Technologies de conception des systèmes sur les plateformes hétérogènes comprenant les composants électriques, et biologiques.
En savoir plus
Consulter svp http://si2.epfl.ch/~demichel/
Enseignement et PhD A dirigé les thèses EPFL de Abhishek Garg, Mohamed Haykel Ben Jamaa, Francesco Zanini, Ciprian Seiculescu, Cristina Boero, Hu Xu, Andrea Cavallini, Shashi Kanth John BotsisJohn (Ioannis) Botsis obtained his diplôme in civil engineering at the University of Patras, Greece in 1979. He continued his education at Case Institute of Technology in Cleveland Ohio/USA, where he received his MS and Ph.D. in 1984. After two years at the research center for national defense in Athens he was nominated assistant professor at the University of Illinois in Chicago, associate in 1991 and full professor in 1995. In 1996, he was nominated professor of solids and structural mechanics at the EPFL. At EPFL he teaches mechanics of structures and mechanics of continuous media´ at the bachelors level and Fracture mechanics at the masters and doctoral levels. His research covers the mechanics of solids and structures, fracture mechanics and micromechanics of polymers, metals and their composites as well as biomechanics. He is also actively involved in full-filed optical methods for surface strain measurements as well as internal strain measurements using fiber Bragg grating sensors, aimed at characterizing micromechanics of fracture, residual strains and strain distribution in composite laminates for structural monitoring. Funding for his research comes from the Swiss National Science Foundation, State Secretariat for Education and Research and Swiss industry. He retired on February 28, 2020.
Guillaume Alexandre C OlikierExpertise
Optimisation continue, analyse numérique
Guillaume Olikier est chercheur postdoctoral (Instructeur Bernoulli) au sein de l'Institut de Mathématiques à l'EPFL. Il a obtenu un master d'ingénieur en mathématiques appliquées (2017) et un doctorat en sciences de l'ingénieur et technologie (2023) de l'UCLouvain, Louvain-la-Neuve, Belgique. De 2023 à 2025, il était chercheur postdoctoral (Starting Research Position) au centre Inria d'Université Côte d’Azur, Sophia Antipolis, France . Son principal domain
Emre TelatarEnseignement et PhD Doctorant·es actuel·les Serhat Emre Coban, Adway Girish, Ryan Yuanqing Song A dirigé les thèses EPFL de Aslan Tchamkerten, Stéphane Musy, Sibi Raj Bhaskaran Pillai, Robert Konsbruck, Dinkar Vasudevan, Eren Sasoglu, Mohammad Karzand, Alla Merzakreeva, Mine Alsan, Marc Desgroseilliers, Mani Bastani Parizi, Rajai Nasser, Serj Haddad, Elie Najm, Yunus Inan, Reka Inovan, Pierre Quinton A co-dirigé les thèses EPFL de Prasenjit Dey, Etienne Perron, Ayfer Özgür Aydin Cours Information theory
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. 