Publications related to The ratio of shear to elastic modulus of in-plane loaded masonry (vol 53, 40, 2020)

Dataset for "Complexity of crack front geometry enhances toughness of brittle solids"

John Martin Kolinski, Chenzhuo Li, Xinyue Wei

This data package supports the publication 'Complexity of crack front geometry enhances toughness of brittle solids' by Xinyue Wei, Chenzhuo Li, Cían McCarthy, and John M. Kolinski Nature physics (2024) - https://doi.org/10.1038/s41567-024-02435-x DOI: 1 ...

Zenodo2024

Nanoindentation of embedded particles

Andreas Mortensen, Alejandra Inés Slagter, Joris Pierre Everaerts

We address the effect of elastic inhomogeneity on elastic modulus and hardness determinations made by depth-sensing indentations performed on individual particles embedded within a matrix of different elastic modulus. Finite element simulations and nanoind ...

SPRINGER HEIDELBERG2023

FIB-Fabrication of Resonating Cantilevers to Explore Symmetry-Breaking in Quantum Materials

Amelia Emily-Kay Estry

Scientific progress and technological advancements on novel materials are often deterred by limitations on size and quality of samples. Materials with electronic phenomena attractive for applications, and presenting many open scientific questions, are ofte ...

EPFL2023

On-Demand Cross-Linkable Bottlebrush Polymers for Voltage- Driven Artificial Muscles

Frank Nüesch, Francis Owusu, Yeerlan Adeli

Dielectric elastomer actuators (DEAs) generate motion resembling natural muscles in reliability, adaptability, elongation, and frequency of operation. They are highly attractive in implantable soft robots or artificial organs. However, many applications of ...

AMER CHEMICAL SOC2023

Bottlebrush Dielectric Elastomers with Improved Properties for Actuation

Yeerlan Adeli

Dielectric elastomer actuators (DEA) are elastic capacitors composed of a pair of compliant electrodes and a soft dielectric elastomer film sandwiched in between. This kind of stretchable capacitors can be actuated when charged, can generate electricity fr ...

EPFL2023

Shear strength and shear stiffness analysis of compacted Wyoming-type bentonite

Alessio Ferrari

Wyoming-type bentonite is one of the materials to be used as part of the Engineered Barrier System (EBS) in deep geological disposal facilities for the safe disposal of spent nuclear fuel.In the KBS-3 type repository, the canisters containing the spent fue ...

ELSEVIER2023

Engineering Hydrogel-coated Neural Interfaces for Chronic Deep Brain Recording

Noaf Salah Ali Alwahab

Implanted brain electrodes provide a unique way of electrically interfacing with individual neurons in vivo. However, chronic recording or stimulating capabilities of neural implants are often impaired by a strong immune response resulting in a fibrous sca ...

EPFL2023

Thermophysical and thermomechanical properties of basalt-phenolic FRP rebars under high temperature

Thomas Keller, Hongwei Zhu, Ting Li, Jiahui Shen

An experimental investigation was conducted on the thermophysical and thermomechanical properties of phenolic-basalt fiber-reinforced polymer (P-BFRP) rebars subjected to high temperature. As a comparison, vinylBFRP (V-BFRP) and epoxy-BFRP (E-BFRP) rebars ...

ELSEVIER SCI LTD2022

Stiff, Strong, Tough, and Highly Stretchable Hydrogels Based on Dual Stimuli-Responsive Semicrystalline Poly(urethane–urea) Copolymers

Pascal Alexander Schouwink, Nicolas Candau, Adrien Julien Demongeot, Oguzhan Oguz

There has been a considerable interest in developing stiff, strong, tough, and highly stretchable hydrogels in various fields of science and technology including biomedical and sensing applications. However, simultaneous optimization of stiffness, strength ...

2021

Computational micromechanics of porous brittle solids

Henning Löwe, Johan Alexandre Philippe Gaume, Lars Kristoffer Uhlen Blatny, Stephanie Wang

Porous brittle solids evidence complex mechanical behavior, where localized failure patterns originate from mechanical processes on the microstructural level. In order to investigate the failure mechanics of porous brittle solids, we outline a general stoc ...

