Publications related to Gold nano-mesh synthesis by continuous-flow X-ray irradiation

Related publications (30)

Characterization of a flexible a-Si:H detector for in vivo dosimetry in therapeutic x-ray beams

Nicolas Würsch, Jonathan Emanuel Thomet, Luca Massimiliano Antognini, Sylvain Dunand

BackgroundThe increasing use of complex and high dose-rate treatments in radiation therapy necessitates advanced detectors to provide accurate dosimetry. Rather than relying on pre-treatment quality assurance (QA) measurements alone, many countries are now ...

Wiley2024

Modulation of the nanoscale motion rate of Candida albicans by X-rays

Sandor Kasas, María Inés Villalba

IntroductionPatients undergoing cancer treatment by radiation therapy commonly develop Candida albicans infections (candidiasis). Such infections are generally treated by antifungals that unfortunately also induce numerous secondary effects in the patient. ...

Frontiers Media SA2023

Hydrogenated amorphous silicon high flux x-ray detectors for synchrotron microbeam radiation therapy

Nicolas Würsch, Sylvain Dunand

Objective. Microbeam radiation therapy (MRT) is an alternative emerging radiotherapy treatment modality which has demonstrated effective radioresistant tumour control while sparing surrounding healthy tissue in preclinical trials. This apparent selectivity ...

IOP Publishing Ltd2023

Additive and digital manufacturing of transient sensors and bioelectronics

Nicolas Francis Fumeaux

Transient electronics have emerged as a promising class of devices, capable of breaking down without harmful side effects to their environment. They have tremendous potential as bioresorbable electronics for temporary applications in the human body, and as ...

EPFL2023

Optical manipulation of plasmonic nanoparticles: Applications in surface chemistry and nano-optics

Jeonghyeon Kim

Optical tweezers are devices that can manipulate nano- and microparticles using a laser. The principle of optical tweezers is to apply a force to an object using the momentum of light. This force is very small, but it is sufficient to move things in the mi ...

EPFL2023

Print-Light-Synthesis of Gold Thin Film Electrodes for Electrochemical Sensing

Andreas Stephan Lesch, Horst Pick

The one-step fabrication of gold films by inkjet printing of a gold precursor ink and its photochemical reduction by exposure to UV light is presented. Inkjet printing creates on a substrate with high control micrometer-thin reaction volumes in which upon ...

Wiley2023

Influence of Fin and Finger Number on TID Degradation of 16-nm Bulk FinFETs Irradiated to Ultrahigh Doses

Christian Enz

This article investigates the fin- and finger-number dependence of the total ionizing dose (TID) degradation in 16-nm bulk Si FinFETs at ultrahigh doses. n- and p-FinFETs designed with different numbers of fins and fingers are irradiated up to 500 Mrad(SiO ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Scalable fabrication of functional nanostructures on stretchable substrates by capillary-assisted particle assembly and adhesion lithography

Henry Shao-Chi Yu

The fabrication of metallic nanostructures on stretchable substrates enables specific applications that exploit the combination of the nano-scale phenomena and the mechanical tunability of the physical dimensions of the nanostructures. Due to the large dif ...

EPFL2022

Preparation and Analysis of Bacteria Surface-Modified with Polymer Nanoparticles

Lisa Patricia Elisabeth Bader

Cell-based drug carriers present an interesting approach to improve the targeted delivery of therapeutic drugs in vivo. Specifically, bacterial cells possess interesting properties such as motility and sensing that allow some strains to selectively target ...

EPFL2022

A new versatile hybrid MEMS technology for high sensitivity, fluid proof sensing applications

Matthias Neuenschwander

The field of micro electromechanical systems (MEMS) evolved from the microelectronic industry and the technologies developed to fabricate integrated circuits. As a result, MEMS are commonly fabricated on silicon wafers. The development of MEMS has been dri ...

EPFL2022

Electronic transport in graphene nanoribbon junctions

Kristians Cernevics

Graphene nanoribbons (GNRs) - one-dimensional strips of graphene - share many of the exciting properties of graphene, such as ballistic transport over micron dimensions, strength and flexibility, but more importantly, they exhibit a tunable band gap that d ...

