Publications related to Estimates for the stiffness, strength and drift capacity of stone masonry walls based on 123 quasi-static cyclic tests reported in the literature

Related publications (28)

Experimental Investigation on Size-Effect of Rubble Stone Masonry Walls Under In-Plane Horizontal Loading: Overview and Preliminary Results

Rubble stone masonry is a common construction typology of historical city centres and vernacular architecture. While past earthquakes have shown that it is one of the most vulnerable masonry construction typologies, there are few experimental campaigns giv ...

2024

Seismic Testing of Adjacent Interacting Masonry Structures – Analysis of a Blind Prediction

Katrin Beyer, Igor Tomic

Masonry aggregates, which emerged as layouts of cities and villages became denser, make up historical centres all over the world. In these aggregates, neighbouring structures may share structural walls that are joined at the interfaces by mortar or interlo ...

Springer2024

Reducing uncertainties in response predictions of earthquake-damaged masonry buildings using data from image-based inspection

Ian Smith, Katrin Beyer, Bryan German Pantoja Rosero, Mathias Christian Haindl Carvallo

Image information about the state of a building after an earthquake, which can be collected without endangering the post-earthquake reconnaissance activities, can be used to reduce uncertainties in response predictions for future seismic events. This paper ...

Springer2024

Model uncertainties in action effects and load bearing capacity calculation in statically indeterminate reinforced concrete structures

Aurelio Muttoni, Alain Nussbaumer, Xhemsi Malja

For the dimensioning and assessment of structures, it is common practice to compare action effects with sectional resistances. Extensive studies have been performed to quantify the model uncertainty on the resistance side. However, for statically indetermi ...

Ernst & Sohn2024

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Xhemsi Malja

Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...

EPFL2024

Quantifying the Unknown: Data-Driven Approaches and Applications in Energy Systems

Paul Scharnhorst

In light of the challenges posed by climate change and the goals of the Paris Agreement, electricity generation is shifting to a more renewable and decentralized pattern, while the operation of systems like buildings is increasingly electrified. This calls ...

EPFL2024

Geometrical digital twins of the as-built microstructure of three-leaf stone masonry walls with laser scanning

Andrea Cabriada Ascencio, Katrin Beyer, Yves Weinand, Julien Gamerro, Savvas Saloustros, Andrea Settimi

Research on irregular stone masonry walls is hampered by the lack of detailed geometrical models of their internal micro-structure, i.e. the shape and size of each stone and its position within the wall. Without such a geometric digital twin of walls teste ...

2023

Reliability analysis and partial safety format calibration considering the characteristics of the resistance of reinforced concrete structures

Qianhui Yu

Every engineering calculation is an approximation of reality, with inevitable uncertainties involved. This fact implies that a reliability verification accounting for the uncertainties is a necessary step in the design and assessment of structures. Nowaday ...

EPFL2023

E-Scan: Consuming Contextual Data with Model Plugins

Anastasia Ailamaki, Viktor Sanca

Extracting value and insights from increasingly heterogeneous data sources involves multiple systems combining and consuming the data. With multi-modal and context-rich data such as strings, text, videos, or images, the problem of standardizing the data mo ...

2023

Data-driven IQC-Based Robust Control Design for Hybrid Micro-disturbance Isolation Platform

Alireza Karimi, Vaibhav Gupta, Elias Sebastian Klauser

A novel approach for robust controller synthesis, which models uncertainty as an elliptical set, is proposed in the paper. Given a set of frequency response functions of linear time-invariant (LTI) multiple-input multiple-output (MIMO) systems, the approac ...

IEEE2023

Deep Q-learning agent for building earthquake resisting wall

Katrin Beyer, Qianqing Wang, Ketson Roberto Maximiano Dos Santos

The construction of dry-joint brick masonry that is subject to seismic loading can be modelled as a strategy problem wherein bricks must be laid to form a load resisting structure. To learn how to mount bricks while considering relevant engineering criteri ...

2022

A virtual microstructure generator for 3D stone masonry walls

Katrin Beyer, Mahmoud S. M. Shaqfa

Detailed micromodel simulations of stone masonry walls require as input a 3D mesh that represents a realistic arrangement of stones in the masonry wall. In this paper, we constructed the first 3D masonry microstructures to derive 2D and 3D finite or discre ...

ELSEVIER2022

Reproducibility dataset for CRYOWRF validation

Michael Lehning, Varun Sharma, Franziska Gerber

This dataset contains data and scripts for "CRYOWRF - a validation and the effect of blowing snow on the Antarctic SMB" (Gerber et al., 2022).* Simulation_setup: Namelists and input information to run the simulation. Some input files need to be downloaded ...

Zenodo2022

Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes

Aurelio Muttoni, Miguel Fernández Ruiz, Qianhui Yu

The increasing usage of nonlinear analyses for the design of reinforced concrete structures and the necessity of codes of practice to provide a consistent safety format for them is one of the challenges that new generations of codes of practice are facing. ...

ELSEVIER SCI LTD2022

Geometrical Treatise on the Modelling of 3D Particulate Inclusion-Matrix Microstructures with an Application to Historical Stone Masonry Walls

Mahmoud S. M. Shaqfa

As historical stone masonry structures are vulnerable and prone to damage in earthquakes, investigating their structural integrity is important to reduce injuries and casualties while preserving their historical value. Stone masonry is a composite material ...

EPFL2022

FEM of stress partition during compression of WC-10 wt.% Co with realistic 3D morphology

Daniele Mari, Lucas Eric Jacques Degeneve

A Finite Element Model is developed to represent the mechanical behavior of WC-10 wt.% Co in compression tests. In this research, realistic three-dimensional model is obtained by slicing a sample by Focused Ion Beam and reconstituting it, resulting in two ...

ELSEVIER SCI LTD2022

Pollution mask for the continuous corrected particle number concentration data in 1 min resolution, measured in the Swiss aerosol container during MOSAiC 2019/2020

Julia Schmale, Andrea Baccarini, Ivo Fabio Beck, Hélène Paule Angot

This dataset contains a pollution flag in 1 min time resolution. It is derived by the pollution detection algorithm (PDA) based on the corrected particle number concentration data (DOI upcoming) measured during the year long MOSAiC expedition from October ...

Zenodo2022

Latest findings on the behaviour factor q for the seismic design of URM buildings

Katrin Beyer

Recent earthquakes as the 2012 Emilia earthquake sequence showed that recently built unreinforced masonry (URM) buildings behaved much better than expected and sustained, despite the maximum PGA values ranged between 0.20-0.30 g, either minor damage or str ...

SPRINGER2022

Uncertainties in the Seismic Assessment of Historical Masonry Buildings

Katrin Beyer, Igor Tomic, Francesco Vanin

Seismic assessments of historical masonry buildings are affected by several sources of epistemic uncertainty. These are mainly the material and the modelling parameters and the displacement capacity of the elements. Additional sources of uncertainty lie in ...

2021

Cyclic thermomechanical behaviour of pile-soil interface and design methods for energy pile foundations

Elena Ravera

Energy piles are shallow geothermal systems integrated into structures already required for structural functions of civil works that provide both geothermal energy supply and structural support to the built environments. This research work is driven by the ...

EPFL2021