Publications related to Thermal-Aware Compilation for Register Window-Based Embedded Processors

Related publications (32)

An empirical study estimating train-induced airflow rate and its effect on the cooling load of underground stations

Train-induced airflows (TIA) have a considerable effect on the thermal environment and the cooling of underground metro stations (UMSs). However, few studies have specifically examined the relationship between the train arrival time interval and TIA's patt ...

2025

An MLIR-based Compilation Framework for CGRA Application Deployment

David Atienza Alonso, Giovanni Ansaloni, Lara Orlandic, Juan Pablo Sapriza Araujo, Yuxuan Wang, Rubén Rodríguez Álvarez

Coarse-Grained Reconfigurable Arrays (CGRAs) are a programmable architectural solution that efficiently supports the execution of computation-intensive application functions (kernels). Compilers for CGRAs typically focus on optimizing the mapping of single ...

2025

Performance of energy piles foundation in hot-dominated climate: A case study in Dubai

Lyesse Laloui, Elena Ravera, Sofie Elaine ten Bosch

Energy piles represent an innovative technology that can help provide sustainable geothermal heating or cooling energy for thermal conditioning purposes. In hot-dominated climates, the interest is to inject heat in the ground and extract energy for space-c ...

Pergamon-Elsevier Science Ltd2024

Is the powersave governor really saving power?

David Atienza Alonso, Darong Huang, Luis Maria Costero Valero

A frequency scaling governor is critical for the performance management of cloud servers, as it enhances energy efficiency and helps to control operational temperatures, thereby ensuring system reliability. However, our in-depth analysis of the application ...

2024

Design and assessment of an evaporating water-cooled methanation reactor for a SOE-based power-to-methane system

Philippe Aubin

The transition towards clean renewable energy sources, where wind and solar are prone to variation, requires adequate energy storage. Power-to-methane (PtM) systems can be part of the solution. Specifically, solid-oxide-electrolyser (SOE) based PtM systems ...

EPFL2024

Modeling and optimization of PCB coils for inductive power transfer systems

Xiaotong Du

The auxiliary power supply for medium voltage converters requires high insulation capability between the source and the load. Inductive power transfer technology, with an air gap between the primary and secondary coil, offers such high insulation capabilit ...

EPFL2024

Room-temperature quantum optomechanics using an ultralow noise cavity

Tobias Kippenberg, Guanhao Huang, Nils Johan Engelsen, Alberto Beccari

At room temperature, mechanical motion driven by the quantum backaction of light has been observed only in pioneering experiments in which an optical restoring force controls the oscillator stiffness1,2. For solid-state mechanical resonators in which oscil ...

Nature Portfolio2024

EdgeAI-Aware Design of In-Memory Computing Architectures

Marco Antonio Rios

Driven by the demand for real-time processing and the need to minimize latency in AI algorithms, edge computing has experienced remarkable progress. Decision-making AI applications stand out for their heavy reliance on data-centric operations, predominantl ...

EPFL2024

Flash Melting Amorphous Ice

Marcel Drabbels, Ulrich Lorenz, Gabriele Bongiovanni, Constantin Richard Krüger, Nathan Junior Mowry

Water can be vitrified if it is cooled at high rates, which makes it possible to outrun crystallization in so-called no man’s land, a range of deeply supercooled temperatures where water crystallizes rapidly. Here, we study the reverse process in pure wate ...

2024

Contemporary Logic Synthesis: with an Application to AQFP Circuit Optimization

Siang-Yun Lee

Electronic devices play an irreplaceable role in our lives. With the tightening time to market, exploding demand for computing power, and continuous desire for smaller, faster, less energy-consuming, and lower-cost chips, computer-aided design for electron ...

EPFL2024

Decomposition method to evaluate district heating/cooling network potential at urban scale

Ana Catarina Gouveia Braz, François Maréchal, Luc Girardin, Bingqian Liu

In this work, a tool to design district heating networks (DHN) is presented and applied to the city of Lausanne as a case study. The evaluation of the buildings’ heat/cooling demand is performed using a Geographic Information System (GIS) database, built f ...

Associazione Italiana Di Ingegneria Chimica2024

Design and in vitro Characterization of a Wearable Multisensing System for Hydration Monitoring

Ali Meimandi, Sandro Carrara, Ata Jedari Golparvar, Sarah Tonello

Dehydration is a frequent condition in the elderly and can lead to serious health complications if not compensated timely. Early diagnosis can be problematic, as medical examinations in the hospital would be needed. Fully wearable low-cost multisensing dev ...

Ieee-Inst Electrical Electronics Engineers Inc2024

200 GHz single chip microsystems for dynamic nuclear polarization enhanced NMR spectroscopy

Giovanni Boero, Nergiz Sahin Solmaz, Reza Farsi

Dynamic nuclear polarization (DNP) is one of the most powerful and versatile hyperpolarization methods to enhance nuclear magnetic resonance (NMR) signals. A major drawback of DNP is the cost and complexity of the required microwave hardware, especially at ...

Nature Research2024

MOD2IR: High-Performance Code Generation for a Biophysically Detailed Neuronal Simulation DSL

Felix Schürmann, Pramod Shivaji Kumbhar, Omar Awile, Ioannis Magkanaris, Snehal Pramod Kumbhar

Advances in computational capabilities and large volumes of experimental data have established computer simulations of brain tissue models as an important pillar in modern neuroscience. Alongside, a variety of domain specific languages (DSLs) have been dev ...

ACM2023

Interlocking modular microfluidic cooling substrates for future high energy physics experiments

Massimo Angeletti

In high energy physics, semiconductor-based sensors are widely used in particle tracking applications. These sensors are typically glued on low-mass cooling substrates, which guarantee the correct thermal management and, at the same time, minimise their in ...

EPFL2023

Advancing efficiency and reliability in thermal analysis of laser powder-bed fusion

Christian Leinenbach

In laser based powder-bed fusion of metals (PBF-LB/M), parts are fabricated by melting layers of powder using a high-intensity laser beam. During this process, the material is exposed to rapid cooling rates and intense thermal gradients, which are the unde ...

2023

Programmable Seizure Detector Using a 32-bit RISC Processor for Implantable Medical Devices

Alexandre Schmid, Keyvan Farhang Razi

A programmable patient-customized epileptic seizure detector is proposed in this paper to enable neurologists and patients to have constructive interactions with the implantable medical device. The programmability feature is enabled by designing a low-powe ...

IEEE2023

Radiation-tolerant Multichannel Dew Point Temperature Monitoring System for High Energy Physics Applications

Amar Kapic

The next generation of high-energy physics (HEP) detectors will predominantly be silicon-based. As pixel sensor technology gains momentum and the number of channels surpasses one billion (for a volume of approximately 20 m3) to achieve the high resolution ...

EPFL2023

Acceleration of Control Intensive Applications on Coarse-Grained Reconfigurable Arrays for Embedded Systems

David Atienza Alonso, Miguel Peon Quiros, Benoît Walter Denkinger

Embedded systems confront two opposite goals: low-power operation and high performance. The current trend to reach these goals is toward heterogeneous platforms, including multi-core architectures with heterogeneous cores and hardware accelerators. The lat ...

2023

Modeling and Design Optimization of Loosely Coupled PCB Spiral Coils in Inductive Power Transfer Systems

Drazen Dujic, Xiaotong Du

There are various possibilities to realize coil winding designs for an inductive power transfer system. In order to achieve high power transfer efficiency and power density and explore trade-offs between the two, design optimization around the coil link is ...

2023