Giovanni De MicheliExpertise
Technologies de conception pour les systèmes intégrés, tels que la synthèse, le codesign de HW/SW et la conception de basse puissance. Technologies de conception des systèmes sur les plateformes hétérogènes comprenant les composants électriques, et biologiques.
En savoir plus
Consulter svp http://si2.epfl.ch/~demichel/
Enseignement et PhD A dirigé les thèses EPFL de Abhishek Garg, Mohamed Haykel Ben Jamaa, Francesco Zanini, Ciprian Seiculescu, Cristina Boero, Hu Xu, Andrea Cavallini, Shashi Kanth André ChatelExpertise
Micro and NanotechnologiesMicroelectronicsSolid State PhysicsQuantum Physics
Born in Aosta (Italy) in 1996, I obtained a 110L/110 Bachelor degree in Physical Engineering from Politecnico di Torino in 2018. I then followed a Master joined program in Nanotechnologies for ICTs, shared between PoliTO, INPG-Phelma and EPFL, getting graduated in 2020, with a 110L/110 score.In summer 2019, I joined Dr. Sallese group at EPFL-EDLAB to carry out an internship in modeling and simulation of radiation-induced
Paolo IennePaolo Ienne has been a Professor at the EPFL since 2000 and heads the Processor Architecture Laboratory (LAP). Prior to that, he worked for the Semiconductors Group of Siemens AG, Munich, Germany (which later became Infineon Technologies AG) where he was at the head of the Embedded Memories unit in the Design Libraries division. His research interests include various aspects of computer and processor architecture, FPGAs and reconfigurable computing, electronic design automation, and computer arithmetic. Ienne was a recipient of Best Paper Awards at the 20th, 24th, and 28th ACM/SIGDA International Symposia on Field-Programmable Gate Arrays (FPGA), in 2012, 2016 and 2020, at the 19th and 30th International Conference on Field-Programmable Logic and Applications (FPL), in 2009 and 2020, at the International Conference on Compilers, Architectures, and Synthesis for Embedded Systems (CASES), in 2007, and at the 40th Design Automation Conference (DAC), in 2003; many other papers have been candidates to Best Paper Awards in prestigious venues. He has served as general, programme, and topic chair of renown international conferences, including organizing in Lausanne the 26th International Conference on Field-Programmable Logic and Applications (FPL) in 2016. He serves on the steering committee of the IEEE Symposium on Computer Arithmetic (ARITH) and of the International Conference on Field-Programmable Logic and Applications (FPL). Ienne has guest edited a number of special issues and special sections on various topics for IEEE and ACM journals. He is regularly member of program committees of international workshops and conferences in the areas of design automation, computer architecture, embedded systems, compilers, FPGAs, and asynchronous design. He has been an associate editor of ACM Transactions on Architecture and Code Optimization (TACO), since 2015, of ACM Computing Surveys (CSUR), since 2014, and of ACM Transactions on Design Automation of Electronic Systems (TODAES) from 2011 to 2016.
Alireza MafiExpertise
Théorie de l'électromagnétismeAntennes et Micro-ondesCircuits Intégrés de RadiofréquenceRéseaux PhasésBioélectronique
Expertise
Théorie de l'électromagnétismeAntennes et Micro-ondesCircuits Intégrés de RadiofréquenceRéseaux PhasésBioélectronique
Je suis doctorant en Génie électrique à l'école Polytechnique Fédérale de Lausanne (EPFL). J'ai obtenu mon Master en Génie électrique (Communications Micro-ondes et Optiques) à l'Université de Technologie de Sharif, Téhéran, Iran, en 2022. J'ai également t
San YunExpertise
Transitions socio-environnementalesVulnérabilités urbaines multidimensionnellesEnsembles résidentiels de la seconde moitié du vingtième siècleConception intégrée de la rénovation
San Yun est architecte et doctorante, et mène une recherche sur comment la rénovation peut répondre aux vulnérabilités urbaines multidimensionnelles et améliorer l'habitabilité des ensembles de logements de la fin du XXe siècle. Elle a obtenu un Master of Science en Architecture avec un mineur en Design intégré, architect
Jean-Michel SalleseEnseignement et PhD Doctorant·es actuel·les Marta Macaluso A dirigé les thèses EPFL de Luca Gautero, Fengda Sun, Frédéric Zanella, Lucian Barbut, Farzan Jazaeri, Camillo Stefanucci, Jacopo Bronuzzi, Georgi Gorine, Chiara Rossi, Viros Sriskaran, Arnout Devos, Gennaro Termo A co-dirigé les thèses EPFL de Louis Harik, Fabrizio Lo Conte, Maria-Alexandra Paun, Anurag Mangla, Pranav Vivek Kulkarni Cours Electronique EE-280 Présentation des principaux composants de base de l'électronique.Analyse
Marco MattavelliEnseignement et PhD A dirigé les thèses EPFL de Christophe Clerc, Ruohua Zhou, Beilu Shao, Christophe Lucarz, Richard Thavot, Ab Al Hadi Bin Ab Rahman, Endri Bezati, Simone Casale Brunet, Malgorzata Michalska, Ana Angelica Hernandez Lopez, Aurélien Bloch, Mustafa Besirli, Ünsal Öztürk A co-dirigé les thèses EPFL de Sylvain Aguirre Cours Systems and architectures for signal processing EE-555 Etude des composants essentiels eessentiels et des technologies des systèmes de traitements des signau
Christophe BallifChristophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.
