Publications related to A New 1,3,4-Oxadiazole-Based Hole-Transport Material for Efficient CH3NH3PbBr3 Perovskite Solar Cells

Related publications (31)

Durable Perovskite Solar Cells with 24.5% Average Efficiency: The Role of Rigid Conjugated Core in Molecular Semiconductors

Michael Graetzel, Shaik Mohammed Zakeeruddin, Peng Wang, Felix Thomas Eickemeyer

Efficient and robust n-i-p perovskite solar cells necessitate superior organic hole-transport materials with both mechanical and electronic prowess. Deciphering the structure-property relationship of these materials is crucial for practical perovskite sola ...

Wiley-V C H Verlag Gmbh2024

Tailor-made Piezoelectric Elastomer Materials

Francis Owusu

Recent advancements in miniature devices with higher computational capabilities and ultralow power consumption have accelerated the development of wearable sensors, actuators, and energy harvesters everywhere. The ultimate aim of such a technological revol ...

EPFL2023

Melting pseudosymmetry and thermal expansion in 3-benzoylpropionic acid

Tomasz Poreba

The thermal behavior of 3-benzoylpropionic acid (BPA) was investigated using single-crystal and synchrotron powder X-diffraction, as well as differential scanning calorimetry analysis. The study revealed the existence of two subtly distinct structures of B ...

ROYAL SOC CHEMISTRY2023

Characterisation and hydration kinetics of beta-C2S synthesised with K2SO4 as dopant

Karen Scrivener, Franco Alberto Zunino Sommariva

In this study, a protocol for synthesising beta-C2S using K2SO4 as a dopant has been reported. Quantitative X-Ray diffraction was used to characterise synthesised samples. It was observed that it is possible to synthesise beta-C2S with high purity (>96 wt% ...

Pergamon-Elsevier Science Ltd2023

Incorporation of Lignin in Bio-Based Resins for Potential Application in Fiber-Polymer Composites

Mateus De Assunção Hofmann

Bio-based resins, obtained from renewable raw materials, are a more sustainable alternative to oil-based resins for fiber-reinforced polymer (FRP) composites. The incorporation of lignin in those resins has the potential to enhance their performance. This ...

MDPI2023

Nanocrystalline Flash Annealed Nickel Oxide for Large Area Perovskite Solar Cells

Michael Graetzel, Felix Thomas Eickemeyer, Jovana Milic

The industrialization of perovskite solar cells requires adequate materials and processes to make them economically viable and environmentally sustainable. Despite promising results in terms of power conversion efficiency and operational stability, several ...

WILEY2023

Role of Ionic Liquids in Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Bin Ding, Yong Ding, Xianfu Zhang

Although the power conversion efficiency of perovskite solar cells (PSCs) has reached 25.7%, there is still great potential for improvement in their performance and stability. In the past few years, ionic liquids (ILs) have been extensively investigated an ...

WILEY-V C H VERLAG GMBH2023

Interface connection of functionalized carbon nanotubes for efficient and stable perovskite solar cells

Mohammad Khaja Nazeeruddin, Jianxing Xia

The ionic defects of hetero-junction interfaces always attract and trap carriers via surface electrostatic forces, which are crucial for the efficiency and intrinsic stability of perovskite solar cells (PSCs). Herein, functionalized carbon nanotubes (CNTs) ...

Royal Society of Chemistry2023

Visualizing Interfacial Energy Offset and Defects in Efficient 2D/3D Heterojunction Perovskite Solar Cells and Modules

Mohammad Khaja Nazeeruddin, Paul Joseph Dyson, Bin Ding, Yong Ding

Currently, the full potential of perovskite solar cells (PSCs) is limited by chargecarrier recombination owing to imperfect passivation methods. Here, the recombination loss mechanisms owing to the interfacial energy offset and defects are quantified. The ...

Wiley-V C H Verlag Gmbh2023

Photoelectrochemical Cell Engineering for Solar Energy Conversion

Dan Zhang

Solar energy is the most abundant energy source, harnessing solar energy holds the solution to the challenge of increasing global energy demand and reducing our dependence on fossil fuels. Photovoltaics which directly convert solar energy into electricity ...

