Publications related to Sol-gel deposition of nanostructured low refractive index materials on solar collector glazing

Related publications (30)

Colloidal Atomic Layer Deposition on Nanocrystals Using Ligand-Modified Precursors

Raffaella Buonsanti, Anna Loiudice, Petru Pasquale Albertini, Ona Segura Lecina, Philippe Benjamin Green, Jari Leemans, Mark Adrian Newton, Coline Marie Agathe Boulanger, Krishna Kumar

Atomic layer deposition (ALD) is a method to grow thin metal oxide layers on a variety of materials for applications spanning from electronics to catalysis. Extending ALD to colloidally stable nanocrystals promises to combine the benefits of thin metal oxi ...

Amer Chemical Soc2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Plasmonic Nanostructures for Photocatalysis: Material, Photonic and Electronic Effects

Fateme Kiani Shahvandi

Plasmonic photochemistry has a large potential to replace energy-intensive chemical processes with low-temperature, low-pressure light-driven chemical reactions. Plasmonic nanostructures have emerged as promising photocatalysts with exceptional and tunable ...

EPFL2024

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Sofia Libraro

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

EPFL2024

Long live(d) CsPbBr3 superlattices: colloidal atomic layer deposition for structural stability

Raffaella Buonsanti, Philippe Benjamin Green, Alexander Nicolas Chen

Superlattice formation afforded by metal halide perovskite nanocrystals has been a phenomenon of interest due to the high structural order induced in these self-assemblies, an order that is influenced by the surface chemistry and particle morphology of the ...

Royal Soc Chemistry2024

Hybrid organic/metal-oxide shells on semiconductor nanocrystals via colloidal atomic layer deposition

Ona Segura Lecina

The escalating energy demand and the imperative necessity to reduce the carbon footprint require transformative approaches to energy conversion. Materials chemistry plays a pivotal role in addressing these global challenges by developing novel materials fo ...

EPFL2024

Transparent structured conductive coating for applications in smart windows

Jérémy Jacques Antonin Fleury

Solar radiation reaching the surface of the earth for a period of one hour contains more energy than that consumed by mankind over an entire year. Some of this solar energy is already collected by photovoltaic cells to cover the electricity needs of buildi ...

EPFL2023

Silica aerogel as rear reflector in silicon heterojunction solar cells for improved infrared response

Deniz Türkay

Silicon (Si), with its indirect bandgap, is a non-ideal absorber. Thus, various strategies to boost silicon solar cells' efficiency, including advanced texturing, multilayer anti-reflecting coating, and rear reflectors are utilized. Dielectrics, deposited ...

ELSEVIER2023

Photoelectrochemical Cell Engineering for Solar Energy Conversion

Dan Zhang

Solar energy is the most abundant energy source, harnessing solar energy holds the solution to the challenge of increasing global energy demand and reducing our dependence on fossil fuels. Photovoltaics which directly convert solar energy into electricity ...

EPFL2023

Tuning the Solar Performance of Building Facades through Polymer 3D Printing: Toward Bespoke Thermo-Optical Properties

Stephen William Wasilewski

Facades are the primary interface controlling the flow of solar energy in buildings and affecting their energy balance and environmental impact. Recently, large-scale 3D printing (3DP) of translucent polymers has been explored as a technique for fabricatin ...

Wiley2023

Vapor Deposition of Perovskite Solar Cells

Quentin Jean-Marie Armand Guesnay

Thanks to the continuous improvement of crystalline silicon (c-Si) solar cells, largely dominating the market, photovoltaic electricity is nowadays the cheapest source of energy on the market. Yet, solar energy is far from being completely harvested, as t ...

EPFL2023

Molecular Tailoring of Pyridine Core-Based Hole Selective Layer for Lead Free Double Perovskite Solar Cells Fabrication

Mohammad Khaja Nazeeruddin

To solve the toxicity issues related to lead-based halide perovskitesolar cells, the lead-free double halide perovskite Cs2AgBiBr6 is proposed. However, reduced rate of charge transferin double perovskites affects optoelectronic performance. We designeda s ...

AMER CHEMICAL SOC2023

Synthesis of metal oxide-overcoated carbon materials by liquid phase ALD and their applications in catalysis

Farzaneh Talebkeikhah

Coating nano particles and other substrates for efficiency enhancement, protection and obtaining new atomic structures is a widespread research topic in catalysis and material synthesis. Thus far, different approaches of coating, ranging from simplest to s ...

EPFL2023

Investigation and Mitigation of Moisture- and Potential-Induced Degradation Mechanisms of Silicon Heterojunction Solar Cells and Modules

Olatz Arriaga Arruti

Photovoltaic (PV) technology is one of the most promising renewable energy sources. The PV market is dominated by crystalline silicon (c-Si) based technologies, thus ensuring their long-term performance is of paramount importance for manufacturers, investo ...

EPFL2023

Semiconductor-based device architectures in multimaterial fibers

William Nicolas Duncan Esposito

Semiconductor materials have given rise to today's digital technology and consumer electronics. Widespread adoption is closely linked to the ability to process and integrate them in devices at scale. Where flexibility and large surfaces are required, such ...

EPFL2023

III-V Nitride Semiconductors Deposited At Low Temperature For Photovoltaic Applications

Jonathan Emanuel Thomet

This thesis reports on the study and use of low temperature processes for the deposition of indium gallium nitride (InGaN) thin films in order to alleviate some of the present drawbacks of its monolitic deposition on silicon for photovoltaic applications. ...

EPFL2023

Modeling reflection by structured building-integrated photovoltaics

Stephen William Wasilewski

Evaluating the reflection of solar radiation by Building Integrated Photovoltaics (BIPV) with structured front-glass is challenging for two reasons. First, the resulting irregular scattering of light cannot be accounted for by simple reflection models. Sec ...

IOP Publishing2023

Zn3P2 as an earth-abundant photovoltaic material: from growth to device

Rajrupa Paul

The development of cost-effective and earth-abundant semiconducting materials is imperative for the sustainable deployment of photovoltaic technology. Zinc phosphide (Zn3P2) is a promising candidate for terawatt-scale electricity generation. It has a near- ...

EPFL2023

Accurate color characterization of solar photovoltaic modules for building integration

Christophe Ballif, Antonin Faes, Alessandro Francesco Aldo Virtuani, Jordi Escarre Palou, Alejandro Borja Block

Accurate and reproducible color characterization is essential for colored building integrated photovoltaic products, both for manufacturing quality control and assessing long-term color stability. However, existing characterization techniques struggle to a ...

Pergamon-Elsevier Science Ltd2023

Beam radiation penetration in particle b e ds for heat transfer modeling of a centrifugal solar particle receiver

Evan Fair Johnson

This article describes a study of beam radiation striking particle beds of randomly packed, spherical par-ticles. The current study is focused on concentrating solar power receivers which use solid particles as a heat transfer medium, but results are appli ...

PERGAMON-ELSEVIER SCIENCE LTD2023