Publications related to Active load cell with positive, negative and zero stiffness operating modes for micronewton range contact force monitoring in electrical probing

Related publications (32)

Short-term behavior of glass fiber-polymer composite bending-active elastica beam under service load application

Thomas Keller, Landolf-Giosef-Anastasios Rhode-Barbarigos, Tara Habibi

Bending-active elastica beam is a structural configuration that is based on the elastic deformation of an initially straight beam. This deformation occurs when horizontal displacements are applied to a sliding support, causing the beam to bend into an arch ...

2024

Computational Homogenization for Inverse Design of Surface-based Inflatables

Mark Pauly, Florin Isvoranu, Francis Julian Panetta, Yingying Ren, Seiichi Eduardo Suzuki Erazo, Uday Kusupati

Surface-based inflatables are composed of two thin layers of nearly inextensible sheet material joined together along carefully selected fusing curves. During inflation, pressure forces separate the two sheets to maximize the enclosed volume. The fusing c ...

Association for Computing Machinery (ACM)2024

Modeling friction and wear using an adaptive discrete-continuum coupling

Manon Eugénie Voisin--Leprince

When two objects slide against each other, wear and friction occur at their interface. The accumulation of wear forms what is commonly referred to as a ``third-body''. Understanding third-body evolution has significant applications in industry, where contr ...

EPFL2024

Alleviating nanostructural phase impurities enhances the optoelectronic properties, device performance and stability of cesium-formamidinium metal-halide perovskites

Anaël Morgane Jaffrès, Christophe Ballif, Quentin Thomas Jeangros, Aïcha Hessler-Wyser, Christian Michael Wolff, Mostafa Rabie Shlaly Bahr Othman, Daniel Anthony Jacobs, Austin George Kuba

The technique of alloying FA+ with Cs+ is often used to promote structural stabilization of the desirable alpha-FAPbI3 phase in halide perovskite devices. However, the precise mechanisms by which these alloying approaches improve the optoelectronic quality ...

Royal Soc Chemistry2024

Atomic-scale Characterization of Strain and Gate effects on Two-dimensional Materials by Scanning Tunneling Microscopy

Jz -Yuan Juo

Strain is an inevitable phenomenon in two-dimensional (2D) material, regardless of whether the film is suspended or supported. Moreover, strain is known to alter the physical and chemical properties, such as the band gap, charge carrier effective masses, d ...

EPFL2023

C-shells: Deployable Gridshells with Curved Beams

Mark Pauly, Francis Julian Panetta, Yingying Ren, Quentin Christian Becker, Seiichi Eduardo Suzuki Erazo, Davide Pellis

We introduce a computational pipeline for simulating and designing C-shells, a new class of planar-to-spatial deployable linkage structures. A C-shell is composed of curved flexible beams connected at rotational joints that can be assembled in a stress-fre ...

Association for Computing Machinery (ACM)2023

FIB-Fabrication of Resonating Cantilevers to Explore Symmetry-Breaking in Quantum Materials

Amelia Emily-Kay Estry

Scientific progress and technological advancements on novel materials are often deterred by limitations on size and quality of samples. Materials with electronic phenomena attractive for applications, and presenting many open scientific questions, are ofte ...

EPFL2023

Strain Gradients and Magnetoresistance in Microstructured 3D Topological Semi-metals

Jonas De Jesus Diaz Gomez

Three-dimensional topological semimetals have emerged as strong candidates to probe new fundamental physical phenomena that could be exploited to develop next generation electronics. However, many aspects of their electronic properties remain unclear. Thi ...

EPFL2023

A study of the K^(+) → π^(0)e^(+)νγ decay

Alessandro Mapelli, Alina Kleimenova, Radoslav Marchevski

A sample of 1.3 x 10^(5) K^(+) → π^(0)e^(+)νγ candidates with less than 1% background was collected by the NA62 experiment at the CERN SPS in 2017-2018. Branching fraction measurements are obtained at percent relative precision in three restricted kinemati ...

