Three-dimensional microstructural mapping of poisoning phases in the Neodymium Nickelate solid oxide fuel cell cathode

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

The aqueous zinc-ion battery is promising as grid scale energy storage device, but hindered by the instable electrode/electrolyte interface. Herein, we report the lean-water ionic liquid electrolyte for aqueous zinc metal batteries. The lean-water ionic li ...

Abstract The degradation of metal interconnects (ICs) in Solid Oxide Cells (SOCs) primarily results from chromium (Cr) oxide scale growth on stainless-steel substrates, causing ohmic loss and air-side electrode poisoning by Cr. This thesis addresses these ...

In this work, various methods were used to improve the printability of a photocurable polyvinylsilazane resin filled with silicon nitride particles for digital light processing. The developed resin was used as a preceramic polymer for polymer-to-ceramic co ...

Hydrogen fuel cells are an essential component of hydrogen economy, which have been advocated as a major path towards the decarbonization of the energy sector. Within the two main types of low-temperature hydrogen fuel cells, anion-exchange membrane fuel c ...

This thesis aims at the site-specific realization of self-assembled field-effect transistors (FETs) based on semiconducting Zinc oxide NWs and their application towards chemical and bio-sensing in liquid medium. At first, a solution based growth method for ...

Cell durability is a crucial technological issue for SOFC commercialization, and considerable progress has been made in recent years. A number of degradation pathways have been established, amongst which microstructural changes, poisoning effects and forma ...

This thesis presents the fabrication and characterization of organic thin film transistors (TFTs) on flexible polymer substrates and the development of compliant stencil lithography to significantly improve the patterning resolution on full-wafer scale. Po ...

Silicon wafer wire-sawing experiments were realized with different sets of sawing parameters, and the thickness, roughness, and cracks depth of the wafers were measured. The results are discussed in relation to assumptions underlying the rolling-indenting ...

Since few decades the search of new catalysts formulations for fuel cell applications has motivated numerous projects especially due to the future lack of fossil fuel, environmental and economical reasons. Consequently, Direct Alcohol Fuel Cell (DAFC) or D ...

Wavelength selective coatings are of common use in order to enhance the efficiency of devices heated by radiation such as solar thermal collectors. The use of suitable materials and the optimization of coating layer thicknesses are advisable ways to maximi ...

Here we show a method for patterning a thin metal film using self-assembled block-copolymer micelles monolayers as a template. The obtained metallic mask is transferred by reactive ion etching in silicon oxide, silicon and silicon nitride substrates, thus ...

Gas barrier coatings based on single or multiple layers of metals, oxides or nitrides are widely used on polymer substrates in applications ranging from food packaging to organic displays and solar cells. These coatings exhibit a residual permeability resu ...

Precious alloys are subjected to a series of mechanical and thermal operations during manufacturing. For 18 carat gold alloys the processing operations can induce L1(0) ordered nanodomains, known to lead to the buildup of residual stresses, which are the p ...

We report on the fabrication and electrical characterization of functionalized solid-state nanopores in low stress silicon nitride membranes. First, a pore of approximately 50 nm diameter was drilled using a focused ion beam technique, followed by the loca ...

Powder additive pulsed Nd:YAG laser (wavelength 1064 nm), with the aim of preparing AM of such material. The influence of oxygen content in the initial silicon powders on the continuous tracks morphology was investigated. It was found that the initial oxyg ...

The search of new energy sources has motivated during the last few years numerous research projects due to environmental, economical and political reasons. One of the main subjects of these works is the development of fuel cells. Within this framework the ...

The electrochemical reduction of CO2 to higher hydrocarbons is a very challenging process that has high potential for the storage of large amounts of renewable energy with a high gravimetric and volumetric energy density. The distribution of hydrocarbons f ...

Perovskites have been widely studied for electrocatalysis due to the exceptional activity they exhibit for surface-mediated redox reactions. To date, descriptors based on density functional theory calculations or experimental measurements have assumed a bu ...

In this study, SiC ceramic substrates were prepared with 99.5% silicon carbide powders which were came from waste silicon mud during the manufacturing process of solar cells. It is found that a SiO2 layer with 50 nm in thickness is present on the SiC surfa ...

Three-dimensional microstructural mapping of poisoning phases in the Neodymium Nickelate solid oxide fuel cell cathode

Chat with Graph Search

Electrochemical Hydrophobic Tri-layer Interface Rendered Mechanically Graded Solid Electrolyte Interface for Stable Zinc Metal Anode

Spinel Protective Coatings for Solid Oxide Cell (SOC) Interconnects (ICs)

Influence of Si3N4 fillers and pyrolysis profile on the microstructure of additively manufactured silicon carbonitride ceramics derived from polyvinylsilazane

The design and development of anion exchange membranes for hydrogen fuel cells

Self-Assembled Liquid-Gated Zinc Oxide Nanowire Transistors : Fabrication and Sensing Operation

TEM investigation on zirconate formation and chromium poisoning in LSM/YSZ cathode

Organic Pentacene Thin Film Transistors on Flexible Substrates Fabricated by Stencil Lithography

Mechanisms of wafer sawing and impact on wafer properties

Self and induced stabilized nanoparticles for electrocatalysis

Modeling the absorption behavior of solar thermal collector coatings utilizing graded a-C:H/TiC layers

Fabrication of nanopore arrays and ultrathin silicon nitride membranes by block-copolymer-assisted lithography

Hybrid nanocomposite gas-barrier coatings on polymers

Influence of thermo-mechanical history on the ordering kinetics in 18 carat Au alloys

Fabrication and functionalization of nanochannels by electron-beam-induced silicon oxide deposition

Impact of oxygen content in powders on the morphology of the laser molten tracks in preparation for additive manufacturing of silicon

Investigation of platinum-based nanoparticles on boron-doped diamond substrate for applications in electrocatalysis

The role of malachite nanorods for the electrochemical reduction of CO2 to C-2 hydrocarbons

The Effect of Surface Reconstruction on the Oxygen Reduction Reaction Properties of LaMnO3

Structural and microstructural studies on SiC-SiO2 ceramic composites