Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Enseignement et PhD Doctorant·es actuel·les Nicola Carrara, Berlind Vosberg, Maja Lopandic, Sneha Cheriyamparambil, Thanh Thi Hà Lê, Suqiu Jiang, Adam William Woodhouse, Kunita Numabe A dirigé les thèses EPFL de Stefano Tugulu, Markus Scholl, Harald Nuhn, Nadja Franz, Raphaël Barbey, Bojana Portmann, Maarten Danial, Dusko Paripovic, Sanhao Ji, Nicolas Bertrand Schüwer, Zuzana Kadlecova, Görçin Görkem Sahin Kurtuldu, Caroline Sugnaux, Sole
Anastasios VassilopoulosEnseignement et PhD Doctorant·es actuel·les Filippo Mannino, Joseph Vincent Arnaud Bernaert, Seyed Shayan Khalooei Tafti A dirigé les thèses EPFL de Alireza Farajzadeh Moshtaghin, Abdolvahid Movahedirad, Dharun Vadugappatty Srinivasan A co-dirigé les thèses EPFL de Ye Zhang, Behzad Dehghan Manshadi, Omar Moussa, Roohollah Sarfaraz Khabbaz, Moslem Shahverdi, Wei Sun, Haifeng Fan, Maria Savvilotidou, Myrsini Angelidi, Aida Cameselle Molares, Niloufar Vahedi, Jialiang Fan, Congzhe Wang Cours Advanced compo
Sandrine GerberSandrine Gerber studied chemistry at the "Ecole Nationale Supérieure de Chimie de Paris" in France, where she obtained a diploma of chemical engineer in 1993. The same year she obtained a DEA (Master degree) of organic chemistry at the University Pierre et Marie Curie (Paris VI, France). From 1993 to 1996 she did a PhD in organic chemistry under the supervision of Prof. Jean-Pierre Genêt at the Ecole Nationale Supérieure de Chimie de Paris. In 1996, she moved to University of Lausanne for a post-doctoral stay under the supervision of Prof. Pierre Vogel. In 1998, she was appointed Maître-Assistante at the Institute of Organic Chemistry in the University of Lausanne. In 2003, she obtained the habilitation to direct research from the University Pierre et Marie Curie (Paris VI, France). The same year, she was appointed scientific adjunct at the EPFL and senior scientist (Maître d'Enseignement et de Recherche) in 2006. In December 2014, she was promoted to titular professor. Since September 2007, Sandrine Gerber is deputy to the director of the Institute of Chemical Sciences and Engineering (ISIC). She is also member of the Board of Directors of the Swiss Chemical Society. Since 2007, Sandrine Gerber is part-time lecturer at the university of Fribourg. She was awarded the Prize Eugene Schueller in 1997, the Prize Dufour for prospective organic chemistry in 2005 and the Werner Prize 2010. She also received a special mention in recognition of exceptional quality of pedagogic competencies in the teaching of basic sciences, given by the Direction of the School of Biology and Medicine from the University of Lausanne, in 2013. In October 2018, she will receive the Prize for Excellence in Teaching from the section of Chemistry and Chemical Engineering.
Arnaud BertschExpertise
MicrostereolithographiePhotopolymersMicrofabrication
Enseignement et PhD Doctorant·es actuel·les Tao Zhang, Pol Torres Vila, Nicolas Bruno Minazzo A co-dirigé les thèses EPFL de Joan Teixidor, Clémentine Sophie Sarah Lipp, Nicolas Grégoire Maïno, Jiande Zhou, Jongeon Park Cours Advanced microfabrication practicals MICRO-373 Ce TP permet une formation approfondie sur les méthodes avancées de micro et nanofabrication dans un environnement de salle blanche pour des applications séle
Dominique BonvinDominique Bonvin is Professor and Director of the Automatic Control Laboratory of EPFL. He received his Diploma in Chemical Engineering from ETH Zürich, and his Ph.D. degree from the University of California, Santa Barbara. He worked in the field of process control for the Sandoz Corporation in Basel and with the Systems Engineering Group of ETH Zürich. He joined the EPFL in 1989, where his current research interests include modeling, control and optimization of dynamic systems. He served as Director of the Automatic Control Laboratory for the periods 1993-97, 2003-2007 and again since 2012, Head of the Mechanical Engineering Department in 1995-97 and Dean of Bachelor and Master Studies at EPFL for the period 2004-2011.
