Publications related to Fully Reconfigurable Coupled-Resonator Optical Waveguides (CROWs) with 10 nW Static Power MEMS

Related publications (29)

Emergent nonlinear dynamics in photonic lattices

Since the discovery of dissipative Kerr solitons in optical microresonators, significant progress has been made in the understanding of the underlying physical principles from the fundamental side and generation of broadband coherent optical Kerr frequency ...

EPFL2024

All-Dielectric Nanophotonic via Glass Fluid Instabilities

Pierre-Luc Eloi Piveteau

In this thesis work, we propose to exploit an innovative micro/nano-fabrication process, based on controlled fluid instabilities of a thin viscous film of chalcogenide glass. Amorphous selenium and arsenic triselenide were used in this thesis work, and com ...

EPFL2024

Resonators with tailored optical path by cascaded-mode conversions

Ileana-Cristina Benea-Chelmus

Optical resonators enable the generation, manipulation, and storage of electromagnetic waves. The physics underlying their operation is determined by the interference of electromagnetic waves, giving rise to the resonance spectrum. This mechanism causes th ...

Nature Portfolio2023

Cavity-Mediated Coupling of Terahertz Antiferromagnetic Resonators

Jean-Philippe Ansermet, Marcin Bialek

Coupling of space-separated resonators is interesting for quantum and communication technologies. In this work, we show that antiferromagnetic resonance in separated parallel-plane slabs of hematite (alpha-Fe2O3) couple cooperatively to terahertz electroma ...

American Physical Society (APS)2023

4-Port Microstrip planar resonator for multiband microwave material characterization applications

Anja Skrivervik, Sujith Raman

Planar microstrip resonators suitable for material characterization application are presented in this paper. The prototype consists of three resonators fed through four ports in a planar dielectric substrate without any additional resonators. The resonator ...

IEEE2022

Development of Thin Film Lithium Niobate Shear Bulk Acoustic Wave Resonators

Soumya Yandrapalli

RF MEMS piezoelectric acoustic resonators are the essential building blocks for RF filters used in RF front-end modules for wireless mobile communication due to their compact size in the MHz-GHz frequency range, high Quality factors and large relative band ...

EPFL2022

PID-like active impedance control for electroacoustic resonators to design tunable single-degree-of-freedom sound absorbers

Hervé Lissek, Maxime Volery, Xinxin Guo

Sound absorption at low frequencies still remains a challenge in both scientific research and engineering practice. Natural porous materials are ineffective in this frequency range, as well as acoustic resonators which present too narrow bandwidth of absor ...

2022

Ultra-Small Bent Meta-Waveguide Filters

Romain Christophe Rémy Fleury, Maliheh Khatibi Moghaddam

This paper demonstrates the capability of locally resonant metamaterials (LRMs) for creating compact metallic waveguide E- and H-bends, which are simultaneously working as bandpass filters. For creating these bent meta-filters, we use composite pin-pipe wa ...

IEEE2022

Unconventional time-bandwidth performance of resonant cavities with nonreciprocal coupling

Camille Sophie Brès, Davide Grassani, Kosmas Tsakmakidis, Ivan Cardea

The time-bandwidth limit is a mathematical tenet that affects all reciprocal resonators, stating that the product of the spectral bandwidth that can couple into a resonant system and its characteristic energy decay time is always equal to 1. Here, we devel ...

2021

Subwavelength Metawaveguide Filters and Metaports

Romain Christophe Rémy Fleury, Maliheh Khatibi Moghaddam

This paper proposes an alternative technique for the design of miniaturized waveguide filters based on locally resonant metamaterials (LRMs). We implement ultrasmall metamaterial filters (metafilters) by exploiting a subwavelength (sub-λ) guiding mechanism ...

American Physical Society (APS)2021

Microwave or millimeter wave passive components or devices

Romain Christophe Rémy Fleury, Maliheh Khatibi Moghaddam

A passive device comprising a hollow waveguide including first and second wall structures extending in a guiding direction, an interconnecting base extending between the wall structures and an enclosure extending between the wall structures, the enclosure ...

2021

Collective dynamics in nonlinear resonators coupled in spatial and synthetic dimensions

Tobias Kippenberg, Alexey Tikan, Aleksandr Tusnin

We theoretically investigate chaotic and stable structures in coupled-resonator chains and synthetic frequency dimension influenced by Kerr nonlinearity, thereby bringing insights in the emerging field of soliton generation in chains and lattices of high-Q ...

IEEE2021

Development of Lamb wave resonators in thin film X-cut lithium niobate

Muhammad Faizan

Microelectromechanical systems (MEMS) is among the most revolutionary technologies of 21st century, with the applications ranging from industrial systems to consumer electronics. Using MEMS in battery-powered wireless devices has long been seen as the evol ...

EPFL2021

Mechanical resonators with high dissipation dilution in precision and quantum measurements

Sergey Fedorov

Position measurements of mechanical oscillators underpin experiments spanning from applied nanoscale sensing to endeavors aiming to resolve open fundamental problems of modern physics. Sufficiently precise position measurements are also used for engineerin ...

EPFL2021

Evidence of Smaller 1/F Noise in AlScN-Based Oscillators Compared to AlN-Based Oscillators

Luis Guillermo Villanueva Torrijo, Andrea Lozzi, Marco Liffredo

In this paper we investigate the direct effect of resonator quality factor (Q) on the oscillator phase noise. We use 2-port contour mode resonators (CMRs), fabricated both with aluminum nitride (AlN) and aluminum scandium nitride (AlScN), as the frequency- ...

Institute of Electrical and Electronics Engineers2020

AlN and AlScN contour mode resonators for MEMS-based RF front ends

Andrea Lozzi

Miniaturization is a simple yet very powerful concept. Applied to devices, it opens to plethora of new applications. Microelectromechanical systems (MEMS) are the result of scaling down the dimensions of devices to the micron range or the nano range (NEMS) ...

EPFL2019

Method and spectrometer apparatus for investigating an infrared absorption of a sample

Hatice Altug, Andreas Tittl, Aleksandrs Leitis

A method of investigating a sample (1) having an absorption within an infrared spectral range of interest, comprises the steps of creating measuring light (2) with a light source device (10), wherein the measuring light (2) includes wavelengths covering th ...

2019

Material Parameter Extraction for Complex AlScN Thin Film Using Dual Mode Resonators in Combination with Advanced Microstructural Analysis and Finite Element Modeling

Paul Muralt, Thomas La Grange, Vladimir Pashchenko, Fazel Parsapour, Silviu Cosmin Sandu

Accurate property determination of the piezoelectric thin film material Al(1-x)Sc(x)N is necessary for designing the next generation of radio frequency resonators in mobile communication, and for testing results of ab initio calculations. Sound velocity an ...

WILEY2019

3D printed microwave cavity for atomic clock applications: proof of concept

Anja Skrivervik, Emile Jacques de Rijk

The authors present the realisation and characterisation of an additively manufactured (AM) microwave resonator cavity for double-resonance (DR) vapour-cell atomic clocks. The design of the compact microwave cavity is based on the loop-gap resonator approa ...

2018

Micromechanical resonators with sub-micron gaps filled with high-k dielectrics

Mariazel de la Candelas Maqueda López

Scaled microelectromechanical (MEMS) resonating devices have generated a great interest for their use in RF front-end architectures for wireless communication, channel-select filters, on-chip signal processing and timing and extreme mas sensing application ...

EPFL2017