Publications related to The effect of processing conditions on the microstructure and impact behavior of melt infiltrated Al/SiCp composites

Related publications (26)

Industrial European regions at risk within the Fit for 55: How far implementing CBAM can mitigate?

The transition to a low-carbon economy can create new job opportunities but may cause job displacement in some sectors that heavily rely on fossil fuels. In order to gain a balanced appraisal in understanding the broader consequences of climate policies, t ...

2025

Self-catalysed frontal polymerisation enables fast and low-energy processing of fibre reinforced polymer composites

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal

Frontal polymerisation has the potential to bring unprecedented reductions in energy demand and process time to produce fibre reinforced polymer composites. Production of epoxy-based fibre reinforced polymer parts with high fibre volume content, commonly e ...

2024

Two-dimensional quasi-static delamination in composite laminates under Mode-I and Mode-II conditions

Congzhe Wang

Fiber-polymer composites consist of a polymer matrix and reinforcing fibers made of various materials. These composites exhibit exceptional properties, such as a high strength-to-weight ratio and excellent corrosion resistance, which has led to their incre ...

EPFL2024

Solar-assisted clean steam generator, a cleaner production approach for sustainable healthcare facilities

Mohammad Jamshidmofid, Fernando Porté Agel

Healthcare sector buildings, particularly hospitals, significantly contribute to global energy consumption and greenhouse gas emissions. Hospitals require a substantial amount of steam, including the essential hygienic or " clean steam, " that is currently ...

Elsevier Sci Ltd2024

Renewable energy integration and waste heat valorization in aluminum remelting for co-producing kerosene and methanol

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...

Associazione Italiana Di Ingegneria Chimica2024

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Helena Luisa Teixido Pedarros

Nowadays, Liquid Composite Molding techniques are often used to manufacture high quality fiber reinforced composite parts at a relatively low cost. These involve an infiltration process, in which a liquid resin is forced to ingress into a dry fibrous porou ...

EPFL2023

Location is a major barrier for transferring US fossil fuel employment to green jobs

Michaël Aklin

The green energy revolution may displace 1.7 million fossil fuel workers in the US but a Just Transition to emerging green industry jobs offers possibilities for re-employing these workers. Here, using 14 years of power plant data from the US Energy Inform ...

Nature Research2023

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: Experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/ graphite preforms

Ludger Weber, Caroline Hain, Manoj Kondibhau Naikade, Annapaola Parrilli

Porous carbonaceous preforms, made from graphite and silicon carbide (SiC) powders, with varying graphite powder mass fractions and particle sizes, were infiltrated at 1500 degrees C and 1700 degrees C by Si-8 at. pct Zr alloy to produce dense Si-Zr-SiC co ...

ELSEVIER SCI LTD2023

Heat pumping and renewable energy integration for decarbonizing brewery industry and district heating

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

The energy integration of brewery plants and urban agglomerations has many benefits in terms of rational energy use and reduced environmental impact, especially during scenarios of uncertain supply chain and volatile market prices. In fact, the diversifica ...

Elsevier2023

Multi-scale characterization and modeling of notched strength and translaminar fracture in hybrid thin-ply composites based on different carbon fiber grades

Guillaume Clément Broggi

Owing to their high specific stiffness and strength, Carbon Fiber Reinforced Composites (CFRP) are ideal candidates for the development of lightweight high-performance structures. Within this family, thin-ply composites allow for wider design freedom and p ...

EPFL2023

Sinter-Resistant Nickel Catalyst for Lignin Hydrogenolysis Achieved by Liquid Phase Atomic Layer Deposition of Alumina

Jeremy Luterbacher, Songlan Sun, Farzaneh Talebkeikhah

Lignin hydrogenolysis is a key step in the sustainable production of renewable bio-based chemicals and fuels. Heterogeneous metal catalysts have led to high yields but they rapidly deactivate, notably due to nanoparticle sintering and carbonaceous deposit ...

2023

Energy, SBS symptoms, and productivity in Swiss open-space offices: Economic evaluation of standard, actual, and optimum scenarios

Dolaana Khovalyg, Dusan Licina, Verena Marie Barthelmes, Arnab Chatterjee, Cecile Anne Berquand

The fundamental aspiration of new-generation high-performing buildings is to reduce energy use while securing indoor environmental quality conducive to human health and productivity. However, existing frameworks for identifying Key Performance Indicators ( ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Metal Catalysts for the Electrochemical Reduction of CO2

Cedric David Koolen

The world by and large has adopted the The Paris Agreement, which commits any signing party to cut greenhouse emissions drastically and prevent global heating above 2 °C beyond pre-industrial levels. For this ambitious goal to be met, ratifying states need ...

EPFL2023

Decision support for the design of integrated biorefineries

Julia Granacher

A shift from fossil-based energy and products to more sustainable alternatives is essential to reduce greenhouse gas emissions and associated climate change impacts. Biomass represents a promising alternative for providing fuels and carbon-based products w ...

EPFL2023

Comparative Exergy and Economic Assessment of Fossil and Biomass-Based Routes for Ammonia Production

François Maréchal, Daniel Alexander Florez Orrego

Due to the increasing concerns about the marked dependence on fossil resources and their intrinsic economic uncertainty, as well as motivated by more stringent environmental regulations, the pursuit of alternative energy resources for the synthetic fertili ...

Silesian University of Technology2023

DIET Controller: Dynamic Indoor Environment using Deep Reinforcement Learning

Arnab Chatterjee

Heating, Ventilation, and Air Conditioning (HVAC) Systems utilize much energy, accounting for 40% of total building energy use. The temperatures in buildings are commonly held within narrow limits, leading to higher energy use. Measurements from office bui ...

EPFL2023

Enabling renewable Europe through optimal design and operation

Alessio Santecchia

Europe is currently transitioning from fossil energy sources to renewable generation of electric power. Although fundamental to reach net-zero targets, intermittent renewables are disrupting conventional methods used in operational planning and design of p ...

EPFL2022

On the scale dependence in the dynamics of frictional rupture: Constant fracture energy versus size-dependent breakdown work

Marie Estelle Solange Violay, François Xavier Thibault Passelègue, Fabian Barras, Mathias Alexandre David Lebihain, Federica Paglialunga

Potential energy stored during the inter-seismic period by tectonic loading around faults is released during earthquakes as radiated energy, frictional dissipation and fracture energy. The latter is of first importance since it is expected to control the n ...

2022

Drops: Controlled crystallization of organic crystals and their use as matrix materials for encapsulation of volatiles

Aysu Ceren Okur

Encapsulation techniques open up new possibilities to control the kinetics and location of the release of active ingredients. Despite the progresses achieved to obtain a better control over the dimensions and composition of the capsules, the encapsulation ...

EPFL2022

Multi-Scale Study of High-Temperature Latent Heat Storage With Metallic Phase Change Materials

Nithin Mallya

Energy storage is a central issue in the green economy with half the global end energy usage being heat. Latent heat thermal energy storage (LHTES) provides an energy dense heat storage solution with a well-defined discharge temperature. Utilizing low-cost ...

EPFL2022