Jürgen BruggerI am a Professor of Microengineering and co-affiliated to Materials Science. Before joining EPFL I was at the MESA Research Institute of Nanotechnology at the University of Twente in the Netherlands, at the IBM Zurich Research Laboratory, and at the Hitachi Central Research Laboratory, in Tokyo, Japan. I received a Master in Physical-Electronics and a PhD degree from Neuchâtel University, Switzerland. Research in my laboratory focuses on various aspects of MEMS and Nanotechnology. My group contributes to the field at the fundamental level as well as in technological development, as demonstrated by the start-ups that spun off from the lab. In our research, key competences are in micro/nanofabrication, additive micro-manufacturing, new materials for MEMS, increasingly for wearable and biomedical applications. Together with my students and colleagues we published over 200 peer-refereed papers and I had the pleasure to supervise over 25 PhD students. Former students and postdocs have been successful in receiving awards and starting their own scientific careers. I am honoured for the appointment in 2016 as Fellow of the IEEE “For contributions to micro and nano manufacturing technology”. In 2017 my lab was awarded an ERC AdvG in the field of advanced micro-manufacturing.
Jean-François MolinariProfessor J.F. Molinari is the director of the Computational Solid Mechanics Laboratory (http://lsms.epfl.ch) at EPFL, Switzerland. He holds an appointment in the Civil Engineering institute, which he directed from 2013 to 2017, and a joint appointment in the Materials Science institute. He started his tenure at EPFL in 2007, and was promoted to Full Professor in 2012. He is currently an elected member of the Research Council of the Swiss National Science Foundation in Division 2 (Mathematics, Natural and Engineering Sciences), and co editor in chief of the journal Mechanics of Materials. J.F. Molinari graduated from Caltech, USA, in 2001, with a M.S. and Ph.D. in Aeronautics. He held professorships in several countries besides Switzerland, including the United States with a position in Mechanical Engineering at the Johns Hopkins University (2000-2006), and France at Ecole Normale Supérieure Cachan in Mechanics (2005-2007), as well as a Teaching Associate position at the Ecole Polytechnique de Paris (2006-2009). The work conducted by Prof. Molinari and his collaborators takes place at the frontier between traditional disciplines and covers several length scales from atomistic to macroscopic scales. Over the years, Professor Molinari and his group have been developing novel multiscale approaches for a seamless coupling across scales. The activities of the laboratory span the domains of damage mechanics of materials and structures, nano- and microstructural mechanical properties, and tribology. Frank NüeschTeaching & PhD PhD Students Elodie Didier, Ceren Mitmit, João Pedro Ferreira Assunção, Vahid Charkhesht Past EPFL PhD Students Hui Zhang, Simon Johannes Dünki, Yee Song Ko, Lei Wang, Sandra Christina Jenatsch, Nicolas Alexandre Serge Leclaire, Donatas Gesevicius, Surendra Babu Anantharaman, Markus Regnat, Philip Horst Caspari, Patrik Schürch, David Reber, Karen Verena Strassel, Sina Abdolhosseinzadeh, Matthias Diethelm, Francis Owusu, Camilla Arietta Vael-Garn, Yeerlan Adeli, Wei-Hsu Hu, Cansu Zeytun Kara
Jean-Marie Drezet1992-1996: PhD work at Laboratoire de Métallurgie Physique under the supervision of Prof. Michel Rappaz (cf : http://library.epfl.ch/theses/?display=detail&nr=1509) 1997-2000: EMPACT project (European Modelling Programme for Aluminium Casting Technologies) 2001-2004: VIRCAST project (European Virtual Casting) 2005-2006: Study of the sawing process of rolling sheet al. ingots (Alcan Fonds) 2005-2006: WelAIR project (Welding of Airframes, EADS) 2005-2008: study of the electron beam welding of Cu-Cr-Zr alloys (CEA, France) 2006-2008: study of the laser beam welding of Al-Li alloys (EADS, France) 2008-2011: co-supervision with Prof. A. Nussbaumer of the PhD work of C. Acevedo on the influence of residual stresses on the fatigue design of tubular welded joints, http://library.epfl.ch/theses/?nr=5056 2007-2010: co-supervision with Prof. J.-F. Molinari of the PhD work of K. Shahim on the Normal Pressure Hydrocephalus (S. Momjian, HU-Genève et R. Sinkus, ESPCI-Paris), http://library.epfl.ch/theses/?nr=5191 2008-2012: co-supervision with Prof. M. Rappaz of the PhD work of M. Sistaninia on the simulation of solidification cracking using granular models (CCMX-MERU project) 2010-2014: supervision with Prof. M. Rappaz of the PhD work of N. Chobaut on the modelling of stresses during quenching of thick heat treatable aluminium parts (CCMX-MERU project) 2011-2015: supervision with Prof. H. Van Swygenhoven-Moens of the PhD work of P. Schloth on precipitation during quenching of thick heat treatable aluminium parts (CCMX-MERU project) Eva Klok-LermannTeaching & PhD Courses Physical chemistry of polymeric materials MSE-431 The student has a basic understanding of the physical and physicochemical principles which result from the chainlike structure of synthetic macromolecules. The student can predict major characteristics of a polymer from its chemical structure and molecular architecture.
Cécile HébertCécile Hébert was born in France in 1970. She obtained her Ingeneer degree (physics) and her PhD degree (design of a new energy filter for transmission electron microscopy, under the direction of Prof. B. Jouffrey) at the Ecole Centrale in Paris.
As a post doc with Prof. P. Schattschneider, she was working on the calculation of the fine structure of ionisation edges in EELS. As a research assistant at the Vienna University of Technology, she was one of the main participant to the CHIRALTEM project dealing with the measurement of magnetic circular dichroism in the electron microscope.
Li TangEducation and Training Postdoctoral Fellow, Massachusetts Institute of Technology, 2013 - 2016 Ph.D., University of Illinois at Urbana-Champaign, 2007 - 2012 B.S., Peking University, 2003-2007
Corsin BattagliaCorsin Battaglia directs the laboratory Materials for Energy Conversion at Empa, the Swiss Federal Laboratories for Materials Science and Technology, and is Adjunct Professor of Electrical Engineering at ETH Zurich, Department of Information Technology and Electrical Engineering and Adjunct Professor of Materials Science at EPFL, School of Engineering, Institute of Materials. His research focuses on developing new materials and scalable manufacturing processes for next-generation sustainable energy storage,
Harm-Anton KlokExpertise
Polymer design at nanoscaleBiologically-inspired polymers
Mission
Research at the Laboratory of Polymer (LP) focuses on the development of novel advanced polymeric materials with potential applications in optics, electronics or medicine. The philosophy is that precise control over nanoscale structure is an important prerequisite to tailor polymer properties. To this end, a “bottom-up” approach is followed, which starts with designing a new material at the molecular level, in order to be able to pr
