Publication

Analyzing and Boosting the Performance of Power-Line Communication Networks

Related publications (30)

Exact Expressions for Lightning Electromagnetic Fields: Application to the Rusck Field-To-Transmission Line Coupling Model

An exact analytical expression for the electric field of the return stroke as excited by a propagating step current source is derived in this paper. This expression could be advantageously used to evaluate the disturbances caused by lightning on overhead l ...

2023

On Energy Control of Modular Multilevel Converters

Milan Utvic

Owing to the advancements in the area of power electronics, efficient and flexible ac to dc conversion is made possible, bringing back into focus the idea of the dc power transmission at various voltage levels. Several technical and economical factors advo ...

EPFL2023

A Lightweight Device for Energy Harvesting from Power Lines with a Fixed-Wing UAV

Dario Floreano, William John Stewart

Modern UAVs (Unmanned Aerial Vehicles) suffer from restrictions in flight range and time due to battery capacity limitations. One way to overcome these limitations is to harvest energy from overhead power lines. A growing body of scientific literature has ...

IEEE2022

Increasing Cellular Network Energy Efficiency for Railway Corridors

Ruben Merz, Andreas Peter Burg, Adrian Schumacher

Modern trains act as Faraday cages making it challenging to provide high cellular data capacities to passengers. A solution is the deployment of linear cells along railway tracks, forming a cellular corridor. To provide a sufficiently high data capacity, m ...

IEEE2022

High frequency IGCT operation for DC transformer

Gabriele Ulissi

In spite of the dominance of ac technology for the vast majority of power transmission and distribution since the late 19th century, the past decades have seen an increase in use of dc electrical power. In particular, this has been the case both in high vo ...

EPFL2022

Field-to-Transmission Line Coupling Models With Special Attention to the Cooray–Rubinstein Approximation

Marcos Rubinstein

There are three equivalent procedures to evaluate the voltages induced by lightning on power lines, namely, the Agrawal–Price–Gurbaxani model, the Taylor–Satterwhite–Harrison model, and the Rachidi model. The Cooray–Rubinstein approximation is a procedure ...

2021

An Efficient Methodology for the Evaluation of the Lightning Performance of Overhead Lines

Farhad Rachidi-Haeri

This article proposes a method for the derivation of a formula that links the maximum lightning-induced-overvoltage occurring on an overhead distribution line with the variables that characterize the lightning return stroke, such as the peak current, front ...

2021

Lightning-Induced Voltages on Overhead Distribution Lines Computed through Analytical Expressions for the Electromagnetic Fields

Farhad Rachidi-Haeri, Marcos Rubinstein

The evaluation of lightning ElectroMagnetic (EM) fields represents the most cumbersome part of the lightning-induced voltages computation process. Their evaluation is usually performed through a numerical routine or with simplified analytical expressions, ...

2021

A scalable, line-independent control design algorithm for voltage and frequency stabilization in AC islanded microgrids

Giancarlo Ferrari Trecate, Michele Tucci

We propose a decentralized control synthesis procedure for stabilizing voltage and frequency in AC Islanded microGrids (ImGs) composed of Distributed Generation Units (DGUs) and loads interconnected through power lines. The presented approach enables Plug- ...

2020

Time reversal applied to fault location in power networks: Pilot test results and analyses

Mario Paolone, Reza Razzaghi, Zhaoyang Wang

This paper presents the results of a pilot test performed on a real medium voltage distribution network in Switzerland with the aim of assessing the performance of a fault location system relying on the Electromagnetic Time Reversal (EMTR) method. To the b ...

2020

Electromagnetic Time Reversal: Theory, Application to Fault Location in Power Networks and Experimental Validation

Zhaoyang Wang

The time-reversal invariance is readily described and universally embodied in most laws of nature, either in a strict or in a soft sense. Based on this underlying physical principle, time-reversal theory has been theoretically and experimentally studied in ...

EPFL2020

Scalable Solid State Bus Tie Switch for Flexible Shipboard Power Systems

Drazen Dujic, Gabriele Ulissi

The need to increase efficiency and reduce operating cost of shipboard DC power distribution networks results in a desire to increase the operating voltage of such installations to the medium voltage levels. Devices such as solid state bus-tie switches are ...

2020

Hierarchical Control in Islanded DC Microgrids With Flexible Structures

Alessio La Bella, Giancarlo Ferrari Trecate, Pulkit Nahata

Hierarchical architectures stacking primary, secondary, and tertiary layers are widely employed for the operation and control of islanded dc microgrids (dcmGs) composed of distribution generation units (DGUs), loads, and power lines. However, a comprehensi ...

2020

IGCT Based Solid State Resonant Conversion

Dragan Stamenkovic

Driven by the environmental changes, penetration of renewables and the need for more flexible power grid, DC is reemerging as a basis for future power networks. Already established in the area of HVDC for very long distance transmission, more and more atte ...

EPFL2020

Properties of Direct-Time and Reversed-Time Transfer Functions to Locate Disturbances along Power Transmission Lines

Mario Paolone, Zhaoyang Wang, Zhe Chen

The paper discusses specific frequency-domain properties of the electromagnetic time reversal (EMTR) method applied to locate faults and, more in general, disturbances in power networks. Specifically, we investigate the properties of two transfer functions ...

IEEE2019

100kW, 10kHz Medium Frequency Transformer Design Optimization and Experimental Verification

Marko Mogorovic, Drazen Dujic

This paper describes a novel, model based, design optimisation methodology for high-power medium frequency transformers for medium-voltage high-power electronic applications, namely emerging solid state transformers. Presented procedure enables the designe ...

2019

Bits through Time

Elie Najm

In any communication system, there exist two dimensions through which the information at the source becomes distorted before reaching the destination: the noisy channel and time. Messages transmitted through a noisy channel are susceptible to modification ...

EPFL2019

Reliable and Robust Cyber-Physical Systems for Real-Time Control of Electric Grids

Wajeb Saab

Real-time control of electric grids is a novel approach to handling the increasing penetration of distributed and volatile energy generation brought about by renewables. Such control occurs in cyber-physical systems (CPSs), in which software agents maintai ...

EPFL2019

Sensitivity Analysis of Medium Frequency Transformer Designs for Solid State Transformers

Marko Mogorovic, Drazen Dujic

This paper discusses the technical challenges and trade-offs tied to design of medium frequency transformers for medium-voltage high-power applications and emerging solid state transformers. A dedicated design optimization algorithm is used to generate the ...

2019

Optimal Number of Paths with Multipath Routing in Hybrid Networks

Patrick Thiran, Sébastien Christophe Henri

In recent years, multipath routing, i.e., employing several paths simultaneously, has emerged as an efficient way to provide significant throughput gains in local networks. This has been observed both with technologies that are not subject to interference, ...

2018