Publications related to DEMO design activity in Europe: Progress and updates

Related publications (27)

Models implemented in the methodological approach to design the initial STEP first wall contour

Kevin Henricus Annemarie Verhaegh, Davide Galassi, Filippo Bagnato, Dario Vaccaro

The official Spherical Tokamak for Energy Production mission aims to demonstrate the ability to generate net electricity from fusion with the STEP Prototype Power plant. One of the key technological and engineering challenges in fusion power plants is mana ...

Elsevier Science Sa2024

Nonlinear simulation of plasma turbulence using a gyrokinetic moment-based approach

Antoine Cyril David Hoffmann

Plasma turbulence plays a fundamental role in determining the performances of magnetic confinement fusion devices, such as tokamaks. Advances in computer science, combined with the development of efficient physical models, have significantly improved our u ...

EPFL2024

Global fluid simulations of plasma turbulence in stellarators

António João Caeiro Heitor Coelho

In order to cope with the decarbonization challenge faced by many countries, fusion is one of the few alternatives to fossil fuels for the production of electricity. Two devices invented in the middle of the previous century have emerged as the most promis ...

EPFL2024

Present design of the Steering Mirror Assembly (SMA) for ITER ECHUL

Timothy Goodman, René Chavan, Anastasia Xydou

In the ITER Tokamak, four Electron Cyclotron Heating Upper Launchers (ECHUL) are needed to control plasma instabilities at the rational surfaces, most importantly the q = 3/2 and q = 2/1 neoclassical tearing modes (NTMs). Each ECHUL is equipped with a set ...

2023

Leveraging the Snap Buckling of Bistable Magnetic Shells to Design a Refreshable Braille Dot

Pedro Miguel Nunes Pereira de Almeida Reis, Tian Chen, Arefeh Abbasi, Bastien Freddy Gustave Aymon

A design concept is proposed for the building block, a dot, of programmable braille readers utilizing bistable shell buckling, magnetic actuation, and pneumatic loading. The design process is guided by Finite Element simulations, which are initially valida ...

Wiley2023

Vertical electron cyclotron emission diagnostic on the tokamak à configuration variable

Ambrogio Fasoli, Stefano Coda, Laurie Porte

In this paper, a diagnostic for the measurement of the electron cyclotron emission (ECE) from non-thermal electrons in magnetically confined fusion plasmas is presented. The diagnostic employs a vertical viewing line of sight that allows us to directly inf ...

2023

Essay: Overcoming the Obstacles to a Magnetic Fusion Power Plant

Ambrogio Fasoli

Fusion occurs when light nuclei combine to form heavier nuclei. The energy released in this process powers the stars and can provide humankind with a safe, sustainable, and clean source of baseload electricity, a valuable tool in the fight against climate ...

AMER PHYSICAL SOC2023

Excitation of toroidal Alfvén eigenmodes with counter-current NBI in the TCV tokamak

Laurie Porte, Alexander Karpushov, Matteo Vallar, Samuele Mazzi

In TCV, unstable modes excited by resonant interaction between the shear Alfvèn waves in con- tinuum gaps and energetic particles have been observed in scenarios with Neutral Beam Injection (NBI). TCV is a middle-size device (R 0 /a = 0.88/0.25) equipped w ...

IOP Publishing Ltd2023

A Theory of Value for Service Ecosystems

Blagovesta Hristova Kostova

In this thesis, we present a theory of value for the design and analysis of service ecosystems. The theory is based on general systems thinking. The concept of a system is used for relating knowledge from different disciplines (such as software engineering ...

EPFL2022

Impact of the plasma operation on the technical requirements in EU-DEMO

Olivier Sauter, Minh Quang Tran, Emiliano Fable, Simon Van Mulders

The plasma design point during stationary phase operation of EU-DEMO has been described extensively in the past, and the assumptions employed for its definition have been supported by various investigations. However, a stationary snapshot is by far not suf ...