Demetri PsaltisEnseignement et PhD Doctorant·es actuel·les Victoria Fay, Colin Nikhil Christian A dirigé les thèses EPFL de Wuzhou Song, Alexandre Goy, Julien Cuennet, Ioannis Papadopoulos, Xin Yang, Grégoire Pierre Jean Laporte, Thomas Jean Victor Marie Lanvin, Seyyed Mohammad Hosseini Hashemi, Nicolino Stasio, Morteza Hasani Shoreh, Marilisa Romito, Pooria Hadikhani, Eirini Kakkava, Joowon Lim, Giulia Panusa, Ahmed Bassam Sayed Ayoub Mohamed Ayoub, Amirhossein Saba, Niyazi Ulas Dinç A co-dirigé les thèses EPFL de Ugur
Mohammad Amin ShokrollahiAmin Shokrollahi has worked on a variety of topics, including coding theory, computational number theory and algebra, and computational/algebraic complexity theory. He is best known for his work on iterative decoding algorithms of graph based codes, an area in which he holds a number of granted and pending patents. He is the co-inventor of Tornado codes, and the inventor of Raptor codes. His codes have been standardized and successfully deployed in practical areas dealing with data transmission over lossy networks.
Prior to joining EPFL, Amin Shokrollahi has held positions as the chief scientist of Digital Fountain, member of the technical staff at Bell Laboratories, senior researcher at the International Computer Science Insitute in Berkeley, and assistant professor at the department of computer science of the university of Bonn. He is a Fellow of the IEEE, and he was awarded the Best Paper Award of the IEEE IT Society in 2002 for his work on iterative decoding of LDPC code, the IEEE Eric Sumner Award in 2007 for the development of Fountain Codes, and the joint Communication Society/Information Theory Society best paper award of 2007 for his paper on Raptor Codes.
Mohammad Khaja NazeeruddinDr. Md. K. Nazeeruddin received M.Sc. and Ph. D. in inorganic chemistry from Osmania University, Hyderabad, India. He joined as a Lecturer in Deccan College of Engineering and Technology, Osmania University in 1986, and subsequently, moved to Central Salt and Marine Chemicals Research Institute, Bhavnagar, as a Research Associate. He was awarded the Government of Indias fellowship in 1987 for study abroad. After one year postdoctoral stay with Prof. Graetzel at Swiss federal institute of technology Lausanne (E P F L), he joined the same institute as a Senior Scientist. His current research focuses on Dye-sensitized solar cells, Hydrogen production, Light-emitting diodes and Chemical sensors. He has published more than 380 peer-reviewed papers, ten book chapters, and inventor of 40 patents. The high impact of his work has been recognized with invitations to speak at over 80 international conferences, including the MRS Fall (USA, 2006) and Spring 2011 Meetings, GORDON conference (2014), and has been nominated to the OLLA International Scientific Advisory Board. He appeared in the ISI listing of most cited chemists, and has more than 33'500 citations with an h-index of 89. He is teaching "Functional Materials" course at EPFL, and Korea University; directing, and managing several industrial, national, and European Union projects on Hydrogen energy, Photovoltaics (DSC), and Organic Light Emitting Diodes. He was awarded EPFL Excellence prize in 1998 and 2006, Brazilian FAPESP Fellowship in 1999, Japanese Government Science & Technology Agency Fellowship, in 1998, Government of India National Fellowship in 1987-1988. Recently he has been appointed as World Class University (WCU) professor by the Korea University, Jochiwon, Korea (http://dses.korea.ac.kr/eng/sub01_06_2.htm) and Adjunct Professor by the King Abdulaziz University, Jeddah, Saudi Arabia. Guillaume AnciauxEnseignement et PhD Doctorant·es actuel·les Parissasadat Alavi, Thibault Ghesquière-Diérickx A co-dirigé les thèses EPFL de Srinivasa Babu Ramisetti, Jaehyun Cho, Lucas Frérot, Mohit Pundir, Manon Eugénie Voisin--Leprince Cours Modélisation numérique des solides et structures CIVIL-321 La modélisation numérique des solides est abordée à travers la méthode des éléments finis. Les aspects purement analytiques sont d'abord présentés, puis les moyens d'interpolation, d'intégration et de résolu
Manuel Guizar SicairosEnseignement et PhD Doctorant·es actuel·les Aknur Karabay, Pengju Sheng, Wenxuan Fang Cours Physical Optics and Advanced Imaging PHYS-715
Francesco GramugliaFrancesco Gramuglia received the MEng degree in Electronics and Electrical Engineering from the Politecnico di Milano in 2016. From 2015 to 2016 he was a trainee in the STORMlab of Vanderbilt University, Nashville, Tennessee, where he worked on the development of robotic endoscope platforms. In 2016 he received the Best Application Prize and Overall Winner at Surgical Robot Challenge during the Hamlyn Symposium on Medical Robotics at Imperial College, London, 2016. Since 2017, he has been pursuing a Ph.D. degree at the EPFL in the Advanced Quantum Architecture laboratory (AQUA) under the advising of Prof. Edoardo Charbon and Claudio Bruschini, PhD. His research is focused on the design of SPAD based CMOS image sensors and system development for use in biomedical applications, e.g. Time-of-flight Positron emission tomography (TOFPET).