2021

Surface modified microfibrillated cellulose‐poly(vinylidene fluoride) composites: β‐phase formation, viscoelastic and dielectric performance

Dragan Damjanovic, Yves Leterrier, Véronique Michaud, Mohammed Arif Poothanari

The effect of silylation of microfibrillated cellulose (MFC) surfaces on β‐phase formation in poly(vinylidene difluoride) (PVDF) and the resulting viscoelastic and dielectric performance of MFC‐PVDF composites is investigated. Two different organosilanes, ...

2021

Tensile response of Ultra High Performance PE Fiber Reinforced Concretes (PE-UHPFRC) under imposed shrinkage deformations

Emmanuel Denarié, Mohamed Abdul Hafiz, Amir Hajiesmaeili

PE-UHPFRC is a new Ultra High-Performance Fiber Reinforced Concrete (UHPFRC), which is developed to reduce the environmental impact of conventional UHPFRC by replacing the steel fibers with synthetic ones and reducing the clinker content in the mix. The de ...

2021

Viscoelastic behavior of suspensions of reduced graphene oxide nanoparticles in epoxy

László Forró, Yves Leterrier, Arnaud Magrez, Maryam Majidian

The viscoelastic behavior of dilute suspensions of reduced graphene oxide (RGO) nanoparticles in a liquid SU8 epoxy dissolved in gamma butyrolactone was investigated at RGO concentrations in the range from 0.16 to 1.07 vol. %. Our results revealed that the ...

AMER INST PHYSICS2021

Silk granular hydrogels self-reinforced with regenerated silk fibroin fibers

Dominique Pioletti, Pierre-Etienne Bourban, Céline Samira Wyss, Peyman Karami, Adrien Julien Demongeot

Granular hydrogels with high stability, strength, and toughness are laborious to develop. Post-curing is often employed to bind microgels chemically and enhance mechanical properties. Here a unique strategy was investigated to maintain microgels together w ...

2021

Pulsatile Flow-Induced Fatigue-Resistant Photopolymerizable Hydrogels for the Treatment of Intracranial Aneurysms

Dominique Pioletti, Andreas Schmocker, Lucio Feo Pancaldi-Giubbini, Christophe Moser, Mahmut Selman Sakar, Oriane Poupart

An alternative intracranial aneurysm embolic agent is emerging in the form of hydrogels due to their ability to be injected in liquid phase and solidify in situ. Hydrogels have the ability to fill an aneurysm sac more completely compared to solid implants ...

2021

In situ photopolymerizable hydrogels for intracranial aneurysms treatment

Oriane Poupart

Intracranial aneurysm is a cerebrovascular disease characterized by an artery dilation in the brain. An aneurysm is prone to rupture, which causes a life-threatening subarachnoid hemorrhage. The major drawbacks of the current treatments, open surgical clip ...

EPFL2021

The ratio of shear to elastic modulus of in-plane loaded masonry

Katrin Beyer, Bastian Valentin Wilding, Michele Godio

When designing unreinforced masonry buildings, the wall stiffness and, consequently, the masonry elastic and shear modulus E and G are essential parameters. Current codes provide empirical estimates of the masonry elastic modulus and a ratio between the sh ...

2020

Microstructural simulation and measurement of elastic modulus evolution of hydrating cement pastes

Cyrille Dunant, Karen Scrivener, Arnaud Müller, Arnaud Charles Albert Muller

Predicting the evolution of stiffness in cement paste requires linking morphological properties of the microstructure to the evolution of mechanical properties. Measures are typically difficult to obtain with sufficient time resolution to capture the trans ...

Pergamon-Elsevier Science Ltd2020

Influence of low curing temperatures on the tensile response of low clinker Strain Hardening UHPFRC under full restraint

Emmanuel Denarié, Mohamed Abdul Hafiz

The tensile response of strain hardening UHPFRC under full restraint, subjected to curing temperatures of 20 °C, 10 °C, 5 °C, was investigated for two types of mixes with silica fume; Mix I with pure type I cement and Mix II with 50% replacement of cement ...

Pergamon-Elsevier Science Ltd2020

Tensile response of UHPFRC under very low strain rates and low temperatures

Emmanuel Denarié, Mohamed Abdul Hafiz

This paper addresses the uniaxial tensile response of Strain Hardening Ultra High-Performance Fiber Reinforced Concretes (SH-UHPFRC) subjected to very low strain rates and low temperatures. The influence of four different strain rates; 1 × 10−5, 1 × 10−7, ...

Pergamon-Elsevier Science Ltd2020