EPFL2022

Plasmon-induced near-infrared fluorescence enhancement of single-walled carbon nanotubes

Giulia Tagliabue, Ardemis Anoush Boghossian, Shang-Jung Wu, Alessandra Antonucci, Theodoros Tsoulos, Amirmostafa Amirjani, Sayyed Hashem Sajjadi

Single-walled carbon nanotubes (SWCNTs) emit near-infrared (NIR) fluorescence that is ideal for optical sensing. However, the low quantum yields diminish the sensor’s signal-to-noise ratio and limits the penetration depths for in vivo measurements. In this ...

2022

Low and high frequency electromagnetic forces: numerical modelling and practical applications

Marco Riccardi

The understanding and manipulation of nanoscale analytes is a central theme in nanotechnology and has been one of the main driving forces behind the development of this field as we know it today. Furthermore, such a technology has the potential to also rev ...

EPFL2022

TID Degradation Mechanisms in 16-nm Bulk FinFETs Irradiated to Ultrahigh Doses

Christian Enz

This article investigates the total ionizing dose (TID) degradation mechanisms of 16-nm bulk Si FinFETs at ultrahigh doses. n- and p-FinFETs with several channel lengths are irradiated up to 1 Grad(SiO2) and then annealed for 24 h at 100 degrees C. Irradia ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Doping challenges and pathways to industrial scalability of III–V nanowire arrays

Anna Fontcuberta i Morral, Wonjong Kim, Lucas Güniat, Valerio Piazza

Semiconductor nanowires (NWs) have been investigated for decades, but their application into commercial products is still difficult to achieve, with triggering causes related to the fabrication cost and structure complexity. Dopant control at the nanoscale ...

2021

Hydrogenation of a Benzene-Toluene Mixture Using Metal Nanoparticles Stabilized by a Hyper-Crosslinked Aromatic Polymer

Lioubov Kiwi

Hydrogenation of aromatic compounds is a widely used catalytic process in modern industry. Selective hydrogenation of benzene (BZ)-toluene (TL) mixtures is an important industrial process as it allows the purification of BZ for further synthetic purposes. ...

WILEY-V C H VERLAG GMBH2021

Discrete metal nanoparticles with plasmonic chirality

Jijun He

From a geometrical perspective, a chiral object does not have mirror planes or inversion symmetry. It exhibits the same physical properties as its mirror image (enantiomer), except for the chiroptical activity, which is often the opposite. Recent advanceme ...

Royal Society of Chemistry2021

On the Electronic and Optical Properties of Metal-Organic Frameworks: Case Study of MIL-125 and MIL-125-NH2

Berend Smit, Alfredo Pasquarello, Kyriakos Stylianou, Francesco Ambrosio, Gloria Capano, Stavroula Kampouri

The photo-active MIL-125 and MIL-125-NH2 metal-organic frameworks (MOFs), despite having a very similar crystalline structure, exhibit different optical behaviors. Luminescence in MIL-125 decays in about 1 ns, while for its amino counterpart, the lifetime ...

2020

Born to be different: the formation process of Cu nanoparticles tunes the size trend of the activity for CO2 to CH4 conversion

Kevin Rossi, Elena Gazzarrini

We investigate the impact of the formation process of Cu nanoparticles on the distribution of adsorption sites and hence on their activity. Using molecular dynamics, we model formation pathways characteristic of physical synthesis routes as the annealing o ...

ROYAL SOC CHEMISTRY2021

Challenges and Applications to Operando and In Situ TEM Imaging and Spectroscopic Capabilities in a Cryogenic Temperature Range

Vasiliki Tileli, Reinis Ignatans

In this Account, we describe the challenges and promising applications of transmission electron microscopy (TEM) imaging and spectroscopy at cryogenic temperatures. Our work focuses on two areas of application: the delay of electron-beam-induced degradatio ...

American Chemical Society2021