Springer Nature2023

In situ detection of multitarget impurities on contact lens by electrochemical scanning probe

Fang Liu, Tzu-En Lin, Yingdi Zhu

Identifying multitarget impurities on contact lenses is challenging because traditional methods such as polymerase chain reaction cannot be used on the unknown target. Other sampling methods often require expensive antibodies or dyes. Therefore, this resea ...

ELSEVIER SCIENCE SA2023

Mechanics of Physical Knots: From Filaments in Contact to Surgical Suturing

Paul Johanns

In this thesis, we study the mechanics of tight physical knots. Knots are omnipresent in surgery, climbing, and sailing, with disastrous consequences when the filament or the rope fails to perform its function. Even if the importance of mechanical analysis ...

EPFL2023

Computational Exploration of Multistable Elastic Knots

Mark Pauly, Yingying Ren, Michele Vidulis

We present an algorithmic approach to discover, study, and design multistable elastic knots. Elastic knots are physical realizations of closed curves embedded in 3-space. When endowed with the material thickness and bending resistance of a physical wire, t ...

Association for Computing Machinery (ACM)2023

Bounding the localized to ductile transition in porous rocks: implications for geo-reservoirs

Marie Estelle Solange Violay, Gabriel Gérard Dominique Meyer

Porous rocks have long been the focus of intense research driven by their importance in our society as host to our most essential resources (oil, gas, water, geothermal energy, etc), yet their rheology remains poorly understood. With increasing depth, poro ...

2023

Epigenome-wide DNA methylation in externalizing behaviours: A review and combined analysis

Maria del Carmen Sandi Perez

DNA methylation (DNAm) is one of the most frequently studied epigenetic mechanisms facilitating the interplay of genomic and environmental factors, which can contribute to externalizing behaviours and related psychiatric disorders. Previous epigenome-wide ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Elastic limit tensile stress of UHPFRC: Method of determination and effect of fiber orientation

Eugen Brühwiler, Emmanuel Denarié, Jian Zhan

This paper discusses the influence of fiber orientation on elastic limit tensile stress of ultra-high performance fiber reinforced cementitious composites (UHPFRC). An original model relating elastic limit tensile stress to fiber orientation is proposed, a ...

2023

Microscopic Digital Image Correlation Analysis of Strain Distributions in Stainless Steel 316L Induced by Multiaxial Cyclic Loading

Elif Cansu Kursun

Fatigue damage in materials results in localized strain at the microstructural level. In many engineering components of the cooling circuits of nuclear power plants, where austenitic steels are used, the material experiences multiaxial cyclic loading, eith ...

EPFL2023

Laser powder bed fusion of Fe-based shape memory alloys for novel structural metamaterials and "smart" structures

Irene Ferretto

Laser powder bed fusion (LPBF) is a powder-based additive manufacturing (AM) technique, which shows great potential in the production of complex-shaped parts with unprecedented design freedom. In addition, it allows for an active manipulation of the micros ...

EPFL2023

Vibrational NDT with Under-sampled Data through Physics-informed Neural Networks

Olga Fink

The vibrational response of solid materials and structural components is substantially governed by their mechanical and geometrical properties. Low-frequency vibrations and modal frequencies are sensitive to global geometrical deviations, while high-freque ...

2023

Epidemic Learning: Boosting Decentralized Learning with Randomized Communication

Rachid Guerraoui, Anne-Marie Kermarrec, Rafael Pereira Pires, Rishi Sharma, Marinus Abraham de Vos, Sadegh Farhadkhani

We present Epidemic Learning ( EL ), a simple yet powerful decentralized learning (DL) algorithm that leverages changing communication topologies to achieve faster model convergence compared to conventional DL approaches. At each round of EL, each node sen ...

2023

Dated: Guidelines for Creating Synthetic Datasets for Engineering Design Applications

Jürg Alexander Schiffmann, Cyril Picard

Exploiting the recent advancements in artificial intelligence, showcased by ChatGPT and DALL-E, in real-world applications necessitates vast, domain-specific, and publicly accessible datasets. Unfortunately, the scarcity of such datasets poses a significan ...

Amer Soc Mechanical Engineers2023