Alain NussbaumerExpertise
Structures métalliquesVerre structuralFatigue et mécanique de la ruptureEvaluation de structures existantesRupture à faible nb de cycles
Mission
RECHERCHE: Responsable du domaine de recherche « fatigue et rupture des structures en acier ». Expert dans les domaines de la fatigue et rupture de structures en acier, aluminium et verre, sécurité et aptitude au service, ainsi que les éléments composés de plusieurs matériaux.Habilité à diriger des thèses de doctorat depuis 2005.ENSEIGNEMENT: Responsable
Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
Daryl Yee Wei LiangIncoming Assistant Professor of Electrical and Microengineering (March 2023)
Hubert GiraultEducation: 1979 - Engineering diploma from Grenoble Institute of Technology. FRANCE. 1982 - PhD- Department of Chemistry, University of Southampton. Thesis entitled : Interfacial studies using drop image processing techniques. Positions : 1982 - 1984 SERC Research Fellow. University of Southampton. 1984 - 1985 CNRS Research Fellow. University of Southampton. 1985 - 1992 Lecturer in Physical Chemistry, University of Edinburgh. 1992 - Professor of Physical Chemistry, Ecole Polytechnique Fédérale de Lausanne. 2011 - 2014 Dean of Bachelor and Master studies Hubert Girault is the author of 2 textbooks, the co-author of about 600 scientific publications with more than 20'000 citations and the co-inventor of more than 15 patents. During his academic career, he has supervised 70 PhD students. 30 alumni of his laboratory are now Professors. Honours: Faraday medal 2006, Royal Society of Chemistry, Fellow of the International Society of Electrochemistry 2007, Reilley Award 2015. Fellow of the Electrochemical Society (USA), Shikata International medal, Polarography Society of Japan. Associate editor of Chemical Science
Li TangEducation and Training Postdoctoral Fellow, Massachusetts Institute of Technology, 2013 - 2016 Ph.D., University of Illinois at Urbana-Champaign, 2007 - 2012 B.S., Peking University, 2003-2007
Christophe BallifChristophe Ballif is director of the Phototovoltaics and Thin Film Electronics Laboratoryb) (PV-Lab at the institute of microengineering (IMT) in Neuchâtel (part of the EPFL since 2009). The lab focus is on the science and technology of high efficiency heterojunction crystalline cells,so-called passivating contacts for solar cells, multi-junction solar cells include novel generation Perovskite on innovative optical high speed detector and on various macroelectronics application. It also deals with energy management with a focus on integration of solar electricity into the energy system. The PV-Lab has strongly contributed to technology transfer and industrialization of novel devices and full technology with numerous companies. Christophe Ballif graduated as a physicist from the EPFL in 1994, where he also obtained in 1998 his Phd degree working on novel PV materials. He accomplished his postdoctoral research at NREL (Golden, US) on compound semiconductor solar cells (CIGS and CdTe). He worked then at the Fraunhofer ISE (Ge) on crystalline silicon photovoltaics (monocrystalline and multi-crystalline) until 2003 and then at the EMPA in Thun (CH) before becoming full professor at the University of Neuchâtel IMT in 2004, taking over the chair of Prof. A. Shah. Since 2013, C.Ballif is also the director of the new CSEM PV-Center, also located in Neuchâtel. The CSEM PV-Center is focussing more on industrialisation and technology transfer in the field of solar energy, including solar electricity management and storage. At the core of the CSEM PV-center activities lies several "pilot lines" for various kinds of solar cells manufacturing, with a focus coating technologies, wet chemistry processes for crystalline silicon, metalisation techniques for solar cells, and a platform for developing "ideal packaging solutions and polymers" for PV modules. In addition, joined facitilites between CSEM and EPFL of over 800 m2 are available for modules manufacturing, measuring and accelerated aging. CSEM PV-center has also full team dedicated to storage and energy systems and operates a joined center with BFH in Biel for research on electrochemical storage. He (co-) authored over 500 journal and technical papers, as well as several patents. He is an elected member of the SATW, member of the scientific council of the Swiss AEE, and member of the board of the EPFL Energy center. In 2016, he recieved the Becquerel prize for his contributions to the field of high efficiency photovoltaics.
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Arne SeitzEnseignement et PhD Cours Advanced Microscopy for Life Science BIO-659 For further information, please get in contact with the instructor or have a look on the following web-site: http://biop.epfl.ch/ Bioimage informatics BIO-410 Le cours fournit une complète revue des méthodes, algorithmes et des outils logiciels utilisés en analyse d'images biologiques. Il expose les concepts fondamentaux et les solutions informatiques permettant d'extraire des informations quantitatives à Graham KnottEnseignement et PhD Cours Methods: from disease models to therapy BIOENG-518 Ce cours décrira les méthodes qui sont à la base des approches translationnelles depuis la génération et la caractérisation des modèles des maladies jusqu'aux applications thérapeutiques. Les bases théoriques seront complétées par des rotations pratiques dans les plateformes technologiques.
