Publications related to Fabrication of sub-10 nm gap arrays over large areas for plasmonic sensors

Related publications (26)

Plasmonic Nanostructures for Photocatalysis: Material, Photonic and Electronic Effects

Plasmonic photochemistry has a large potential to replace energy-intensive chemical processes with low-temperature, low-pressure light-driven chemical reactions. Plasmonic nanostructures have emerged as promising photocatalysts with exceptional and tunable ...

EPFL2024

Advanced Silicon and SWIR Single-Photon Avalanche Diodes: Design, Simulation, and Characterization

Ekin Kizilkan

Low-level light detection with high spatial and timing accuracy is a growing area of interest by virtue of applications such as light detection and ranging (LiDAR), biomedical imaging, time-resolved Raman spectroscopy, and quantum applications. Single-phot ...

EPFL2024

Growth and Doping Mechanisms of III-V Nanostructures by Selective Area Epitaxy

Didem Dede

Selective area epitaxy (SAE), applied to semiconductor growth, allows tailored fabrication of intricate structures at the nanoscale with enhanced properties and functionalities. In the field of nanowires (NWs), it adds scalability by enabling the fabricati ...

EPFL2024

Laser-Induced Forward Transfer of Functional Microdevices

Zhiwei Yang

Laser-induced forward transfer (LIFT) technique is an emerging micro additive manufacturing (AM) technique that has been widely used to print a variety of materials. Distinguished from other nozzle-based AM techniques, LIFT operates without the existence o ...

EPFL2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Ambrine Douhane, Marcus Cemes, Duccio Testa

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Selectively Exciting and Probing Radiative Plasmon Modes on Short Gold Nanorods by Scanning Tunneling Microscope-Induced Light Emission

Olivier Martin

We study the plasmon modes of gold nanorods (as short as similar to 100 nm) on a nonmetallic conductive substrate using scanning tunneling microscope-induced light emission (STM-LE) with a nonplasmonic tungsten tip at room temperature in high vacuum (10-7 ...

AMER CHEMICAL SOC2023

Optical manipulation of plasmonic nanoparticles: Applications in surface chemistry and nano-optics

Jeonghyeon Kim

Optical tweezers are devices that can manipulate nano- and microparticles using a laser. The principle of optical tweezers is to apply a force to an object using the momentum of light. This force is very small, but it is sufficient to move things in the mi ...

EPFL2023

REMOTE: Re-thinking Task Mapping on Wireless 2.5D Systems-on-Package for Hotspot Removal

David Atienza Alonso, Giovanni Ansaloni, Marina Zapater Sancho, Darong Huang, Rafael Medina Morillas

2.5D Systems-on-Package (SoPs) are composed by several chiplets placed on an interposer. They are becoming increasingly popular as they enable easy integration of electronic components in the same package and high fabrication yields. Nevertheless, they int ...

2023

Scalable fabrication of functional nanostructures on stretchable substrates by capillary-assisted particle assembly and adhesion lithography

Henry Shao-Chi Yu

The fabrication of metallic nanostructures on stretchable substrates enables specific applications that exploit the combination of the nano-scale phenomena and the mechanical tunability of the physical dimensions of the nanostructures. Due to the large dif ...

EPFL2022

Ultra low quantum decoherence nano-optomechanical systems

Mohammadjafar Bereyhi

Thermal motion of a room-temperature mechanical resonator typically dominates the quantum backaction of its position measurement. This is a longstanding barrier for exploring cavity optomechanics at room temperature. In order to enter the quantum regime of ...

EPFL2022

A new versatile hybrid MEMS technology for high sensitivity, fluid proof sensing applications

Matthias Neuenschwander

The field of micro electromechanical systems (MEMS) evolved from the microelectronic industry and the technologies developed to fabricate integrated circuits. As a result, MEMS are commonly fabricated on silicon wafers. The development of MEMS has been dri ...

EPFL2022

Synthesis and properties of heterostructures in nanowires and 2-D materials

Akshay Balgarkashi

Modern solid-state devices were made possible by the discovery of semiconductor heterostructures. Heterostructures offer the ability to fabricate low-dimensional nanostructures such as quantum dots which can restrain carriers in all three-directions. Quant ...

EPFL2022

Controlling motion at the nanoscale with light

Mintae Chung

Optical manipulation at the micro- nano-scale is a fascinating topic due to its inherent non-invasive properties and multifaceted applications in various fields such as biology, sensing, micro-fluidics, and micro- nano-robotics. This thesis involves intens ...

EPFL2022

Edge-Contact MoS2 Transistors Fabricated Using Thermal Scanning Probe Lithography

Jürgen Brugger, Giovanni Boero, Xia Liu, Ana Conde Rubio

The science and engineering of two-dimensional materials (2DMs), in particular, of 2D semiconductors, is advancing at a thriving pace. It is well known that these delicate few-atoms thick materials can be damaged during the processing toward their integrat ...

2022

Additive manufacturing of ceramics by two-photon lithography, volumetric 3D printing and high-resolution endo-printing

Georgia Konstantinou

Additive manufacturing is a growing sector of industrial production that allows the fabrication of parts with complex geometries and reduced waste. The context of this thesis is light-based additive manufacturing technologies. In the first part of the the ...

EPFL2022

Precise Capillary‐Assisted Nanoparticle Assembly in Reusable Templates

Olivier Martin, Jürgen Brugger, Giovanni Boero, Hsiang-Chu Wang, Ana Conde Rubio, Henry Shao-Chi Yu

Capillary-assisted particle assembly (CAPA) in predefined topographical templates is a scalable method for the precise positioning of nanoscale objects on various surfaces. High-resolution CAPA templates are typically fabricated by expensive electron-beam ...

2022

A Low-Temperature Annealing Method for Alloy Nanostructures and Metasurfaces: Unlocking a Novel Degree of Freedom

Olivier Martin, Christian Santschi, Hsiang-Chu Wang, Jeonghyeon Kim, Debdatta Ray

The material and exact shape of a nanostructure determine its optical response, which is especially strong for plasmonic metals. Unfortunately, only a few plasmonic metals are available, which limits the spectral range where these strong optical effects ca ...

Wiley-V C H Verlag Gmbh2022

Photo- and Thermally- induced Effects on the Absorption Spectroscopy of Au/SiO2 and Au/TiO2 Core-shell Nanoparticles

Lijie Wang

Electrons generated by Landau damping of the plasmon excitation on gold nanoparticles that can be injected into an adjacent semiconductor e.g. anatase TiO2, enhancing the light harvesting capabilities of solar energy conversion devices. The understanding o ...

EPFL2022

Quantitative and sensitive detection of alpha fetoprotein in serum by a plasmonic sensor

Wen Chen

Quantitative molecular detection based on surface-enhanced Raman spectroscopy (SERS) is still a great challenge because of the highly nonuniform distribution of the SERS hot spots and the nondeterministic spatial and spectral overlap of the analyte with th ...

WALTER DE GRUYTER GMBH2022

Controlling surface effects in extremely high aspect ratio gold plasmonic electrodes

Olivier Martin, Christian Santschi, Marco Riccardi

Nanofabrication is key to many technological advances, especially the challenge of merging nanophotonics with electronics. Here, we investigate the fabrication process of plasmonic interdigitated gold electrodes having a very high aspect ratio (i.e. long a ...

ELSEVIER2022