Publications related to Effect of base bitumen composition on asphalt rubber binder properties

Related publications (20)

An advanced methodology for the mix design optimization of hot mix asphalt

The bitumen quantity to add to asphalt mixtures depends on the surfaces of aggregates and filler to be coated. The formulas currently available in the literature have limitations such as considering all the fillers with the same specific surface or the agg ...

Elsevier Sci Ltd2016

Advanced methodology for optimization of mixture design of asphalt concrete containing reclaimed asphalt pavement material

Sara Bressi

Despite the massive use of Reclaimed Asphalt Pavement (RAP) in Hot Mix Asphalt (HMA) production, the chemo-physical phenomena that characterise the fabrication of these mixtures have not yet been completely explored. The detection and understanding of thes ...

EPFL2016

A new laboratory methodology for optimization of mixture design of asphalt concrete containing reclaimed asphalt pavement material

André-Gilles Dumont, Sara Bressi

The reduction of virgin bitumen added to asphalt mixtures containing Reclaimed Asphalt Pavement (RAP) is based on the typical assumption that all the aged binder function in the same way as the virgin binder. However, recent studies conducted by the author ...

Springer Verlag2016

A framework for characterizing RAP clustering in asphalt concrete mixtures

André-Gilles Dumont, Sara Bressi, Michel Pittet

Recycled Asphalt Pavement (RAP) is commonly used in asphalt for road rehabilitation or new constructions. Nevertheless, some physical and chemical phenomena that occur during production, laying and compaction of mixtures containing RAP are not yet complete ...

Elsevier Sci Ltd2016

Asphalt Mixture with RAP: Mix Design Optimization

André-Gilles Dumont, Nicolas Bueche, Sara Bressi, Michel Pittet

The addition of reclaimed asphalt pavement (RAP) in hot mix asphalt is now common practice in Switzerland. With the increases of RAP content in asphalt mixture, the problematic of the mix design optimization becomes an important issue to be considered. The ...

Springer2016

Particle clustering phenomena in hot asphalt mixtures with high content of reclaimed asphalt pavements

André-Gilles Dumont, Sara Bressi

One challenge in efficient recycling of asphalt concrete is the adherence of the reclaimed asphalt pavement (RAP) particles or clustering that inhibits fulfilling the aggregate gradation requirements. In order to investigate this phenomenon two types of mi ...

Elsevier Sci Ltd2015

Decision aid model for asphalt mixture choice

André-Gilles Dumont, Nicolas Bueche

Warm Mix Asphalt (WMA) represents widely used alternative to hot mix asphalt (HMA), this in order to decrease the energy consumption and environmental load. Numerous WMA products can be found and the choice of the most favourable mixture is not necessarily ...

2014

Shear Thickening Fluid Impregnated Foam Composites for Vibration Control and Impact Protection

Mathieu Soutrenon

Highly concentrated suspensions of silica particles present shear thickening properties, shifting from a low to a high viscosity state, instantly and reversibly at a critical shear rate. Their viscosity increases by up to 3 orders of magnitude, changing fr ...

EPFL2013

Asphalt mixture choice: a decision-aid model

Nicolas Bueche

Due to the continuous development of warm mix asphalts (WMA) as alternatives to hot mix asphalts (HMA), the choice of the most favourable mixture for a given project is not necessarily straightforward. When considering greenhouse gas (GHG) emissions and en ...

2012

Composition and fate of gas and oil released to the water column during the Deepwater Horizon oil spill

Jeremy Samuel Arey

Quantitative information regarding the endmember composition of the gas and oil that flowed from the Macondo well during the Deepwater Horizon oil spill is essential for determining the oil flow rate, total oil volume released, and trajectories and fates o ...

Natl Acad Sciences2012

Évaluation des performances et des impacts des enrobés bitumineux tièdes

Nicolas Bueche

By decreasing the mixing and laying temperatures, warm mix asphalts (WMA) allow a reduction of the energy consumption as well as the emissions, thus contributing to the sustainable development. However researches are necessary for these asphalt mixtures to ...

EPFL2011

Metallocene Catalyzed Polyolefins For Improving Thermal And Mechanical Properties Of Bitumen Blends

Jan-Anders Edvin Maansson, John Christopher Plummer, Chiara Spadaro

Bitumen is a complex viscoelastic material used as a binder in applications ranging from road paving to waterproof membranes for roofing [1]. In such applications, bitumen is often blended with a polymer in order to improve its elasticity. The resulting po ...

2010

Thermomechanical characterisation of asphalt pavements in laboratory conditions

André-Gilles Dumont

Due to the viscoelastic properties of bituminous concrete, temperature changes result in significant mechanical effects. This paper proposes a method to assess, first, the intrinsic thermophysical parameters (thermal conductivity and heat capacity) of a bi ...

2010

Warm asphalt bituminous mixtures with regards to energy, emissions and performance

Nicolas Bueche

With the current concerns about sustainable development and greenhouse gas emissions in various fields, the road domain has also to contribute. Indeed, asphalt mixture production is a very important energy consuming phase in order to heat the aggregates an ...

2009

Adaptive composite structures for tailored human-materials interaction

Christian Fischer

Controlling the static and dynamic properties of sports equipment has since long been of great concern in the sports engineering industry. More recently there has been interest in better understanding and improving the interplay between such properties and ...

EPFL2007

Modeling of rutting in asphalt flexible pavement

André-Gilles Dumont

This paper presents a finite element analysis modeling of rutting. The behaviors of the asphalt concrete is described using an elasto-viscoplastic constitutive relation, while an elastoplastic constitutive relation is used for the lower layers. The model a ...

2007

Assessment of the rheological properties of asphalt rubber binder and its residual phases

André-Gilles Dumont, Mehdi Ould Henia

The asphalt rubber blends design is an empirical procedure and is quite sensitive to the variability of the components properties. A better understanding of the physical phenomenon involved during the curing process is a prerequisite step to propose a rati ...

2006

New Method for Pavement Rutting Prediction

André-Gilles Dumont, Mehdi Ould Henia

In recent years, pavement rutting rate has increased significantly due to constant traffic intensity increment. These solicitations affect the bituminous layers that can quickly attain their permanent deformation limit resistance. This phenomenon can lead ...

ISAP2006

Modélisation et prédiction du comportement rhéologique des mélanges bitume caoutchouc

Mehdi Ould Henia

Asphalt rubber is a modified binder widely used in pavement construction. Composition design methods of asphalt rubber blends are exclusively empiric and rely on the selection of the optimal combination of parameters after a long experimental program. The ...

EPFL2005

Experiments investigating the effects of fluid elasticity on laminar vortex shedding from a cylinder

Christopher Pipe

Experiments on vortex shedding from a cylinder placed in uniform flows of low concentration polymer solutions are reported for Reynolds numbers from 50 to 150. The fluids used were aqueous solutions of polyethylene oxide (PEO) and rheological characterizat ...

EPFL2005