Publication

Stability and performance of tape cast anode supported electrolyte (ASE) cells

Jan Van Herle, Raphaël Ihringer
2002
Conference Papers

Abstract

Recent progress in our development of anode supported electrolyte (ASE) SOFcells is reported. The cells are fabricated by cocasting of aqueous slurries of NiO/YSZ and 8YSZ, followed by cofiring. A gradient cathode is deposited by screenprinting successive layers of LSM/YSZ composite and lanthanum cobaltite, followed by a 2nd firing step. Full cells show a final thickness of ? 0.25 mm, high flexibility and reasonable warpage. Proper anode current collection is crucial and obtained by cofiring an additional outer layer together with the substrate. Power density can reach 0.2 W/cm2 at 600°C with active cathodes (LSC, short-lived) and >1 W/cm2 at 810°C with the LSM cathode. Stability was tested during 2900 h, giving an average degradation of 3%/1000 h at 0.5 A/cm2 current density. Degradation can be delayed by short-time polarisation at higher current density: e.g. “reactivation” at 0.85 A/cm2 (30 min.) delayed degradation by 300 h.

Official source

https://infoscience.epfl.ch/entities/publication/e13156a0-95da-45fe-8a2f-a4f3b5081ced

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Graph Chat

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Jan Van Herle, Raphaël Ihringer
2002
Conference Papers

Abstract

Official source

https://infoscience.epfl.ch/entities/publication/e13156a0-95da-45fe-8a2f-a4f3b5081ced

About this result

Related concepts (32)

Solid oxide fuel cell

A solid oxide fuel cell (or SOFC) is an electrochemical conversion device that produces electricity directly from oxidizing a fuel. Fuel cells are characterized by their electrolyte material; the SOFC has a solid oxide or ceramic electrolyte. Advantages of this class of fuel cells include high combined heat and power efficiency, long-term stability, fuel flexibility, low emissions, and relatively low cost. The largest disadvantage is the high operating temperature which results in longer start-up times and mechanical and chemical compatibility issues.

Cathodic protection

Cathodic protection (CP; kaeˈTQdIk) is a technique used to control the corrosion of a metal surface by making it the cathode of an electrochemical cell. A simple method of protection connects the metal to be protected to a more easily corroded "sacrificial metal" to act as the anode. The sacrificial metal then corrodes instead of the protected metal. For structures such as long pipelines, where passive galvanic cathodic protection is not adequate, an external DC electrical power source is used to provide sufficient current.

Current density

In electromagnetism, current density is the amount of charge per unit time that flows through a unit area of a chosen cross section. The current density vector is defined as a vector whose magnitude is the electric current per cross-sectional area at a given point in space, its direction being that of the motion of the positive charges at this point. In SI base units, the electric current density is measured in amperes per square metre. Assume that A (SI unit: m2) is a small surface centred at a given point M and orthogonal to the motion of the charges at M.

Related publications (13)

Stability and performance of tape cast anode supported electrolyte (ASE) cells

Chat with Graph Search

Transport Phenomena in Pure-Water CO2 Electrolysis with Bipolar Membranes in Forward Bias

Catalyst and Electrode Design for Selective and Durable Copper-Catalyzed Electrochemical Carbon Dioxide Reduction

Oil Shale Upcycling to Battery-Grade Graphitic Carbon with CO2-Free H2 Coproduction