Direct gyrokinetic comparison of pedestal transport in JET with carbon and ITER-like walls

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Exhausting power from the hot fusion core to the plasma-facing components is one fusion energy's biggest challenges. The MAST Upgrade tokamak uniquely integrates strong containment of neutrals within the exhaust area (divertor) with extreme divertor shapin ...

The SPC team has proposed a design for the Toroidal Field (TF) coil of the DEMO tokamak based on the use of react & wind (R&W) Nb3Sn superconductor. Thanks to the grading of both the superconductor and the steel in the jackets the size of the TF coil was c ...

In this work, a tool to design district heating networks (DHN) is presented and applied to the city of Lausanne as a case study. The evaluation of the buildings’ heat/cooling demand is performed using a Geographic Information System (GIS) database, built f ...

Water can be vitrified if it is cooled at high rates, which makes it possible to outrun crystallization in so-called no man’s land, a range of deeply supercooled temperatures where water crystallizes rapidly. Here, we study the reverse process in pure wate ...

Water vitrifies if cooled at rates above 3 × 105 K/s. In contrast, when the resulting amorphous ice is flash heated, crystallization occurs even at a more than 10 times higher heating rate, as we have recently shown. This may present an issue for microseco ...

The transition towards clean renewable energy sources, where wind and solar are prone to variation, requires adequate energy storage. Power-to-methane (PtM) systems can be part of the solution. Specifically, solid-oxide-electrolyser (SOE) based PtM systems ...

The vast amount of computational studies on electrical conduction in solid-state electrolytes is not mirrored by comparable efforts addressing thermal conduction, which has been scarcely investigated despite its relevance to thermal management and (over)he ...

Plasma turbulence plays a fundamental role in determining the performances of magnetic confinement fusion devices, such as tokamaks. Advances in computer science, combined with the development of efficient physical models, have significantly improved our u ...

Rapid inter-discharge simulation and optimization using the RAPTOR code have allowed the development of a reliable and reproducible early heating strategy for an advanced tokamak (AT) scenario on ASDEX Upgrade. Solving for electron heat and current diffusi ...

The official Spherical Tokamak for Energy Production mission aims to demonstrate the ability to generate net electricity from fusion with the STEP Prototype Power plant. One of the key technological and engineering challenges in fusion power plants is mana ...

The time-honored Allen -Feldman theory of heat transport in glasses is generally assumed to predict a finite value for the thermal conductivity, even if it neglects the anharmonic broadening of vibrational normal modes. We demonstrate that the harmonic app ...

The performance of magnetic confinement fusion devices, such as tokamaks, is strongly correlated to the phenomena that occur in the boundary region of the plasma core that faces the wall of the device. The dominant cross-field transport mechanisms from the ...

Using the GKEngine code which simulates an electrostatic plasma with adiabatic electron response under a sheared-slab geometry, an attempt at developing a hybrid approach between the delta-f and full-f schemes to describe plasma profiles exhibiting high fl ...

The heat flux mitigation during the thermal quench (TQ) by the shattered pellet injection (SPI) is one of the major elements of disruption mitigation strategy for ITER. It's efficiency greatly depends on the SPI and the target plasma parameters, and is ult ...

This paper discusses the development of a benign termination scenario for runaway electron (RE) beams on ASDEX Upgrade and TCV. A systematic study revealed that a low electron density (n e) companion plasma was required to achieve a large MHD instability, ...

Negative triangularity (NT) scenarios in TCV have been compared to positive triangularity (PT) scenarios using the same plasma shapes foreseen for divertor tokamak test tokamak operations. The experiments provided a NT/PT L-mode pair and a PT H-mode with d ...

Nuclear fusion presents a promising clean energy source to mitigate future energy crises, with magnetic confinement fusion well-positioned to provide a baseload scenario to power future reactors. The unmitigated power exhaust of such reactors threatens its ...

The aluminium sector relies on natural gas for the conversion of recycled scrap into new feedstock, which results in substantial atmospheric emissions. Hydric resources are also impacted, as they serve as heat sinks for the waste heat generated during the ...

L-mode negative triangularity (NT) operation is a promising alternative to the positive triangularity (PT) H-mode as a high-confinement edge localised mode-free operational regime. In this work, two TCV Ohmic L-mode core density ramps with opposite triangu ...

In this paper, we consider experimental data available for graphene-based nanolubricants to evaluate their convective heat transfer performance by means of computational fluid dynamics (CFD) simulations. Single-phase models with temperature-dependent prope ...

Direct gyrokinetic comparison of pedestal transport in JET with carbon and ITER-like walls

Chat with Graph Search

Divertor Shaping with Neutral Baffling as a Solution to the Tokamak Power Exhaust Challenge

3D modelling of the R&W TF coil design for EU-DEMO including the winding pack and frictional effects

Decomposition method to evaluate district heating/cooling network potential at urban scale

Flash Melting Amorphous Ice

Shaped Laser Pulses for Microsecond Time-Resolved Cryo-EM: Outrunning Crystallization during Flash Melting

Design and assessment of an evaporating water-cooled methanation reactor for a SOE-based power-to-methane system

Thermal conductivity of Li 3 PS 4 solid electrolytes with ab initio accuracy

Nonlinear simulation of plasma turbulence using a gyrokinetic moment-based approach

Inter-discharge optimization for fast, reliable access to ASDEX Upgrade advanced tokamak scenario

Models implemented in the methodological approach to design the initial STEP first wall contour

Unearthing the foundational role of anharmonicity in heat transport in glasses

Divertor turbulence characterisation using Gas Puff Imaging in the TCV tokamak

Gyrokinetic simulations of turbulence in magnetic fusion plasmas using a delta-f PIC scheme with evolving background

Plasmoid drift and first wall heat deposition during ITER H-mode dual-SPIs in JOREK simulations

Benign termination of runaway electron beams on ASDEX Upgrade and TCV

Experiments and gyrokinetic simulations of TCV plasmas with negative triangularity in view of DTT operations

Experimental study and interpretative modelling of the Power Exhaust in Configurations with Multiple X-Points in TCV

Renewable energy integration and waste heat valorization in aluminum remelting for co-producing kerosene and methanol

Modelling of power exhaust in TCV positive and negative triangularity L-mode plasmas

Computational fluid dynamics simulations of the heat transfer properties of graphene-based nanolubricants and application to hydrodynamic lubrication