Publications related to Radon Investigation in 650 Energy Efficient Dwellings in Western Switzerland: Impact of Energy Renovation and Building Characteristics

Related publications (28)

Cryogenic Operation of Silicon Photomultiplier Arrays

Olivier Schneider, Guido Haefeli, Frédéric Blanc, Lesya Shchutska, Federico Ronchetti, Radoslav Marchevski, Gianluca Zunica, Esteban Curras Rivera

The LHCb experiment at CERN has been upgraded for the Run 3 operation of the Large Hadron Collider (LHC). A new concept of tracking detector based on Scintillating Fibres (SciFi) read out with multichannel silicon photomultipliers (SiPMs) was installed dur ...

IOP Publishing Ltd2025

What is NExT? A new conceptual model for comfort, satisfaction, health, and well-being in buildings

Dusan Licina

Buildings are designed to respond to functional and regulatory needs, providing comfortable conditions to occupants, offering satisfactory environmental settings, minimising health risks, and enhancing individual and collective quality of life. Although th ...

Pergamon-Elsevier Science Ltd2024

The role of spatial epidemiology to support public health policies : case studies applied to health promotion, noncommunicable and infectious diseases in the canton of Vaud, Switzerland

Anaïs Laurence Ladoy

In a context of escalating public health challenges, including the rise of chronic diseases, the impact of climate change, and the COVID-19 pandemic, certain populations bear a disproportionate burden. As a result, there is an urgent need to develop public ...

EPFL2024

Performance evaluation of radon active sensors and passive dosimeters at low and high radon concentrations

Dusan Licina, Joan Frédéric Rey

Radon is a naturally occurring radioactive gas that has the potential to accumulate in buildings and over time, causes lung cancer in humans. Present methods for radon measurements are disparate, which pose challenges to benchmark radon concentrations and ...

Pergamon-Elsevier Science Ltd2024

Solar-assisted clean steam generator, a cleaner production approach for sustainable healthcare facilities

Mohammad Jamshidmofid, Fernando Porté Agel

Healthcare sector buildings, particularly hospitals, significantly contribute to global energy consumption and greenhouse gas emissions. Hospitals require a substantial amount of steam, including the essential hygienic or " clean steam, " that is currently ...

Elsevier Sci Ltd2024

Electrical and Optical Manifestations of Flat Band Physics in Van der Waals Materials

Gabriele Pasquale

The scientific progress is significantly transforming contemporary society with the introduction and widespread application of technologies like artificial intelligence and quantum computing. Despite their profound impact, these technologies necessitate en ...

EPFL2024

Soft Robotics: A Route to Equality, Diversity, and Inclusivity in Robotics

Josephine Anna Eleanor Hughes

Robotics is entering our daily lives. The discipline is increasingly crucial in fields such as agriculture, medicine, and rescue operations, impacting our food, health, and planet. At the same time, it is becoming evident that robotic research must embrace ...

Mary Ann Liebert, Inc2024

Fusing Pre-existing Knowledge and Machine Learning for Enhanced Building Thermal Modeling and Control

Loris Di Natale

Buildings play a pivotal role in the ongoing worldwide energy transition, accounting for 30% of the global energy consumption. With traditional engineering solutions reaching their limits to tackle such large-scale problems, data-driven methods and Machine ...

EPFL2024

Simultaneous Irradiation and Testing for Radiation Damage Evaluation in Actively Biased SiPMs and Other Devices

Chiara Perrina, Jennifer Maria Frieden

A portable opto-electronic device test bench together with a neutron irradiation setup at Reactor Argentino 1 (RA-1) facility in Buenos Aires (Argentina) is presented. The irradiation with neutrons is performed to reproduce the expected damage the devices ...

Institute of Electrical and Electronics Engineers Inc.2024

Self-catalysed frontal polymerisation enables fast and low-energy processing of fibre reinforced polymer composites

Véronique Michaud, Baris Çaglar, Jacobus Gerardus Rudolph Staal

Frontal polymerisation has the potential to bring unprecedented reductions in energy demand and process time to produce fibre reinforced polymer composites. Production of epoxy-based fibre reinforced polymer parts with high fibre volume content, commonly e ...

2024

Correlating long-term performance and aging behaviour of building integrated PV modules

Christophe Ballif, Alessandro Francesco Aldo Virtuani, Ebrar Özkalay

Because building-integrated photovoltaic (BIPV) modules are fully integrated into a building envelope, the back of the module can be exposed to little or no ventilation, resulting in increased operating temperatures. As the temperature increases, the perfo ...

Elsevier Science Sa2024

In-Sensor Passive Speech Classification with Phononic Metamaterials

Luis Guillermo Villanueva Torrijo, Daniel Moreno Garcia

Mitigating the energy requirements of artificial intelligence requires novel physical substrates for computation. Phononic metamaterials have vanishingly low power dissipation and hence are a prime candidate for green, always-on computers. However, their u ...

Wiley-V C H Verlag Gmbh2024

Beyond the average consumer: Mapping the potential of demand-side management among patterns of appliance usage

Selin Yilmaz, Claudia Rebeca Binder Signer, Matteo Barsanti

To support the decarbonisation of the power sector and offset the volatility of a system with high levels of renewables, there is growing interest in residential Demand-Side Management (DSM) solutions. Traditional DSM strategies require consumers to active ...

2024

A state-of-the-art, systematic review of indoor environmental quality studies in work-from-home settings

Giorgia Chinazzo, Sarah Wael Ahmed Crosby

The COVID-19 pandemic has led to a significant increase in working from home worldwide, making the workfrom-home (WFH) setting a crucial context for studying the influence of indoor environmental quality (IEQ) on workers' well-being and productivity. A nar ...

Pergamon-Elsevier Science Ltd2024

An explorative method to support design decisions based on carbon constraints and daylight sufficiency needs

Nazanin Rezaei Oghazi

The global construction industry contributes to 37% of carbon emissions associated to both building operations and construction. To help achieve the net-zero targets set by 2050, it is mandated to achieve a 50% reduction in carbon emissions by 2030. As we ...

EPFL2024

Renewable energy integration and waste heat valorization in aluminum remelting for co-producing kerosene and methanol

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...

Associazione Italiana Di Ingegneria Chimica2024

Climate risk assessment of buildings: An analysis of operating emissions of commercial offices in Australia

Arianna Brambilla, Kun Lyu

Building climate risk assessment involves benchmarking a building's energy use intensity against decarbonisation pathways to mitigate the impacts on climate change. Various climate risk assessment tools and frameworks are used for commercial buildings in d ...

Elsevier Science Sa2024

Waterborne Virus Transport and Risk Assessment in Lake Geneva Under Climate Change

Tamar Kohn, Chaojie Li

Climate changes influence lake hydrodynamics and radiation levels and thus may affect the fate and transport of waterborne pathogens in lakes. This study examines the impact of climate change on the fate, transport, and associated risks of four waterborne ...

2024

Spatial Modeling for Building Design Evaluation: from Visual Landscape Quality Assessment to Devaluation Risk Estimation

Adam Robert Swietek

Zoning reform is a crucial tool for cities to adapt to contemporary challenges. However, its implementation remains challenging. Property owners, with a vested interest in the value of their neighborhoods, are sensitive to local developments and the potent ...

EPFL2024

Exploring High-Performance and Energy-Efficient Architectures for Edge AI-Enabled Applications

Joshua Alexander Harrison Klein

The desire and ability to place AI-enabled applications on the edge has grown significantly in recent years. However, the compute-, area-, and power-constrained nature of edge devices are stressed by the needs of the AI-enabled applications, due to a gener ...

EPFL2024