Publications related to Evaluation of characteristic parameters for high performance hall cells

Related publications (33)

Exciton migration in two-dimensional materials

Excitons play an essential role in the optical response of two-dimensional materials. These are bound states showing up in the band gaps of many-body systems and are conceived as quasiparticles formed by an electron and a hole. By performing real-time simu ...

Nature Portfolio2024

Sensitivity Analysis of the Lumped Thermal Model of the EU 170 GHz Gyrotron Magnetron Injection Gun

Jean-Philippe Hogge, Francisco Sanchez

The ITER Electron Cyclotron Resonance Heating and Current Drive (ECRH&CD) system relies on 1 MW 170 GHz Gyrotrons to provide the mm-wave power needed for plasma heating, current drive, and magneto-hydrodynamic control. The design and modeling of the contro ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Model-based constraints for trajectory determination of quad-copters: Design, calibration & merits for direct orientation

Jan Skaloud, Davide Antonio Cucci, Kenneth Joseph Paul

This paper proposes a novel method to improve georeferencing of airborne laser scanning by improved trajectory estimation using Vehicle Dynamic Model. In Vehicle Dynamic Model (VDM), the relationship between the dynamics of the platform and control inputs ...

2023

Zn3P2 as an earth-abundant photovoltaic material: from growth to device

Rajrupa Paul

The development of cost-effective and earth-abundant semiconducting materials is imperative for the sustainable deployment of photovoltaic technology. Zinc phosphide (Zn3P2) is a promising candidate for terawatt-scale electricity generation. It has a near- ...

EPFL2023

Beam homogeneity of caesium seeded SPIDER using a direct beamlet current measurement

Basile Marie Jacques Pouradier Duteil

The ITER Heating Neutral Beam (HNB) source prototype SPIDER (Source for the Production of Ions of Deuterium Extracted from a Radio frequency plasma), hosted at the Neutral Beam Test Facility (NBTF) in Padova, Italy, has recently started operating with evap ...

ELSEVIER SCIENCE SA2023

Investigating the Effect of Crystal Morphology on Optoelectronic Properties of Zinc Phosphide Thin Films via Optical-pump Terahertz Probe Spectroscopy

Jean-Baptiste Leran, Mahdi Zamani, Simon Robert Escobar Steinvall, Elias Zsolt Stutz, Rajrupa Paul, Mirjana Dimitrievska, Léa Buswell

Zinc phosphide ( Zn3P2) is a promising earth-abundant material for solar cell applications but calls for the further understanding of its optoelectronic properties. In this work, we perform contact-free and noninvasive optical-pump terahertz probe (OPTP) s ...

IEEE2023

A Triethyleneglycol C-60 Mono-adduct Derivative for Efficient Electron Transport in Inverted Perovskite Solar Cells

Mohammad Khaja Nazeeruddin, Konstantina Kalliopi Armadorou

Inverted perovskite solar cells (PSCs) have attracted increasing attention in recent years owing to their low-temperature fabrication proces s. However, they suffer from a limited number of electron transport materials available with [6,6]-phenyl C-61 buty ...

WILEY-V C H VERLAG GMBH2023

Synthesis and Characterization of Functionalized Spacer Cations for the Incorporation in Layered Perovskites

Simon Nussbaum

Layered hybrid organic-inorganic perovskite (LHOIP) materials are an emerging class of semiconductors endorsed as a more stable alternative compared to the more widely investigated 3D hybrid organic-inorganic halide perovskites (HOIP). Consisting of altern ...

EPFL2023

Advancing efficiency and reliability in thermal analysis of laser powder-bed fusion

Christian Leinenbach

In laser based powder-bed fusion of metals (PBF-LB/M), parts are fabricated by melting layers of powder using a high-intensity laser beam. During this process, the material is exposed to rapid cooling rates and intense thermal gradients, which are the unde ...

2023

Hybridization driving distortions and multiferroicity in rare-earth nickelates

Nicola Marzari, Iurii Timrov, Michele Kotiuga, Luca Binci

For decades transition-metal oxides have generated a huge interest due to the multitude of physical phenomena they exhibit. In this class of materials, the rare-earth nickelates, RNiO3, stand out for their rich phase diagram stemming from complex couplings ...

Amer Physical Soc2023

Influence of amount of shear reinforcement and its post-yield response on the shear resistance of reinforced concrete members

Aurelio Muttoni, Miguel Fernández Ruiz, Frédéric Monney

The minimum amount of shear reinforcement to be provided in reinforced concrete members has been a topic of debate and research for decades without reaching a consensus. Defining such values is however instrumental to build in an economic manner and to saf ...

ERNST & SOHN2022

Stochastic derivative estimation for max-stable random fields

Erwan Fabrice Koch

We consider expected performances based on max-stable random fields and we are interested in their derivatives with respect to the spatial dependence parameters of those fields. Max-stable fields, such as the Brown-Resnick and Smith fields, are very popula ...

ELSEVIER2022

New metric for carrier selective contacts for silicon heterojunction solar cells

Mathieu Gérard Boccard, Jakub Holovsky

Heterojunction carrier selective contacts for solar cells have gained great attention because of the ability of these contacts to efficiently collect majority carriers while hindering the recombination of minority carriers, thus resulting in the highest re ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Representing location choice within activity-based models

Michel Bierlaire, Timothy Michael Hillel, Janody Pougala

Since the 70s, there has been a growing interest in activity-based modelling. This approach models the need to travel as a result of performing daily activities (Bowman and Ben-Akiva, 2001). Nevertheless, the activities need to be scheduled which involves ...

2022

Ontology-based system to support industrial system design for aircraft assembly

Dimitrios Kyritsis, Jinzhi Lu

The development of an aircraft industrial system is a complex process which faces the challenge of digital discontinuity in multidisciplinary engineering due to various interfaces between different digital tools, leading to extra development time and costs ...

ELSEVIER2022

Molecular dynamics simulations of nucleation and phase transition in halide perovskites

Paramvir Ahlawat

Perovskite solar cells have emerged as the most promising cheaper photovoltaic technology. Besides solar cells, halide perovskites have a wide range of applications due to their remarkable optoelectronic properties. Starting from 3.8% in 2009, solar to the ...

EPFL2022

Sensitivity analysis for bottleneck assignment problems

Tony Alan Wood

In assignment problems, decision makers are often interested in not only the optimal assignment, but also the sensitivity of the optimal assignment to perturbations in the assignment weights. Typically, only perturbations to individual assignment weights a ...

2022

Contact Design for Silicon Heterojunction Solar Cells

Luca Massimiliano Antognini

Today more than ever the world needs clean energy sources and thus a fast deployment and scaling up of the photovoltaic industry. In this context improving solar cell efficiency plays a major role. In order to achieve the maximum single junction efficiency ...

EPFL2022

EMC Impact of Disturbances Generated by Multiple Sources

Farhad Rachidi-Haeri, Marcos Rubinstein, Hamidreza Karami

In this paper, the impact of an increasing number of arbitrary electrical/electronic devices on the overall radiated emissions is investigated. Understanding and quantifying such an impact are prerequisites to the proper evaluation of electromagnetic compa ...

2022

Combining hypothesis- and data-driven neuroscience modeling in FAIR workflows

Daniel Keller

Modeling in neuroscience occurs at the intersection of different points of view and approaches. Typically, hypothesis-driven modeling brings a question into focus so that a model is constructed to investigate a specific hypothesis about how the system work ...

2022