Publications related to Anisotropic features of the mechanical behaviour of Opalinus clay

Related publications (31)

Insights from an extensive triaxial testing campaign on a shale for comparative site characterization of a deep geological repository

Lyesse Laloui, Alessio Ferrari, Eleonora Crisci

Several boreholes were drilled for site comparison of a deep geological repository (DGR) in Northern Switzerland. The main target of the exploration program was the >100m thick Opalinus Clay, the designated host rock encountered at approximately 450 to 100 ...

Elsevier2024

Microbial hydrogen sinks in the sand-bentonite backfill material for the deep geological disposal of radioactive waste

Rizlan Bernier-Latmani, Manon Frutschi, Nicolas Louis Maurice Jacquemin, Simiao Wang, Niels Burzan, Aislinn Ann Boylan, Camille Aude Rolland

The activity of subsurface microorganisms can be harnessed for engineering projects. For instance, the Swiss radioactive waste repository design can take advantage of indigenous microorganisms to tackle the issue of a hydrogen gas (H2) phase pressure build ...

Frontiers Media SA2024

Thermo-hydro-mechanical behaviour of the Callovo-Oxfordian claystone under thermal changes

Héloïse Manon Fuselier

Underground storage of radioactive waste is consensually recognised as the safest storage solution by European and worldwide countries relying mainly or partially on nuclear energy production. Over twenty years of research led by the French national agency ...

EPFL2024

A FEM modelling workflow to simulate THM effects in the rock around nuclear waste packages

Matthias Timothee Stanislas Wojnarowicz

High-level waste, stemming from nuclear electricity generation poses significant environmental and safety concerns. Currently, high-level wastes are stored in interim facilities needing constant monitoring and waiting for a definitive solution. Deep geolog ...

EPFL2024

Evolution of water content and suction of Opalinus Clay from recovery at the drilling site to handling in the laboratory

Lyesse Laloui, Alessio Ferrari, Angelica Tuttolomondo

Advanced geotechnical engineering applications, such as shale gas extraction, CO2 geological sequestration, and geological radioactive waste storage, often involve various types of shales located at significant depths. Shales exhibit mechanical properties ...

Pergamon-Elsevier Science Ltd2024

Modeling friction and wear using an adaptive discrete-continuum coupling

Manon Eugénie Voisin--Leprince

When two objects slide against each other, wear and friction occur at their interface. The accumulation of wear forms what is commonly referred to as a ``third-body''. Understanding third-body evolution has significant applications in industry, where contr ...

EPFL2024

Challenges of COVID-19 Case Forecasting in the US, 2020-2021

Joseph Chadi Benoit Lemaitre, Pan Xu

During the COVID-19 pandemic, forecasting COVID-19 trends to support planning and response was a priority for scientists and decision makers alike. In the United States, COVID-19 forecasting was coordinated by a large group of universities, companies, and ...

Public Library Science2024

Good enough: Intermediate complexity atmospheric models improve the representation of processes affecting seasonal snow

Dylan Stewart Reynolds

Snow plays a crucial role in processes regulating ecosystems, the climate, and human development. Mountain snowpack in particular has great relevance for downstream communities. Knowledge about the distribution and properties of the snowpack thus help in p ...

EPFL2024

Dislocation Hardening in a New Manufacturing Route of Ferritic Oxide Dispersion-Strengthened Fe-14Cr Cladding Tube

Roland Logé

The microstructure evolution associated with the cold forming sequence of an Fe-14Cr-1W-0.3Ti-0.3Y2O3 grade ferritic stainless steel strengthened by dispersion of nano oxides (ODS) was investigated. The material, initially hot extruded at 1100 degrees C an ...

MDPI2024

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Xhemsi Malja

Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...

EPFL2024

Short-term behavior of glass fiber-polymer composite bending-active elastica beam under service load application

Thomas Keller, Landolf-Giosef-Anastasios Rhode-Barbarigos, Tara Habibi

Bending-active elastica beam is a structural configuration that is based on the elastic deformation of an initially straight beam. This deformation occurs when horizontal displacements are applied to a sliding support, causing the beam to bend into an arch ...

2024

Network time series forecasting in photovoltaics power production

Jelena Simeunovic

Accurate forecasting of photovoltaic (PV) power production is crucial for the integration of more renewable energy sources into the power grid. PV power production is highly intermittent, due to the stochastic cloud behaviour and cloud dynamics. Previous w ...

EPFL2024

Numerical investigation of two-dimensional Mode-II delamination in composite laminates

Thomas Keller, Anastasios Vassilopoulos, Congzhe Wang

Existing standards for delamination tests on composite materials typically employ one-dimensional (1D) beam specimens. However, such specimens may not represent real delamination scenarios in composite structures, where cracks tend to propagate in two dime ...

Elsevier Sci Ltd2024

Urban boundary-layer flows in complex terrain: Dynamic interactions during a hot and dry summer season in Phoenix, Arizona

Aldo Brandi

Anthropogenic modification of natural landscapes to urban environments impacts land-atmosphere interactions in the boundary layer. Ample research has demonstrated the effect of such landscape transitions on development of the urban heat island (UHI), but c ...

Wiley2024

Experimental and Numerical Investigation on Water Exchange of Opalinus Clay Samples

Alessio Ferrari, Eleni Stavropoulou, Qazim Llabjani

Opalinus Clay is a fine-grained sedimentary geomaterial with a mineral composition consisting mainly of silicates, carbonates and quartz. Due to its favourable barrier properties, this geomaterial has been selected as the host rock for the underground disp ...

Wei Wu, Universität für Bodenkultur2023

Hydro-Mechanical Characterization of a Shale by Unusually High-Pressure Oedometric Tests

Alessio Ferrari, Eleonora Crisci

The note presents selected results of an experimental campaign conducted with the aim to investigate the hydro-mechanical behaviour of a shale recovered at a depth of about 900 m below the ground. High-pressure oedometric tests were performed to investigat ...

Wei Wu, Universität für Bodenkultur2023

High-performance triboelectric nanogenerator via photon-generated carriers for green low-carbon system

Xin Chen

Enhancing the surface charge density and reducing the output impedance via innovative techniques are essential to accelerate the commercialization of triboelectric nanogenerators (TENGs). However, methods for increasing output performance have numerous lim ...

Elsevier2023

Acetal-Stabilized Carbohydrates as Novel Platform Molecules for Renewable Polymer Production

Lorenz Perry Manker

To address the rising demand for plastics, it is essential to create new types of polymers that are both highly recyclable and emit minimal amounts of greenhouse gases. These plastics should be derived from readily available, renewable feedstocks. Such eff ...

EPFL2023

Reinforcement Learning for Outdoor Balloon Navigation: A Successful Controller for an Autonomous Balloon

Simon Jeger, Mirko Kovac

Autonomous ballooning allows for energy-efficient long-range missions but introduces significant challenges for planning and control algorithms, due to their single degree of actuation: vertical rate control through either buoyancy or vertical thrust. Late ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2024

Incorporation of Lignin in Bio-Based Resins for Potential Application in Fiber-Polymer Composites

Mateus De Assunção Hofmann

Bio-based resins, obtained from renewable raw materials, are a more sustainable alternative to oil-based resins for fiber-reinforced polymer (FRP) composites. The incorporation of lignin in those resins has the potential to enhance their performance. This ...

MDPI2023