Emmanuelle Anne Boehm CourjaultEnseignement et PhD A co-dirigé les thèses EPFL de Solène Anne-Lise Albinski Cours Matériaux MSE-171 Une introduction à la science des matériaux appliquée aux matériaux de construction courants, en particulier le béton et les métaux. Description de leur fabrication, leurs comportements mécanique et thermique et leur utilisation en construction. Matériaux de construction + TP MSE-322 Science des matériaux de construction non métalliques les plus utilisés et plus particulièreme
César PulgarinExpertise
Mechanistic study of Advanced Oxidation Processes AOPs (i.e. electrochemical, TiO2 photo-assisted, ultrasound, photo-Fenton) and their combinations for chemical and biological pollutants treatment in industrial and domestic wastewaterAction mode of solar light during inactivation of bacteria and virus in water and surfaces. Coupling of biological and AOP systems for industrial waste-waters treatmentDesign, preparation, chemical characterization, activity evaluation and mechanistic description of (
Meret AeppliEnseignement et PhD Doctorant·es actuel·les Bence Dienes, Emma Lorraine Defrang, Elisa Berger, Michelangelo Vuono Cours Environmental chemistry ENV-200 Ce cours fournit aux étudiants une vue d'ensemble sur les bases de la chimie de l'environnement: chimie des systèmes naturels et le devenir des produits chimiques anthropiques dans les systèmes naturels. Il permet aux étudiants d'appliquer les concepts chimiques généraux aux systèmes naturels. Fate and behaviour of environmental contamina
Dominique PiolettiDominique Pioletti received his Master in Physics from the Swiss Federal Institute of Technology Lausanne (EPFL) in 1992. He pursued his education in the same Institution and obtained his PhD in biomechanics in 1997. He developed original constitutive laws taking into account viscoelasticity in large deformations. Then he spent two years at UCSD as post-doc fellow acquiring know-how in cell and molecular biology. He was interested in particular to gene expression of bone cells in contact to orthopedic implant. In April 2006, Dominique Pioletti was appointed Assistant Professor tenure-track at the EPFL and is director of the Laboratory of Biomechanical Orthopedics. His research topics include biomechanics and tissue engineering of musculo-skeletal tissues; mechano-transduction in bone; development of orthopedic implant as drug delivery system. Since 2013, he has been promoted to the rank of Associate Professor.
Eleni StavropoulouCurrent work
CO2 storage (geological sequestration)Caprock characterisationExperimental study of interfaces of geomaterialsMicro-structural study of geomaterials with in-situ 3D imaging
Dr. Eleni Stavropoulou is leading the Carbon Capture and Storage (CCS) activities of the Laboratory of Soil Mechanics (LMS) in EPFL. She received her PhD in Geomechanics in 2017 from the University Grenoble Alpes (France).Her research has been focusing on the characterisation of natural geomaterials in the context of contemp
Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Karen ScrivenerDe nationalité anglaise, Karen Scrivener est née en 1958. Au cours de sa carrière, ses travaux et sa recherche traitaient des domaines suivants: Identification du développement microstucturale pendant l'hydratation du ciment. Elaboration d'une approche multitechnique pour étudier la microstucture des ciments et bétons, avec accent sur la quantification par analyse des images d'électrons retrodiffusés. Caractérisation de l'auréole de transition de la pâte de ciment autour des granulats. Compréhension des processus de dégardation des bétons, en particulier le gonflement lié à la formation de l'éttringite retardée dans les bétons étuvés.
Janet Gordon HeringExpertise
Biogeochemical cycling of trace metals and metalloids Mineral weathering and reactions at mineral surfaces Water treatment processes for removal of inorganic contaminants
Education Massachusetts Institute of Technology/ Woods Hole Oceanographic Institution Joint Program, Cambridge, MA, Ph.D. in Oceanography, May1988. Harvard University, Cambridge, MA, A.M. in Chemistry, January 1981. Cornell University, Ithaca, NY, A.B. in Chemistry, June 1979.Professional Experience Swiss Federal Institute of A
Christian Ludwig2005 - today: Adjunct Professor at EPFL in the field of Solid Waste Treatment and head of the Chemical Processes and Materials research group (CPM) at Paul Scherrer Institute (PSI). Joint EPFL-PSI Professorship on Solid Waste Treatment. 2000 - today: Head, Group of Chemical Processes and Materials (CPM) at Paul Scherrer Institut (PSI). In 2009 the LEM unit was closed and the CPM group is now affiliated to the Bioenergy and Catalysis Laboratory (LBK) of the Energy and Environment Research Division (ENE). Since June 2002 permanent position ("tenure"). 1997 - 1999: Senior Scientist. Paul Scherrer Institut (PSI), General Energy Research Department, Element Cycles Section. 1995 - 1997: Research Fellow. Swiss Federal Institute for Environmental Science and Technology (EAWAG), Department of Resource and Waste Management. 1993 - 1995: Post-doc Fellow. University of California Davis, Department of Land, Air, and Water Resources (LAWR). 1990 - 1993: PhD Student. University of Berne, Department of Inorganic, Analytical, and Physical Chemistry. 1989 - 1990: Master Student. University of Berne, Department of Inorganic, Analytical, and Physical Chemistry.
