Franz-Josef HaugI studied Physics between 1990 and 1996 at the Universities of Ulm (Germany) and Waikato (New Zealand). While specializing mostly on Theoretical Physics and Quantum Theory during my studies, I turned towards Experimental Physics for a graduate work on gas-phase epitaxy of silicon. After that, I pursued a PhD program at ETH Zürich (Switzerland), studying Cu(In,Ga)Se2 solar cells. As PostDoc, I went to EMPA (Switzerland) to work on plasma processes for hard coatings of TiN and to the Jülich Research Centre in Germany to study light scattering ZnO front contacts for solar cells. In 2005 I joined the Institute of Microengineering (IMT) at the University of Neuchatel to lead a research group on thin film silicon solar cells within the PV-Lab. In 2009 the IMT was integrated into EPFL. My main research interests are optics, charge transport in semiconductors and renewable energy in general. My current work is devoted to passivating contacts for crystalline silicon solar cells, using thin silicon films as contact layers. In 2015 I was appointed Maitre d'Enseignement et Recherche (Senior Lecturer and Scientist) and member of the Faculty of STI. From 2013 to 2015 I was member of the EFPL Teachers Council (CCE) and from 2016 and 2018 I was elected into the Council of the Engineering School (CF-STI). In 2020 I was elected to become a member of CF-STI. My main objective for the legislature is to represent the role of EPFL's intermediate staff and to raise the awareness for concerns of the satellite campuses.
Robin MartinEnseignement et PhD Cours Engineering of musculoskeletal system and rehabilitation BIO-687
Katrin BeyerSince 2017 Associate Professor, School of Architecture, Civil and Environmental Engineering (ENAC), EPFL. Head of the Earthquake Engineering and Structural Dynamics (EESD) Laboratory
2010-2017 Assistant Professor, EPFL.
2008-2010 Post-doctoral researcher, ETH Zürich.
2003-2007 Ph.D., Roseschool / Università di Pavia, Italy.
2001-2003 Ove Arup & Partners, Advanced Technology and Research Group, London.
2001 Diploma, Civil engineering, ETH Zürich.
Sébastien VaucherEnseignement et PhD A co-dirigé les thèses EPFL de Thomas Alexandre, Kwanghoon Choi Cours Materials selection MSE-474 Approche systématique et générale pour déterminer le meilleur matériau pour une application donnée, compte tenu des contraintes mécaniques, thermiques, écologiques, économiques, etc... Exemples pratiques à l'aide d'une base de données et d'une interface graphique développées par Mike Ashby.
Annapaola ParrilliEnseignement et PhD Cours Non-destructive methods for industry and research MSE-668
Michael StuerEnseignement et PhD Doctorant·es actuel·les Katerina Urbancová, Annalena Erlacher Cours Advanced ceramic technologies MSE-495 Des concepts et des technologies avancés de traitement des céramiques seront présentés. Les étudiants apprendront des concepts sur les matériaux céramiques avancés technologiquement pertinents pour une large gamme d'applications allant des MedTech à la conversion et au stockage de l'énergie ... Ingénierie des matériaux II MSE-215 Après les polymères
Mounir Driss MensiEnseignement et PhD Cours Advanced Solid State and Surface Characterization CH-633 Characterization of Materials 2025 MSE-716
Guillaume AnciauxEnseignement et PhD Doctorant·es actuel·les Parissasadat Alavi, Thibault Ghesquière-Diérickx A co-dirigé les thèses EPFL de Srinivasa Babu Ramisetti, Jaehyun Cho, Lucas Frérot, Mohit Pundir, Manon Eugénie Voisin--Leprince Cours Modélisation numérique des solides et structures CIVIL-321 La modélisation numérique des solides est abordée à travers la méthode des éléments finis. Les aspects purement analytiques sont d'abord présentés, puis les moyens d'interpolation, d'intégration et de résolu
Pablo Antolin SanchezEnseignement et PhD Doctorant·es actuel·les Philipp Christoph Weder, Davor Dobrota A co-dirigé les thèses EPFL de Ondine Chanon Cours Analysis III MATH-202(c) Le cours étudie les concepts fondamentaux de l'analyse vectorielle et de l'analyse de Fourier-Laplace en vue de leur utilisation pour résoudre des problèmes pluridisciplinaires d'ingénierie scientifique. Analysis III (for IC) MATH-203(d) Le cours étudie les concepts fondamentaux de l'analyse vectorielle et de l'analys