EPFL2023

Effect of chromium content on microstructural evolution of CoNiAlW superalloy

Cyril Cayron

Effects of chromium (Cr) content on types and morphologies of various phases of a newly developed Co-Ni-Al-W superalloy (Co-30Ni-6W-9Al-3Ti-1Ta) have been investigated in this study. Microstructural examinations were carried out by field-emission scanning ...

SPRINGER HEIDELBERG2022

Characterization of water sorption cycle in the cement microstructure of controlled oxide composition

Monisha Rastogi

This thesis investigates the water vapour sorption behaviour of samples with maximized calcium-silicate-hydrate (C-S-H) content. Primarily, the role of heterogeneous and homogeneous cavitation has been studied during the drying of cementitious materials. C ...

EPFL2022

Modulating the Electron Transporting Properties of Subphthalocyanines for Inverted Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Hiroyuki Kanda, Maria Cristina Momblona Rincón

The lack of organic non-fullerene ETMs with good electron transport and device stability is an important problem for the further development and commercialization of perovskite solar cells. Herein, the use of SubPcs as ETMs in PSCs is explored. To this end ...

FRONTIERS MEDIA SA2022

Second harmonic scattering of water in a biological context

Tereza Schönfeldová

Water is one of the most abundant molecules in the universe. It forms a hydrogen bond network with unique structure and dynamics. Hydrogen bonding is highly relevant to many biological processes including membrane formation, protein folding, adsorption, an ...

EPFL2022

Composition and Interface Engineering of High Performing Perovskite Solar Cells

Mousa Abdulla M E Abuhelaiqa

Perovskite solar cells have been established as a disruptive technology in the domain of photo-voltaics. Their facile, low-temperature processing and high-power conversion efficiency make them stand-out among other mature solar technologies. The performanc ...

EPFL2022

Photonic nanostructures mimicking floral epidermis for perovskite solar cells

Mohammad Khaja Nazeeruddin, Hobeom Kim

Here, we report photonic nanostructures replicated from the adaxial epidermis of flower petals onto light-polymerized coatings using low-cost nanoimprint lithography at ambient temperature. These multifunctional nanocoatings are applied to confer enhanced ...

ELSEVIER2022

Coupled segregation mechanisms of Sc, Zr and Mn at theta ' interfaces enhances the strength and thermal stability of Al-Cu alloys

Baptiste Thomas Jean Rouxel

The refinement and thermal stability of intermediate theta-prime (theta') precipitates are critical in the development of new high strength 2xxx series aluminium-copper (Al-Cu) alloys for high temperature applications. In this work, we use trace additions ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Promoting Persistent Superionic Conductivity in Sodium Monocarba-closo-dodecaborate NaCB11H12 via Confinement within Nanoporous Silica

Mirjana Dimitrievska

Superionic phases of bulk anhydrous salts based on large cluster-like polyhedral (carba)borate anions are generally stable only well above room temperature, rendering them unsuitable as solid-state electrolytes in energy-storage devices that typically oper ...

AMER CHEMICAL SOC2021

Evaluation of the Effect of Backsheet Properties on PV Encapsulant Degradation under Ultraviolet-Damp-Heat Conditions

Djamel Eddine Mansour

The reliability of photovoltaic (PV) modules is highly determined by the durability of the polymeric components (backsheet and encapsulant). The power degradation and failure of PV modules can be caused by changes in the physical, chemical, and mechanical ...

EPFL2021

Characterization of untransformed ferrite in 10Cr and 12Cr ODS steels

Roland Logé

Two new ferrito-martensitic oxide dispersion strengthened (ODS) steels reinforced with (Y, Ti, O) nanoparticles were elaborated using a high-energy attritor. The milled powder was consolidated by hot extrusion at 1050 degrees C. The two types of ODS steels ...

ELSEVIER SCI LTD2021