Albert RenkenEnseignement et PhD A dirigé les thèses EPFL de Serge Maeder, Jacques Membrez, Stéphane Porchet, Philippe Menoud, Brigitta Frank, Harvey Randall, Wolfgang Zimmerer, Frédéric Van Vyve, Serge Golay, Jianzhong Yang, Stéphane Dubuis, Philippe Warnery, Anders Nattorp, Christian Spühler, Laurent Cavin, Miriam Lorenzi, Bastien Monnerat, André Rouge, Olivier Wolfrath, Peter Stahl, Ralf Maurer, Konrad Geissler, Volker Höller, Benoît Louis, Pierre Reuse, Fabio Rainone, Eric Joannet, Chrystèle Horny A co-dirigé les th
Franco Alberto Zunino SommarivaFranco Zunino is a scientist and Swiss National Science Foundation (SNSF) fellow at the Physical Chemistry of Building Materials (PCBM) at ETH Zürich group since 2022. He obtained his PhD in Materials Science and Engineering from the école Polytechnique Fédérale de Lausanne (EPFL) in 2020, within the group of Prof. Karen Scrivener. His doctoral thesis was recognized in 2021 with the Nanocem 2020 prize, awarded to the best thesis in the field of cement and concrete science worldwide by a panel of internation
Arnaud MagrezEducation
PhD., Materials Science, summa cum laude, Université de Nantes, 2002
M.S., Chemistry, Université des Sciences et Technologies de Lille, 1999
Academic positions
Head of the Crystal Growth Facility, EPFL, 2012-present
Research Associate, Laboratoire de Physique de la Matière Complexe, EPFL, 2003-2012
Research Fellow, Peter Grunberg Institute, FZ-Juelich, 2002-2003
Administrative positions at EPFL
Scientific staff member, EPFL Assembly, 2015-present
Scientific staff member, School Council SB, 2014-present
Member of the IPHYS office 2016-present
Member of the ICMP office 2012-2015
Member of the safety committee of ICMP 2010-2015
Arnaud BertschExpertise
MicrostereolithographiePhotopolymersMicrofabrication
Enseignement et PhD Doctorant·es actuel·les Tao Zhang, Pol Torres Vila, Nicolas Bruno Minazzo A co-dirigé les thèses EPFL de Joan Teixidor, Clémentine Sophie Sarah Lipp, Nicolas Grégoire Maïno, Jiande Zhou, Jongeon Park Cours Advanced microfabrication practicals MICRO-373 Ce TP permet une formation approfondie sur les méthodes avancées de micro et nanofabrication dans un environnement de salle blanche pour des applications séle
Marianne LiebiEnseignement et PhD Doctorant·es actuel·les Atreyee Acharya, Dominique Olivier Windisch, Sici Wang, Torne Tänzer, Else Linnea Rensmo, Carolina Gutierrez Bolaños Cours Material science at large scale facilities MSE-435 Ce cours donne une introduction à la recherche sur les matériaux utilisant les rayons X et les neutrons. Après une introduction aux grands instruments de recherche, nous plongerons dans les différentes méthodes, y compris des exemples d'application dans divers domaines de la
Philippe BuffatBorn in Lausanne (Switzerland) in 1942. EPUL physics engineer diploma in 1967 and EPFL PhD in physics in 1976. From 1966 he studies at the Experimental Physics Laboratory (Prof. J.P. Borel) the physical properties peculiar to the very small size metal crystals and gets a PhD degree for his thesis "Abaissement de la température de fusion de petits cristaux d'or par effet de taille thermodynamique" (Lowering of the melting temperature of small gold crystals by thermodynamic size effect). In 1971, he starts to develop an electron microscopy facility available to all EPFL students and researchers (nowadays Centre Interdisciplinaire de Microscopie Electronique CIME) that he manages till 2007. In parallel he teaches the principles of electron microscopy and the Experimental methods of physics at the Physics/Basic Sciences School (SB). In addition, he trains a large part of the facility users. Honorary professor BS/EPFL he carries-out a free-lance research at CIME and in collaboration with the Institute of Crystallography of the Russian Academy of Sciences (ICRAS, Moscow) and the International Centre of Electron Microscopy for Material Science (IC-EM AGH Krakow) This activity covers all the techniques related to transmission and scanning electron microscopy applied to materials science and solid-state physics. His interest is directed towards the structure of nanocrystals, their size effects and behavior under strong electron irradiation, the phase transitions in perovskites, the characterization of nanophases, multilayer and interface structures of crystalline materials and bioceramics. More recently a large research part has moved to understanding/pointing-out the adequacy between the limits of the instruments and their interpretation means in regard of their use in a multiusers facility with a large turnover and a wide range of materials/structures. He is past-president (2006-2007) of the Société Française des Microscopies (Sfµ), honorary member of the Sfµ and of the Swiss Society of Optics and Microscopy (SSOM).
Ivica ZivkovicEnseignement et PhD Doctorant·es actuel·les Berna Esmer A co-dirigé les thèses EPFL de Virgile Favre, Bhushan Hegde, Yikai Yang Cours Magnetism in materials PHYS-491 Ce cours introduit au magnétisme dans les matériaux, couvrant les principes fondamentaux des degrés de liberté de spin et d'orbite, les interactions entre les moments et certains modèles d'ordre typiques. Des techniques expérimentales et leur application dans la recherche actuelle sont présentées.