Berend SmitEnseignement et PhD Doctorant·es actuel·les Anastasia Blokhina, Raluca-Ana Kessler, Seyed Amirmohammad Elahi, Juliette Veronique Schleicher, Yutao Li, Xin Jin, Sara Bassetta, Beatriz Bueno Mouriño A dirigé les thèses EPFL de Samantha Lynn Anderson, Daniele Ongari, Andrzej Gladysiak, Seyedmohamad Moosavi, Arunraj Chidambaram, Bardiya Valizadeh, Stavroula Kampouri, Fatmah Ebrahim, Fatma Pelin Uran, Andres Adolfo Ortega Guerrero, Kevin Maik Jablonka, Elias Moubarak, Sauradeep Majumdar, Miriam Jasmin Pougin,
Jérémy GenoudEnseignement et PhD Doctorant·es actuel·les Constant Philippe Panisset Cours Physique générale : thermodynamique PHYS-106(b) Le but du cours de Physique générale est de donner à l'étudiant les notions de base nécessaires à la compréhension des phénomènes physiques. L'objectif est atteint lorsque l'étudiant est capable de prévoir quantitativement les conséquences de ces phénomènes avec des outils théoriques appropriés
Konstantin MikityukEnseignement et PhD Doctorant·es actuel·les Diego Mondaray Muñoz, Alessio Rossi, Julia Janina Swiatkowska A dirigé les thèses EPFL de Rodrigo Gonzalez Gonzaga De Oliveira, Janos Bodi, Mohamed Aly Hashem Mohamed Sayed, Vincenzo Anthony Di Nora A co-dirigé les thèses EPFL de Vladimir Vladimirov Brankov
Andreas MortensenAndreas Mortensen is currently Professor and Director of the Institute of Materials at the Swiss Federal Institute of Technology in Lausanne (EPFL), where he heads the Laboratory for Mechanical Metallurgy. He joined the faculty of EPFL 1997 after ten years, from 1986 to 1996, as a member of the faculty of the Department of Materials Science and Engineering at the Massachusetts Institute of Technology, where he held the successive titles of ALCOA Assistant Professor, Associate Professor, and Professor. His research is focussed on the processing, microstructural development and mechanical behavior of advanced metallic materials with particular focus on metal matrix composites and metal foams, on infiltration processing and capillarity, and on damage and fracture in metallic materials. He is author or co-author of two monographs, around one hundred and eighty scientific or technical publications and twelve patents. Born in San Francisco in 1957, of dual (Danish and US) nationality, Andreas Mortensen graduated in 1980 from the Ecole Nationale Supérieure des Mines de Paris with a Diplôme dIngénieur Civil, and earned his Ph.D. in the Department of Materials Science and Engineering at MIT in 1986. Besides his academic employment, he was a postdoctoral researcher at Nippon Steel during part of 1986, and was invited professor at the Ecole des Mines in Paris during the academic year 1995 to 1996. He is a member of the editorial committee of International Materials Reviews and has co-edited four books. He is a Fellow of ASM, a recipient of the Howe Medal and the Grossman Award of the American Society of Metals, was awarded the Péchiney Prize by the French Academy of Sciences and the Res Metallica Chair from the Katholieke Universiteit Leuven, received three EPFL teaching awards, is one of ISIs Highly Cited authors for Materials Science since 2002 and was awarded an ERC advanced grant in 2012.
Stéphanie LacourStéphanie P. Lacour holds the Bertarelli Foundation Chair in Neuroprosthetic Technology in the School of Engineering at EPFL and leads the Laboratory for Soft Bioelectronic Interfaces. She received her PhD in Electrical Engineering from INSA de Lyon, France, and completed postdoctoral research at Princeton University and the University of Cambridge. She is the recipient of the 2006 MIT TR35, a University Research Fellowship of the Royal Society, European Research Council ERC Starting and POC Grants, and a SNSF-ERC Consolidator Grant. She was elected a 2015 Young Global Leader by the World Economic Forum.
