Publications related to Q-Factor Bounds for Microstrip Patch Antennas

Related publications (29)

Enabling Wide Bandwidth in Substrate-Integrated Waveguide Slot Antennas by Using Low-Index Metamaterials

Romain Christophe Rémy Fleury, Amir Jafargholi

This paper presents a solution to overcome the inherently limited bandwidth of substrate-integrated waveguide (SIW) slot antennas. It is analytically shown that by decreasing the permittivity of a dielectric loaded slot antenna, the resulting bandwidth inc ...

American Physical Society (APS)2024

A mmWave Low Complexity and Low-Cost Super Wideband Dual-Polarized Aperture Coupled Antenna for 5G Applications

Anja Skrivervik

Advanced antenna system (AAS) is a viable option for 5G millimeter-wave (mmWave) applications. AAS single element is favored to be dual-polarized, wideband, high gain, and compact in order to be utilized for 5G antenna arrays. In this paper, a low complexi ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Light Emission and Conductance Fluctuations in Electrically Driven and Plasmonically Enhanced Molecular Junctions

Zhiyuan Xie, Christophe Marcel Georges Galland, Wen Chen, Sakthi Priya Amirtharaj, Konstantin Malchow

Electrically connected and plasmonically enhanced molecular junctions combine the optical functionalities of high field confinement and enhancement (cavity function), and of high radiative efficiency (antenna function) with the electrical functionalities o ...

Amer Chemical Soc2024

Technology challenges and integration of the plasma position reflectometer in RFX-mod2

Riccardo Agnello

The integration of the new plasma position reflectometer in the RFX-mod2 experiment (the upgraded version of the previous RFX-mod that operated until 2015) is presented in this contribution. Particular attention has been devoted to the high field side subs ...

Elsevier Science Sa2024

All-Dielectric Nanophotonic via Glass Fluid Instabilities

Pierre-Luc Eloi Piveteau

In this thesis work, we propose to exploit an innovative micro/nano-fabrication process, based on controlled fluid instabilities of a thin viscous film of chalcogenide glass. Amorphous selenium and arsenic triselenide were used in this thesis work, and com ...

EPFL2024

Degradable and Printed Microstrip Line for Chipless Temperature and Humidity Sensing

Danick Briand, Jaemin Kim, James Alec Pierce Bourely

Research on chipless and passive architectures for environmental sensing is generating high interest because they do not require any semiconductor components or batteries to operate, thus resulting in an eco-friendlier footprint. This study demonstrates a ...

2024

Microstrip patch antennas with broad beamwidth

Ismael Vico Triviño

Microstrip antennas offer a broad set of advantages such as low profile, light weight, easy fabrication and low cost. As these are desirable or even critical for a broad range of applications, there has been a large interest for these antennas in the anten ...

EPFL2023

Biomaterial devices on Arecanut palm leaf for microwave applications

Anja Skrivervik, Sujith Raman

This paper presents an investigation on the possibility of arecanut palm leaf as a biomaterial substrate for various microwave devices such as transmission lines, antenna, filter and a radio frequency identification device (RFID). The dielectric properties ...

IEEE2023

Toward Metantennas: Metamaterial-Based Antennas for Wireless Communications

Yuanyan Su

Antennas have historically been the most common electromagnetic (EM) technology for wireless communication systems. Antenna as hardware is entirely dependent on the EM properties of the materials used, mostly related to the permittivity and permeability. I ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Circularly polarized planar antenna with axially symmetric beamwidth reconfigurability

Anja Skrivervik, Ismael Vico Triviño, Hannes Bartle

This contribution presents the design of a compact circularly polarized antenna featuring beamwidth reconfiguration in both the horizontal and vertical planes. The observed radiation patterns in each of the reconfigurable states present axial symmetry and ...

IEEE2023

Dual-Polarized SIW Slot Antenna Using ENZ Metamaterial for 5G and mmWave Applications

Romain Christophe Rémy Fleury, Amir Jafargholi

This paper presents a broadband dual-polarized substrate integrated waveguide (SIW) slot antenna. It is analytically shown that by decreasing the permittivity of a dielectricloaded slot antenna, the resulting bandwidth increases significantly, where the wi ...

IEEE2023

Small antennas with broad beamwidth integrated on a drone enclosed in a protective structure

Anja Skrivervik, Ismael Vico Triviño

In this paper, we analyze the integration of small antennas in a drone protected by a conductive structure. They must be light and resistant to provide high collision resilience, which is critical for drones flown indoors and in complex environments. To ac ...

IEEE2023

Evaluation of a New Process for the Additive Manufacturing of Metal Antennas

German Augusto Ramirez Arroyave

This paper presents a new process for additively manufacturing purely metallic antennas based on Fused Deposition Modeling (FDM), with a proprietary filament developed using a hot extrusion method and composed by a mix of rounded shape copper powders with ...

2023

Fifth-generation fractal antenna design based on the Koch Snowflake geometry. A fractal theory application

Maria-Alexandra Paun

The projection of fifth-generation (5G) fractal antennas and their advantageous geometry are examined. The fact that fractal-shaped antennas based on Koch Snowflake geometry are suitable for higher frequencies was shown above all. By the instrumentality of ...

WILEY2023

Design Methodology for Wideband Bowtie Patch Antenna for 5G mmWave Applications

Anja Skrivervik

Millimeter wave (mmWave) frequencies has become a research area of interest in recent years because of providing broad available bandwidth and thus higher data rates. Wideband mmWave antenna is one of the important development areas in wireless communicati ...

IEEE2023

Enhancing the beamwidth of low profile single-fed microstrip antennas using parasitic elements

Anja Skrivervik, Ismael Vico Triviño

In this paper we present a technique to broaden the beamwidth of conventional patch microstrip antennas by using parasitic elements. This technique allows to keep the main advantages of microstrip antennas while increasing their beamwidth. We provide guide ...

IEEE2022

Multi-antenna 3D pattern design for millimeter-wave vehicular communications

German Augusto Ramirez Arroyave

The transformation of the automotive industry towards ubiquitous connection of vehicles with all kind of external agents (V2X) motivates the use of a wide range of frequencies for several applications. Millimeter-wave (mmWave) connectivity represents a par ...

2022

Metasurface Near-Field Measurements with Incident Field Reconstruction Using a Single Horn Antenna

Shourya Dutta Gupta, Ville Tuovi Tiukuvaara

Metasurfaces (MSs) are the 2-D equivalent of metaterials, the latter being a class of artificial engineered materials exhibiting peculiar electromagnetic properties [1], [2]. Generally constructed as arrays of deeply sub-wavelength resonant particles on a ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

4-Port Microstrip planar resonator for multiband microwave material characterization applications

Anja Skrivervik, Sujith Raman

Planar microstrip resonators suitable for material characterization application are presented in this paper. The prototype consists of three resonators fed through four ports in a planar dielectric substrate without any additional resonators. The resonator ...

IEEE2022

Development of Thin Film Lithium Niobate Shear Bulk Acoustic Wave Resonators

Soumya Yandrapalli

RF MEMS piezoelectric acoustic resonators are the essential building blocks for RF filters used in RF front-end modules for wireless mobile communication due to their compact size in the MHz-GHz frequency range, high Quality factors and large relative band ...

EPFL2022