2022

Integration concept of an Electron Cyclotron System in DEMO

Minh Quang Tran, René Chavan

The pre-conceptual layout for an electron cyclotron system (ECS) in DEMO is described. The present DEMO ECS considers only equatorial ports for both plasma heating and neoclassical tearing mode (NTM) control. This differs from ITER, where four launchers in ...

2021

Design Approaches for Creating Person-Centered, Context Sensitive, and Sustainable Assistive Technology with the Global South

Klaus Benedikt Schönenberger, Mario Andres Chavarria Varon

The implementation of non-user-centered design is sometimes effective for traditionally mass-produced items; however, these methods do not take into account local needs, resources, and cultures, and the history of individual people and communities in low- ...

Oxford University Press2021

Analysis of the effects of thermal anchors on the reduction of the parasitic load to the EU-DEMO TF coils

Kamil Sedlák

The design of the superconducting magnet system of the EU-DEMO tokamak reached the end of the preconceptual design phase, and a careful investigation of the parasitic heat load from the room-temperature environment is needed. A possible route for the paras ...

2021

The effects of the tip clearance on the performance of small-scale turbopumps for ORC applications; analysis and modeling

Jürg Alexander Schiffmann, Sajjad Zakeralhoseini

In this paper, the influence of tip clearance on the performance of small-scale turbopumps is studied numerically on extensive parameter ranges suitable for organic Rankine cycle applications. A novel and fully parameterized design model is developed and u ...

Technical University of Munich2021

Updates on Magnet Design For EU-DEMO Reactor: Optimization Studies on TF and CS Systems

Kamil Sedlák

In the framework of EU design activities for dimensioning the future fusion DEMOnstration reactor (DEMO), extensive analyses were conducted in EUROfusion context, aiming at ultimately defining the design of the DEMO magnets system. In this objective CEA (C ...

IEEE Institute of Electrical and Electronics Engineers2021

Model-based optimization of magnetic control in the TCV tokamak: design and experiments

Federico Pesamosca

Thermonuclear controlled fusion is a promising answer to the current energy and climate issues, providing a safe carbon-free source of energy which is virtually inexhaustible. In magnetic confinement thermonuclear fusion based on tokamak reactors, hydrogen ...

EPFL2021

Real-time feedback control system for ADITYA-U horizontal plasma position stabilisation

Harshita Raj

The ADITYA-U tokamak (R-0 = 0.75 m, a = 0.25 m) is designed to shape plasma column in both single and double null diverter configurations. It is quite well known that sustaining a shaped plasma in tokamak requires very good plasma column position control, ...

2021

Progress on the Design of the 15 T Magnet of the EDIPO Test Facility

Pierluigi Bruzzone, Kamil Sedlák, Xabier Sarasola Martin, Roberto Guarino, Evgeny Solodko

EDIPO 2 (the upgraded EDIPO test facility) will provide a unique testbed for superconducting cables for fusion magnets,accelerators, and other applications. Compared to the previous magnet assembly, the magnetic field is enhanced from 12.35 T to 15 T, the ...

IEEE Institute of Electrical and Electronics Engineers2021

Design and Characterization of the Interlayer Joint Between Low-Field Nb3Sn Conductors of a Layer Wound DEMO TF Coil

Pierluigi Bruzzone, Boris Stepanov, Kamil Sedlák, Mithlesh Kumar

In the frame of the conceptual design studies for the Toroidal Field (TF) coils of DEMO, a solution based on a layer-wound magnet, rectangular-shaped Cable-in-Conduit conductors and W&R manufacturing approach, is being developed. The feasibility and perfor ...

IEEE Institute of Electrical and Electronics Engineers2021

CEA Broad Studies on EU DEMO CS and PF Magnet Systems

Kamil Sedlák

In the framework of EU design activities for dimensioning the future fusion DEMOnstration reactor (DEMO), extensive analyses were conducted in EUROfusion context, aiming at ultimately defining the design of the DEMO magnet system. In this objective CEA pro ...

IEEE Institute of Electrical and Electronics Engineers2020