Pierre-André BesseEnseignement et PhD A dirigé les thèses EPFL de Klaus Ehrmann Cours La science quantique : une vision singulière MICRO-444 Les étudiants comprennent les caractéristiques de la science quantique. Ils en maitrisent le formalisme et l'appliquent dans les systèmes de base: puits, fils et boites quantiques, qubits. Physique des composants semiconducteurs MICRO-312 Les étudiants savent expliquer la physique des composants semiconducteurs, tels que diodes, transistors et composants
Mohamed BouriDr. Mohamed Bouri is a group leader of Rehabilitation and Assistive Robotics in LSRO and lecturer of Robotics and Industrial Robotics. He graduated in Electrical Engineering in 1992 and obtained his PhD degree in 1997 in Industrial Automation at INSA LYON, France. Since 1997, he is at EPFL and is mainly active in the field of robot control, automation and robot design for medical and industrial applications. He is the head of Rehabilitation and Assistive Robotics group since 2005 and has strong references with the development of robotic devices for lower limb rehabilitation : The MotionMaker and WalkTrainer commercialzed by the company Swortec. His ongoing research currently focuses on the development of exoskeletons and the associated control strategies. His main current projects are TWIICE, a lower limb exoskeleton for people with paraplegia, AUTONOMYO, a walk assistance exoskeleton for people with muscle weakness, and the HiBSO, a hip orthosis for elderly.
Auke IjspeertAuke Ijspeert is a full professor at the EPFL, and head of the Biorobotics Laboratory (BioRob). He has a B.Sc./M.Sc. in physics from the EPFL (1995), and a PhD in artificial intelligence from the University of Edinburgh (1999). He carried out postdocs at IDSIA and EPFL, and at the University of Southern California (USC). He then became a research assistant professor at USC, and an external collaborator at ATR (Advanced Telecommunications Research institute) in Japan. In 2002, he came back to the EPFL as an SNF assistant professor. He was promoted to associate professor in October 2009 and to full professor in April 2016. His primary affiliation is with the Institute of Bioengineering, and secondary affiliation with the Institute of Mechanical Engineering. His research interests are at the intersection between robotics, computational neuroscience, nonlinear dynamical systems, and machine learning. He is interested in using numerical simulations and robots to get a better understanding of sensorimotor coordination in animals, and in using inspiration from biology to design novel types of robots and adaptive controllers. (see for instance Ijspeert et al Science 2007, Ijspeert Science 2014, and Nyakatura et al Nature 2019). He is also investigating how to assist people with limited mobility using exoskeletons and assistive furniture. He is regularly invited to give talks on these topics (e.g. TED talk given at TED Global Geneva, Dec 8 2015). With his colleagues, he has received paper awards at ICRA2002, CLAWAR2005, IEEE Humanoids 2007, IEEE ROMAN 2014, CLAWAR 2015, SAB2018, and CLAWAR 2019. He is an IEEE Fellow, member of the Board of Reviewing Editors of Science magazine, and associate editor for the IEEE Transactions on Medical Robotics and Bionics and for the International Journal of Humanoid Robotics. He has acted as an associate editor for the IEEE Transactions on Robotics (2009-2013) and for Soft Robotics (2018-2021). He was a guest editor for the Proceedings of IEEE, IEEE Transactions on Biomedical Engineering, Autonomous Robots, IEEE Robotics and Automation Magazine, and Biological Cybernetics. He has been the organizer of 7 international conferences (BioADIT2004, SAB2004, AMAM2005, BioADIT2006, LATSIS2006, SSRR2016, AMAM2019), and a program committee member of over 50 conferences.
Diego Ruben BarrettinoDiego Barrettino received the Dipl.-Ing. degree in Electronic Engineering from the University of Buenos Aires, Argentina, in 1997, and the Ph.D. degree in Electrical Engineering from the Swiss Federal Institute of Technology Zurich (ETHZ), Switzerland, in 2004. From 1997 to 2000, he worked in Allegro MicroSystems, Inc., where he was an Analog IC Designer of Hall-effect magnetic sensors. From 2000 to 2004, he was a Research Assistant at ETHZ. In 2004, he was a Postdoctoral Research Associate in the Universit
