Publications related to Analysis of Slip Energy Recovery Drives Behavior Using the Compex Torque Coefficient Method

Related publications (29)

Pseudo-Three-Dimensional Analytical Model of Linear Induction Motors for High-Speed Applications

Mario Paolone, André Hodder, Simone Rametti, Lucien André Félicien Pierrejean

Literature on linear induction motors (LIMs) has proposed several approaches to model the behavior of such devices for different applications. In terms of accuracy and fidelity, field analysis-based models are the most relevant. Closed-form or numerical so ...

2024

Analytical Model of Single-Sided Linear Induction Motors for High-Speed Applications

Mario Paolone, André Hodder, Simone Rametti, Lucien André Félicien Pierrejean

This article describes a field-based analytical model of single-sided linear induction motors (SLIMs) that explicitly considers the following effects altogether: finite motor length, magnetomotive force mmf space harmonics, slot effect, edge effect, and ta ...

IEEE2024

A cut-cell method for the numerical simulation of 3D multiphase flows with strong interfacial effects

Marco Picasso, Alexandre Caboussat, Alexandre Masserey, Julien Hess

We present a numerical model for the approximation of multiphase flows with free surfaces and strong interfacial effects. The model relies on the multiphase incompressible Navier-Stokes equations, and includes surface tension effects on the interfaces betw ...

Academic Press Inc Elsevier Science2024

Adaptive Finite Elements with Large Aspect Ratio. Application to Aluminium Electrolysis

Paride Passelli

The goal of this work is to use anisotropic adaptive finite elements for the numerical simulation of aluminium electrolysis. The anisotropic adaptive criteria are based on a posteriori error estimates derived for simplified problems. First, we consider an ...

EPFL2024

Non-contact robotic manipulation of floating objects: exploiting emergent limit cycles

Josephine Anna Eleanor Hughes, Nana Obayashi

The study of non-contact manipulation in water, and the ability to robotically control floating objects has gained recent attention due to wide-ranging potential applications, including the analysis of plastic pollution in the oceans and the optimization o ...

Frontiers Media Sa2023

Exploring the effectiveness of using internal CNC system signals for chatter detection in milling process

Dimitrios Kyritsis, Xiaochen Zheng

Chatter is a harmful self-excited vibration that commonly occurs during milling processes. Data -driven chatter detection and prediction is critical to achieve high surface quality and process efficiency. Most existing chatter detection approaches are base ...

ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD2023

Rock-Flow Cell Parameters Evaluation Using Ultrasound Doppler Velocimetry

Giovanni De Cesare

This work presents a study of two-phase flow generated inside a rock-flow cell setup. It is characterized by a pipe section filled with fluid (oil in our studies) that is put into oscillation around its mass centre by an electric motor. This type of appara ...

2023

Increasing the Energy Efficiency of Gas Boosters for Hydrogen Storage and for Refueling Stations

Alfred Rufer

A new electrically driven gas booster is described as an alternative to the classical air-driven gas boosters known for their poor energetic efficiency. These boosters are used in small scale Hydrogen storage facilities and in refueling stations for Hydrog ...

MDPI2023

Revisiting the role of friction coefficients in granular collapses: confrontation of 3-D non-smooth simulations with experiments

Gauthier Paul Daniel Marie Rousseau

In this paper, transient granular flows are examined both numerically and experimentally. Simulations are performed using the continuous three-dimensional (3-D) granular model introduced in Daviet & Bertails-Descoubes (ACM Trans. Graph., vol. 35, no. 4, 20 ...

Cambridge University Press2023

Numerical Study of the Optical Response of ITO-In2O3 Core-Shell Nanocrystals for Multispectral Electromagnetic Shielding

Michele Ghini

Nowadays materials to protect equipment from unwanted multispectral electromagnetic waves are needed in a broad range of applications including electronics, medical, military and aerospace. However, the shielding materials currently in use are bulky and wo ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Modelling and Sensors for Magnetically-Levitated Disc Drives

Juan Patricio Tomás Peralta Fierro

The development of new industrial applications has diverted the focus of research towards compacter and faster rotatory drives. These requirements push the classical ball-bearings of electric motors to the limits in terms of operational lifetime and fricti ...

EPFL2022

Modelling of AC/DC Interactions of Converter-Interfaced Resources for Harmonic Power-Flow Studies in Microgrids

Mario Paolone, Andreas Martin Kettner, Yihui Zuo, Johanna Kristin Maria Becker

Modern power distribution systems experience a large-scale integration of Converter-Interfaced Distributed Energy Resources (CIDERs). As acknowledged by recent literature, the interaction of individual CIDER components and different CIDERs through the grid ...

2022

Control-oriented modeling and analysis of tubular dielectric elastomer actuators dedicated to cardiac assist devices

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Armando Matthieu Walter, Ning Liu

This paper deals with the control-oriented modeling of a multilayered dielectric elastomer actuator based tube. The actuator is clamped at both sides and performs a radial displacement. The hyperelastic deformation and the viscoelastic performance, togethe ...

2022

A new Euler-Lagrangian cavitation model for tip-vortex cavitation with the effect of non-condensable gas

Mohamed Farhat

Numerical simulation of tip vortex cavitation (TVC) remains a challenging task in a variety of applica-tions, such as axial turbines and pumps as well as marine propellers. Although it is well known that TVC is highly sensitive to gas content, be it dissol ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Whole Body Model Predictive Control with a Memory of Motion: Experiments on a Torque-Controlled Talos

Sylvain Calinon, Teguh Santoso Lembono

This paper presents the first successful experiment implementing whole-body model predictive control with state feedback on a torque-control humanoid robot. We demonstrate that our control scheme is able to do whole-body target tracking, control the balanc ...

IEEE2021

Medium Voltage Impedance and Admittance Measurement and System Identification Techniques

Marko Petkovic

The recent trend of an increasing share of renewable energy sources in modern power systems, as well as the integration of power electronics equipment, is shaping the requirements for stable grid infrastructure. These requirements mainly come from the stab ...

EPFL2021

Low Noise Clock Generation: Modeling, Analysis and Implementation

Duygu Kostak

The aim of this thesis is to implement, analyze and improve the selected low noise clock generation and distribution techniques for ADC implementations. The thesis is divided into two parts. The first part focuses on the sampling phase generation and distr ...

EPFL2021

Small scale very high speed slotless permanent magnet motors

Guillaume Paul-André Burnand

This research work has been triggered by an industrial project aimed at modelling and manufacturing a small-scale very high speed motor. Very high speed electrical motors offer the main advantage of reducing the size of a system. Indeed, at constant output ...

EPFL2020

A convex model for induction motor starting transients imbedded in an OPF-based optimization problem

Sidi-Rachid Cherkaoui, Hossein Sekhavatmanesh

Large horsepower induction motors play a critical role in the operation of industrial facilities. In this respect, the distribution network operators dedicate a high priority to the operational safety of these motor loads. In this paper, the induction moto ...

Elsevier2020

Optimal Load Restoration in Active Distribution Networks Complying With Starting Transients of Induction Motors

Sidi-Rachid Cherkaoui, Hossein Sekhavatmanesh

Large horsepower induction motors play a critical role as industrial drives in production facilities. The operational safety of distribution networks during the starting transients of these motor loads is a critical concern for the operators. In this paper ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2020