Publications related to Prediction model for color separation, calibration and control of printers

Related publications (28)

3D Printing of Customizable Transient Bioelectronics and Sensors

Transient electronics have emerged as a new category of devices that can degrade after their functional lifetime, offering tremendous potential as disposable sensors, actuators, wearables, and implants. Additive manufacturing methods represent a promising ...

2024

Photothermal spectroscopy on-chip sensor for the measurement of a PMMA film using a silicon nitride micro-ring resonator and an external cavity quantum cascade laser

Simone Iadanza

Laser-based mid-infrared (mid-IR) photothermal spectroscopy (PTS) represents a selective, fast, and sensitive analytical technique. Recent developments in laser design permits the coverage of wider spectral regions in combination with higher power, enablin ...

Walter De Gruyter Gmbh2024

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

A Sprayable Electrically Conductive Edible Coating for Piezoresistive Strain Sensing

Dario Floreano, Bokeon Kwak

Edible electronics leverages the electronic properties of food-derived materials to deliver safer technologies that can be degraded (or digested) in the environment (or body) at the end-of-life. Sensors will be central to future smart edible robots, and ed ...

Wiley2024

Accurate color characterization of solar photovoltaic modules for building integration

Christophe Ballif, Antonin Faes, Alessandro Francesco Aldo Virtuani, Jordi Escarre Palou, Alejandro Borja Block

Accurate and reproducible color characterization is essential for colored building integrated photovoltaic products, both for manufacturing quality control and assessing long-term color stability. However, existing characterization techniques struggle to a ...

Pergamon-Elsevier Science Ltd2023

The physics of 3D printing with light

Christophe Moser

The goal of 3D printing is to realize complex 3D structures by locally adding material in small volume elements called voxels - in contrast to successively subtracting material by etching, milling or machining. This field started with optics-based proposal ...

Nature Portfolio2023

Functional Ink Formulation for Printing and Coating of Graphene and Other 2D Materials: Challenges and Solutions

Frank Nüesch, Jakob Heier, Sina Abdolhosseinzadeh, Mohammad Jafarpour

The properties of 2D materials are unparalleled when compared to their 3D counterparts; many of these properties are a consequence of their size reduction to only a couple of atomic layers. Metallic, semiconducting, and insulating types can be found and fo ...

WILEY2022

The Height of Chitinous Ridges Alone Produces the Entire Structural Color Palette

Hemant Kumar Raut

The colorful wings of butterflies result from the interaction between light and the intricate chitinous nanostructures on butterflies’ scales. This study demonstrates that just by reproducing the chitinous ridges present in butterfly scales (i.e., without ...

2022

WikiArtVectors: Style and Color Representations of Artworks for Cultural Analysis via Information Theoretic Measures

Bhargav Srinivasa Desikan

With the increase in massive digitized datasets of cultural artefacts, social and cultural scientists have an unprecedented opportunity for the discovery and expansion of cultural theory. The WikiArt dataset is one such example, with over 250,000 high qual ...

MDPI2022

Fabrication of zipping electrostatic actuators incorporating inkjet-printed layers

Herbert Shea, Samuel Rosset, Giulio Grasso

Zipping electrostatic actuators operate by bending flexible electrodes using electrostatic forces. This principle allows the use of a wide range of dielectric and conductive materials. Additive Manufacturing (AM) techniques can be used to fabricate these a ...

SPIE-INT SOC OPTICAL ENGINEERING2021

Inkjet-printed polymer composites for the detection of volatile organic compounds

Mohammadmahdi Kiaee

Sensors capable of detecting and classifying volatile organic compounds (VOC) have been gaining more attention by the advent of internet-of-things (IoT) enabled devices and integration of various sensing elements into hand-held and portable devices. The re ...

EPFL2021

2D Material Based Inks For Room Temperature Printed Electronics

Sina Abdolhosseinzadeh

Functional printing is a versatile mass production method that has gained considerable scientific and industrial attention in the past few years. A wide range of electronics from passive circuit components (e.g., resistors and interconnects) to high-perfor ...

EPFL2021

A data-driven perspective on the colours of metal-organic frameworks

Berend Smit, Luc Patiny, Mehrdad Asgari, Seyedmohamad Moosavi, Kevin Maik Jablonka, Christopher Patrick Ireland

Colour is at the core of chemistry and has been fascinating humans since ancient times. It is also a key descriptor of optoelectronic properties of materials and is often used to assess the success of a synthesis. However, predicting the colour of a materi ...

2021

Printing of NiO-YSZ nanocomposites: from continuous synthesis to inkjet deposition

Andreas Stephan Lesch, Victor Costa Bassetto

Water-based inks, containing nanometric NiO and YSZ particles in 66/34 vol. % ratio, are produced by colloidal stabilization of a binary dispersion obtained via continuous hydrothermal synthesis at supercritical conditions, i.e. 280 bar and 400 °C. The met ...

2019

Context-based Quality of Experience in Immersive Multimedia

Anne-Flore Nicole Marie Perrin

Since 1895, when the Lumière brothers came out with the projected cinematograph, motion pictures and more generally multimedia contents have considerably improved and are still experiencing a very dynamic development. Advances involved improving various mo ...

EPFL2019

Angular Color Prediction Model for Anisotropic Halftone Prints on a Metallic Substrate

Roger Hersch, Lin Yang, Petar Pjanic

Under specular reflection, non-isotropic halftones such as line halftones printed on an ink-receiving plastic layer superposed with a metallic layer change their colors upon in-plane rotation of the print. This color change is due to the orientation-depend ...

I S & T-SOC IMAGING SCIENCE TECHNOLOGY2019

Inkjet‐Printed Composites for Room‐Temperature VOC Sensing: From Ink Formulation to Sensor Characterization

Jürgen Brugger, Thomas Maeder, Mohammadmahdi Kiaee

The authors report the fabrication and characterization of chemiresistive sensors, composed of a thermoplastic elastomer (TPE), styrene‐ethylene‐ran‐butylene‐styrene, and a high‐structure carbon black (CB) targeted for detecting hydrocarbons at or near roo ...

Wiley2020

Print-Light-Synthesis of Platinum Nanostructured Indium-Tin-Oxide Electrodes for Energy Research

Andreas Stephan Lesch

Print-light-synthesis is a new concept for the large-scale in situ fabrication of nanoparticles and structures on large substrates. Here, Pt nanoparticles are synthesized on indium tin oxide (ITO) coated glass slides by using combined inkjet printing and p ...

Wiley2018

Assembling Ni-Fe Layered Double Hydroxide 2D Thin Films for Oxygen Evolution Electrodes

Hubert Girault, Andreas Stephan Lesch, Victor Costa Bassetto

Continuous hydrothermal flow synthesis (CHFS) of Ni-Fe layered double hydroxide (LDH) leads to waterborne dispersions of 2D nanoplatelets in the range of 10-50 nm in lateral size. Conversion of the as-synthesized LDH nanoplatelet dispersion into inkjet pri ...

AMER CHEMICAL SOC2020

Rapid inkjet printing of high catalytic activity Co3O4 /N-rGO layers for oxygen reduction reaction

Hubert Girault, Emad Oveisi, Andreas Stephan Lesch, Véronique Amstutz, Victor Costa Bassetto

The accurate and reproducible large-scale production of catalyst layers containing low-cost, abundant electrocatalysts gains in importance. Herein, pivotal factors are discussed that need to be considered when a combined inkjet printing and photonic curing ...

2018