Publications related to Fracture toughness of TiAl alloys: A comparison of two gamma-a2 structures

Related publications (25)

An adaptive phase field approach to 3D internal crack growth in rocks

Tao Xu, Michael Heap, Alexandra Roma Larisa Kushnir

Modeling the 3D internal crack under compression entails complex fracture mechanics (mode I-II-III fracture), resulting in substantial computational costs and challenges in characterizing fracture morphology characterization for Phase Field Method (PFM) si ...

2024

Two-dimensional quasi-static delamination in composite laminates under Mode-I and Mode-II conditions

Congzhe Wang

Fiber-polymer composites consist of a polymer matrix and reinforcing fibers made of various materials. These composites exhibit exceptional properties, such as a high strength-to-weight ratio and excellent corrosion resistance, which has led to their incre ...

EPFL2024

Water weakening and the compressive brittle strength of carbonates: Influence of fracture toughness and static friction

Marie Estelle Solange Violay, Corentin Jean-Marie Rémi Noël, Barnaby Padraig Fryer

Water is ubiquitous within the pore space of rocks and has been shown to affect their physical and mechanical behaviour. Indeed, water can act on the rock strength via mechanical (i.e., reducing the effective stresses) or chemical effects (e.g., mineral di ...

2024

Propagation of planar three-dimensional buoyant hydraulic fractures

Andreas Möri

Hydraulic fractures are driven by an internal fluid pressure exceeding the minimum compressive stress, propagating in a direction perpendicular to the latter. This class of tensile fractures has gained interest over the last fifty years due to the developm ...

EPFL2023

Three-dimensional hydraulic fracture propagation in homogeneous and heterogeneous media

Carlo Peruzzo

Hydraulic fractures are tensile fractures that occur in solid materials due to the natural intrusion or anthropogenic injection of a viscous fluid into a fracture channel. The deliberate creation of hydraulic fractures is part of an industrial technology h ...

EPFL2023

Elongated hydraulic fracture emerging from layers of alternating fracture toughness

Brice Tanguy Alphonse Lecampion, Carlo Peruzzo

Whether used to enhance the hydrocarbon production from low permeability rocks or to measure the minimum in-situ principal stress in rock formations, height growth of a hydraulic fracture above the formation of interest is a key metric for the design of su ...

2023

Three-dimensional buoyant hydraulic fractures: finite volume release

Brice Tanguy Alphonse Lecampion, Andreas Möri

In impermeable media, a hydraulic fracture can continue to expand even without additional fluid injection if its volume exceeds the limiting volume of a hydrostatically loaded radial fracture. This limit depends on the mechanical properties of the surround ...

Cambridge University Press2023

Arrest Mechanisms of Buoyant Hydraulic Fractures

Brice Tanguy Alphonse Lecampion, Carlo Peruzzo, Andreas Möri, Dmitriy Garagash

Hydraulic fracturing (HF) treatments can form widespread fractures. Understanding their containment at depth is critical, given the positive buoyancy contrast between the fracturing fluid and the surrounding rock, promoting upward growth. We study arrest m ...

American Rock Mechanics Association (ARMA), OnePetro2023

Deformation response of highly stretchable and ductile graphene kirigami under uniaxial and biaxial tension

Ye Wei, Yao Chen

Kirigami, the ancient technique of paper cutting, has been successfully applied to enhance the stretchability and ductility of nanoscale graphene. However, existing experimentally realized graphene kirigami (GK) are created by introducing parallel cuts, ex ...

Amer Physical Soc2023

Room-temperature strength of the interfacial bond between silica inclusions and iron

Andreas Mortensen, Alejandra Inés Slagter, David Hernandez Escobar

The strength of the interface between iron (Fe) and individual spherical silica (SiO2) inclusions of 5 +/- 1 mu m diameter is measured by means of in-situ micro-cantilever bending tests conducted under displacement control within a scanning electron micros ...

Pergamon-Elsevier Science Ltd2023

Multi-scale characterization and modeling of notched strength and translaminar fracture in hybrid thin-ply composites based on different carbon fiber grades

Guillaume Clément Broggi

Owing to their high specific stiffness and strength, Carbon Fiber Reinforced Composites (CFRP) are ideal candidates for the development of lightweight high-performance structures. Within this family, thin-ply composites allow for wider design freedom and p ...

EPFL2023

Full-Scale Experiments of Cyclically Loaded Welded Moment Connections with Highly Dissipative Panel Zones and Simplified Weld Details

Dimitrios Lignos, Andronikos Skiadopoulos

This paper presents the experimental results of two welded unreinforced flange-welded web (WUF-W) beam-to-column connections that defy the current design paradigm of prequalified welded connections. The proposed WUF-W connections feature customized beveled ...

2023

Exploring the potential of the critical shear crack theory for reinforced and post-tensioned glass beams: Initial analysis and experiments

Alain Nussbaumer, Pieter Christian Louter, Jagoda Cupac

In the evolution of structural glass beam elements, the requirements for post-fracture load bearing capacity and safe failure behaviour have led to the development of reinforced and post-tensioned beams. Maximum bending capacity in the post-fracture state ...

2023

Prediction of crack nucleation and propagation in porous ceramics using the phase-field approach

Arata Nakajo

The relevance of the phase-field approach to simulate the fracture in porous ceramics has been investigated. For this purpose, the conditions for the crack initiation using the phase-field model have been compared to the theoretical predictions of the coup ...

ELSEVIER2022

Deformation and Fracture of Tough Microstructured Hydrogels

Michael David Kessler

Many natural materials are structured on different length scales. This structuring often leads to an intricate interplay between soft and stiff components, which significantly improves the fracture toughness of these materials. A class of soft material tha ...

EPFL2022

Improving the Accuracy of Fracture Toughness Measurement in Burst Experiments

Guanyi Lu

Experimental studies suggest that the fracture toughness of rocks increases with the confining pressure. Among many methods to quantify this dependency, a so-called burst experiment (Abou-Sayed, 1978) may be the most widely applied in practice. Its thick w ...

SPRINGER WIEN2022

Determining crack kinematics from imaged crack patterns

Katrin Beyer, Bryan German Pantoja Rosero, Amir Rezaie, Ketson Roberto Maximiano Dos Santos

Determining the relationship between the cause of damage and the subsequent structural behavior of infrastructure systems requires an accurate characterization of the propagation of cracks, which represents the evolution of the damage state. When no inform ...

2022

Effects of velocity-dependent apparent toughness on the pre- and post-shut-in growth of a hydraulic fracture

Dong Liu, Guanyi Lu

We investigate the growth of a plane-strain/radial hydraulic fracture in an infinite impermeable medium driven by a constant injection rate assuming that the apparent toughness scales with the decreasing fracture growth rate in a power-law relation. The vi ...

ELSEVIER SCI LTD2022

Strong silicon oxide inclusions in iron

Andreas Mortensen, Léa Deillon, Alejandra Inés Slagter, Joris Pierre Everaerts

Oxide inclusions are ubiquitous in steel and are known to affect, generally in a negative sense, the mechanical performance of steel products. Micromechanical properties of those phases are therefore important, yet they have remained largely unexplored. We ...

2022

Experimental Investigation of Hydraulic Fracture Closure in a Porous Sandstone

Brice Tanguy Alphonse Lecampion, Seyyedmaalek Momeni, Guanyi Lu, Mohsen Talebkeikhah

Depending on the type of fracture propagation regime when the injection stops, the closure of the fracture may occur exactly after the injection ceases, in the case where the fracturing process is dominated by fracture energy, or the fracture propagate for ...

Onepetro2022