Proposed Panel Zone Model for Seismic Design of Steel Moment-Resisting Frames

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

The use of steel fibre reinforced concrete (SFRC) is a well-known method for enhancing the punching and flexural resistances of flat slabs. The structural performance of SFRC elements depends significantly on the fibre distribution and orientation, which a ...

The construction sector is the largest consumer of non-renewable resources and the most significant contributor to CO2 emissions. Reusing entire components or reclaiming their constituent parts, instead of recycling structural elements at the material leve ...

Due to the significant shear forces developing around columns and the potential brittle failure associated, the punching capacity of flat slabs is the main concern at ultimate limit state. An effective way to understand the behaviour of slab-column connect ...

The strength of the interface between iron (Fe) and individual spherical silica (SiO2) inclusions of 5 +/- 1 mu m diameter is measured by means of in-situ micro-cantilever bending tests conducted under displacement control within a scanning electron micros ...

In this paper we demonstrate how the use of frequencies ranging from 50 kHz to 5 GHz in the analysis of cells by electrorotation can open the path to the identification of differences not detectable by conventional set-ups. Earlier works usually reported e ...

The usage of microfluidics for automated and fast immunoassays has gained a lot of interest in the last decades. This integration comes with certain challenges, like the reconciliation of laminar flow patterns of micro-scale systems with diffusion-limited ...

Superconducting resonators are widely used in fields spanning from quantum computing to electron spin resonance (ESR) spectroscopy. With the goal of realizing superconducting resonators, a broad variety and combination of superconducting materials, substra ...

The shear resistance of headed studs is of paramount importance for the design of steel-concrete composite structures and an accurate predictive model is highly needed. Ensemble learning is expected to be a powerful solution while it relies on laborious se ...

We present a numerical assessment of the thermal-hydraulic performance of the NbTi bus bars designed for the European DEMO. We consider the CS, TF and PF bus bars, as well as two alternative TF options for high-current operations. The main sources of stati ...

This paper demonstrates the capability of locally resonant metamaterials (LRMs) for creating compact metallic waveguide E- and H-bends, which are simultaneously working as bandpass filters. For creating these bent meta-filters, we use composite pin-pipe wa ...

Methane (CH4) has the prospective of becoming one of the major energy carriers for heavy-duty mobility, but its catalytic abatement remains a challenge. CH4 abatement reaction pathways were analyzed using targeted periodic lean/rich oscillations, which res ...

We present the deep self-correlation (DSC) descriptor for establishing dense correspondences between images taken under different imaging modalities, such as different spectral ranges or lighting conditions. We encode local self-similar structure in a pyra ...

In recent years, numerous measurement techniques have been employed to characterize surface textures in the micrometer and nanometer range. Although these techniques have enabled significant advances in surface metrology, larger surface details are not eas ...

This study focuses on the effects of ozonation on the optical and photochemical properties of dissolved organic matter (DOM). Upon ozonation, a decrease in light absorption properties of DOM was observed concomitantly with a large increase in singlet oxyge ...

Personalizing behavior change (BC) strategies to motivate increased physical activity is especially important for the diverse older adult population. However, there is a lack of knowledge about how to profile older users to most effectively personalize BC ...

Although alterations in bone mineral density (BMD) at the proximal tibia have been suggested to play a role in various musculoskeletal conditions, their pathophysiological implications and their value as markers for diagnosis remain unclear. Improving our ...

In this work we report the fabrication, characterization and validation of a cortisol biosensor, together with a unified predictive calibrated model. We demonstrated the possibility of using a classical submicron semiconductor FET as the transducer for a c ...

Heterostructured composites with an excellent photocatalytic activity have attracted increasing attention because of their great application in environmental remediation. Herein, a MIL-101(Fe)/g-C3N4 heterojunction was synthesized via in-situ growth of MIL ...

We present a computational screening of experimental structural repositories for fast Li-ion conductors, with the goal of finding new candidate materials for application as solid-state electrolytes in next-generation batteries. We start from similar to 140 ...

Proposed Panel Zone Model for Seismic Design of Steel Moment-Resisting Frames

Chat with Graph Search

Fibre orientation in SFRC slabs and consequences for punching shear and flexural resistance

Masonry walls from reclaimed concrete demolition waste

Punching tests on edge slab-column connections with refined measurements

Room-temperature strength of the interfacial bond between silica inclusions and iron

Use of high frequency electrorotation to identify cytoplasmic changes in cells non-disruptively

Acoustofluidic large-scale mixing for enhanced microfluidic immunostaining for tissue diagnostics

Fabrication and characterization of NbTi microwave superconducting resonators

Auto-tuning ensemble models for estimating shear resistance of headed studs in concrete

New Network Architectures, Protocols, And Algorithms For Time-Sensitive Applications

Assessment of the Thermal-Hydraulic Performance of the European DEMO NbTi Bus Bars

Ultra-Small Bent Meta-Waveguide Filters

Experimental and modeling-based analysis of reaction pathways on catalysts for natural gas engines under periodic lean/rich oscillations

Dense Cross-Modal Correspondence Estimation With the Deep Self-Correlation Descriptor

FBG Tactile Sensor for Surface Thickness and Shape Measurement

Optical properties and photochemical production of hydroxyl radical and singlet oxygen after ozonation of dissolved organic matter

Identifying a Motivational Profile for Older Adults Towards Increased Physical Activity

A Registration Method for Three-Dimensional Analysis of Bone Mineral Density in the Proximal Tibia

Extended-Gate FET cortisol sensor for stress disorders based on aptamers-decorated graphene electrode: Fabrication, Experiments and Unified Analog Predictive Modeling

MIL-101(Fe)/g-C3N4 for enhanced visible-light-driven photocatalysis toward simultaneous reduction of Cr(VI) and oxidation of bisphenol A in aqueous media

High-throughput computational screening for solid-state Li-ion conductors