Rosane Moura Dos Santos BarrettinoExpertise
Rosane Moura Dos Santos received the Diploma in Chemical Engineering from the Federal University of Bahia (UFBA), Brazil, in 2008, the MSc. degree of Science in Engineering from the University of Applied Sciences and Arts of Southern Switzerland (SUPSI), Switzerland, in 2011, and the Ph.D. in Materials Science and Technology from the Polytechnic of Turin, Italy, in 2015.She worked in UFBA, from 2004 to 2007, where she was a Research Technician. From May to August 2007, she went to Imperial College
Thierry MeyerOriginaire de Genève, né en 1961, Thierry Meyer reçoit en 1986 son diplôme (MSC) dingénieur chimiste de lEcole Polytechnique Fédérale de Lausanne (EPFL). Il reçoit en 1989 son doctorat (PhD) à EPFL pour sa thèse sur le micromélange dans des milieux fortement visqueux. Il rejoint l'institut du génie chimique de 1989 jusqu'à 1993 en tant que scientifique senior dans le domaine des réactions de polymérisation. Il entre, en 1994, à la division " Pigments " de Ciba-Geigy SA, où il travaille au développement et à la mise en production de plusieurs pigments de hautes performances. Il assume la fonction de chef de projets pour l'introduction de nouveaux pigments en fabrication. En 1997, il est nommé chef de fabrication pour la production de la division pigments de Ciba Spécialités Chimiques SA à Monthey. Il est pendant cette même période nommé chargé de cours à l'EPFL. Retournant à l'institut du génie chimique d'EPFL à Lausanne vers la fin de 1998, il a été nommé « d'enseignement de maître et de recherche » (MER) pour mener un nouveau groupe de recherche dans le domaine des polymères et les fluides supercritiques, et enseigner aux chimistes, ingénieurs chimistes et en sciences des matériaux, les disciplines telles que le développement de procédés, l'introduction au génie chimique, le chimie organique et des polymères au programme de bachelor et master. En 2005 il assume la responsabilité du service de Sécurité et Santé au Travail de la faculté des sciences de base en plus de ses activités de recherches traitant de la gestion des risques (risk management) et des fluides supercritiques. Il enseigne actuellement l'introduction au génie chimique au niveau bachelor, le risk management au niveau master et des cours de formation continue dans le domaine de la sécurité (safety) et de la gestion des risques (engineering risk management). Il agit également comme consultant et expert en matière de risk management et génie chimique auprès du tribunal de l'ICC (chambre de commerce internationale) du World Business Organization, auprès de plusieurs bureaux d'études et de consultants ainsi quauprès dindustries. Thierry Meyer est actuellement membre de plusieurs associations internationales de la fédération Européenne du génie chimique et de la société chimique Américaine et American Institute of Chemical Engineers. Il a été élu Président de la European Working Party on Polymer Reaction Engineering de 2001 jusqu'à 2006. Il est actuellement le représentant académique Suisse dans la European Working Party on Loss Prevention and Safety Promotion et dans la European Working Party on Education. Il est membre de plusieurs editorial boards: Chemical Engineering Research and Design, Macromolecular Reaction Engineering, Chemical Engineering and Technology, Journal of Chemical Health and Safety.
Marco MattavelliEnseignement et PhD A dirigé les thèses EPFL de Christophe Clerc, Ruohua Zhou, Beilu Shao, Christophe Lucarz, Richard Thavot, Ab Al Hadi Bin Ab Rahman, Endri Bezati, Simone Casale Brunet, Malgorzata Michalska, Ana Angelica Hernandez Lopez, Aurélien Bloch, Mustafa Besirli, Ünsal Öztürk A co-dirigé les thèses EPFL de Sylvain Aguirre Cours Systems and architectures for signal processing EE-555 Etude des composants essentiels eessentiels et des technologies des systèmes de traitements des signau
Jean-Michel SalleseEnseignement et PhD Doctorant·es actuel·les Marta Macaluso A dirigé les thèses EPFL de Luca Gautero, Fengda Sun, Frédéric Zanella, Lucian Barbut, Farzan Jazaeri, Camillo Stefanucci, Jacopo Bronuzzi, Georgi Gorine, Chiara Rossi, Viros Sriskaran, Arnout Devos, Gennaro Termo A co-dirigé les thèses EPFL de Louis Harik, Fabrizio Lo Conte, Maria-Alexandra Paun, Anurag Mangla, Pranav Vivek Kulkarni Cours Electronique EE-280 Présentation des principaux composants de base de l'électronique.Analyse
Diego Ruben BarrettinoDiego Barrettino received the Dipl.-Ing. degree in Electronic Engineering from the University of Buenos Aires, Argentina, in 1997, and the Ph.D. degree in Electrical Engineering from the Swiss Federal Institute of Technology Zurich (ETHZ), Switzerland, in 2004. From 1997 to 2000, he worked in Allegro MicroSystems, Inc., where he was an Analog IC Designer of Hall-effect magnetic sensors. From 2000 to 2004, he was a Research Assistant at ETHZ. In 2004, he was a Postdoctoral Research Associate in the Universit
