Publications related to Influence of load history on the force-displacement response of in-plane loaded unreinforced masonry walls

Related publications (27)

Experimental Investigation on Size-Effect of Rubble Stone Masonry Walls Under In-Plane Horizontal Loading: Overview and Preliminary Results

Rubble stone masonry is a common construction typology of historical city centres and vernacular architecture. While past earthquakes have shown that it is one of the most vulnerable masonry construction typologies, there are few experimental campaigns giv ...

2024

Experimental and analytical investigation of shear-reinforced concrete and dowel action

Marko Pejatovic

Codes of practice can be overly conservative, particularly for the shear resistance of reinforced concrete beams with shear reinforcement when large loads act close to supports. This thesis addresses the topic by proposing a refined design approach based o ...

EPFL2024

Experimental investigation of dowel action in reinforcing bars using refined measurements

Aurelio Muttoni, Marko Pejatovic

In typical reinforced concrete design, reinforcement is designed to carry axial forces, but it can also resist transversal forces by dowel action. This is usually neglected for simplicity's sake in the design phase, but it can be accounted for either expli ...

Ernst & Sohn2024

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Diego Hernández Fraile

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

EPFL2024

A Softening Constitutive Law and Gradient-Inelastic Fiber-Based Element for 3-Dimensional Frame Simulations Under Seismic Excitations

Diego Isidoro Heredia Rosa

Steel frame structures are essential components of modern infrastructure. Understanding their behavior under seismic loading is critical for ensuring public safety and minimizing damage that occurs during earthquakes. To accurately predict the response of ...

EPFL2024

Energy dissipation in fiber-polymer composites adhesive joints under cyclic loading

Ghazaleh Eslami

Sustainable development has emerged as a paramount consideration in various fields of industry, including construction, to preserve the environment and its finite resources. Lightweight structures, such as fiber-polymer composite structures, address both s ...

EPFL2023

Drained Clay-Pipe Interface Resistance at Low Normal Stresses and Elevated Temperatures

Roba Houhou

Offshore pipelines that transport hydrocarbons under high pressure and high temperature are usually thermally insulated to maintain an elevated temperature and prevent any heat loss to the surroundings. However, the temperatures at the outer-wall of the pi ...

AMER SOC CIVIL ENGINEERS2023

Full Scale Experiments of a Composite Steel Moment Resisting Frame: Behavioral Insights and Implications on Seismic Design

Dimitrios Lignos, Hammad El Jisr

This paper discusses the cyclic performance of a heavily instrumented 2-bay full-scale composite-steel moment resisting frame (CMRF) sub-system from the onset of structural damage up until incipient collapse. The CMRF featured stiffened end plate bolted co ...

EEME2023

Deep Q-learning agent for building earthquake resisting wall

Katrin Beyer, Qianqing Wang, Ketson Roberto Maximiano Dos Santos

The construction of dry-joint brick masonry that is subject to seismic loading can be modelled as a strategy problem wherein bricks must be laid to form a load resisting structure. To learn how to mount bricks while considering relevant engineering criteri ...

2022

Deformation capacity evaluation for flat slab seismic design

Aurelio Muttoni, Lorenzo Martinelli, Andri Setiawan

In flat-slab frames, which are typically designed as secondary seismic structures, the shear failure of the slab around the column (punching failure) is typically the governing failure mode which limits the deformation capacity and can potentially lead to ...

SPRINGER2022

The Role of the Composite Floor System and Framing Action in the Seismic Performance of Composite Steel Moment-Resisting Frames

Hammad El Jisr

With the advent of performance-based earthquake engineering (PBEE), the need for reliable prediction of earthquake-induced collapse of structures is essential. Despite the significant progress that has been made towards this goal, there are several hurdles ...

EPFL2022

Investigating the cracking of plastered stone masonry walls under shear–compression loading

Katrin Beyer, Michele Godio, Amir Rezaie

Cracks are the most important source of information about the damage that occurs to unreinforced masonry piers under seismic actions. To predict the structural state of unreinforced masonry piers after an earthquake, research models have been developed to ...

2021

Shear Response of Wet Weak Carbonate Rock/Grout Interfaces Under Cyclic Loading

Eleni Stavropoulou

The development and construction of offshore wind farms requires the correct estimation of the friction that can be mobilised at the rock/grout interface. In conventional studies, the shear behaviour of a joint is usually investigated with laboratory tests ...

2021

Hysteretic Behaviour of Shear Stud Connectors in Composite Steel Moment‐Resisting Frames

Dimitrios Lignos, Hammad El Jisr

In steel moment resisting frames (MRFs) with composite floor slabs, seismic loads are transmitted from the slab into the beam through shear studs. Shear strength degradation of the studs due to cyclic loading results into the loss of the load transfer mech ...

2021

RC U-shaped walls subjected to in-plane, diagonal, and torsional loading: New experimental findings

Katrin Beyer

Although reinforced concrete U-shaped walls are popular in construction practice internationally, there is a paucity of experimental research investigating the seismic performance of such salient elements. The present paper summarizes an experimental campa ...

2021

Cyclic thermomechanical behaviour of pile-soil interface and design methods for energy pile foundations

Elena Ravera

Energy piles are shallow geothermal systems integrated into structures already required for structural functions of civil works that provide both geothermal energy supply and structural support to the built environments. This research work is driven by the ...

EPFL2021

The influence of transverse reinforcement and yielding of flexural reinforcement on the shear-transfer actions of RC members

Miguel Fernández Ruiz

The assessment of the shear strength of reinforced concrete beams with and without shear reinforcement is investigated in this paper on the basis of the contribution of the various potential shear-transfer actions. To that aim, a comprehensive experimental ...

2021

Benchmark study of undrained triaxial testing of Opalinus Clay shale: Results and implications for robust testing

Lyesse Laloui, Alessio Ferrari, Alberto Minardi

Triaxial testing of argillaceous rocks and shales is significantly more challenging than conventional rock mechanical testing. The challenges are mainly related to the very low permeability of these geomaterials, and their sensitivity to exposure of atmosp ...

ELSEVIER2021

Fatigue examination of reinforced-concrete bridge slabs using acoustic emission and strain monitoring data

Imane Bayane

The examination of bridges under service loading is key for understanding their condition and thus for their sustainable and efficient use. The need to extend the service duration of existing bridges is increasing, and therefore, efficient tools for examin ...

EPFL2021

Shear force redistributions and resistance of slabs and wide beams

Aurelio Muttoni, Miguel Fernández Ruiz, Raffaele Cantone

Redistribution of shear forces in reinforced concrete members without shear reinforcement is a key aspect for the assessment of the shear capacity of wide beams and slabs. Such redistributions are due to the nonlinear response of reinforced concrete (both ...

2021