Publications related to On a Four-Parameter Linear Failure Criterion

Related publications (27)

Human personal air pollution clouds in a naturally ventilated office during the COVID-19 pandemic

Dusan Licina, Shen Yang, Maria Viviana Gonzalez Serrano

Personal cloud, termed as the difference in air pollutant concentrations between breathing zone and room sites, represents the bias in approximating personal inhalation exposure that is linked to accuracy of health risk assessment. This study performed a t ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Energy, SBS symptoms, and productivity in Swiss open-space offices: Economic evaluation of standard, actual, and optimum scenarios

Dolaana Khovalyg, Dusan Licina, Verena Marie Barthelmes, Arnab Chatterjee, Cecile Anne Berquand

The fundamental aspiration of new-generation high-performing buildings is to reduce energy use while securing indoor environmental quality conducive to human health and productivity. However, existing frameworks for identifying Key Performance Indicators ( ...

PERGAMON-ELSEVIER SCIENCE LTD2023

A Statistical Framework to Investigate the Optimality of Signal-Reconstruction Methods

Michaël Unser, Pakshal Narendra Bohra, Pol del Aguila Pla

We present a statistical framework to benchmark the performance of reconstruction algorithms for linear inverse problems, in particular, neural-network-based methods that require large quantities of training data. We generate synthetic signals as realizati ...

2023

Influence of the molecular weight and physical properties of a thermoplastic polymer on its dynamic wetting behavior

Valentin Rougier

The wetting dynamics of molten thermoplastic polymers, which are known to influence the force balance of the triple line, are not understood properly despite their importance in many industrial processes. In particular, the influence of the molecular weigh ...

Elsevier2023

Distributed Scheme for Line Overload Mitigation With Linearized AC Power Flow

Ping Hu

The transmission overload after a disturbance poses significant security risk to the power system. Once it happens, an efficient remedial action must be taken to relieve the line overloads as quickly as possible. The line overload mitigation problem become ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Democratizing Machine Learning

Nirupam Gupta, Rafaël Benjamin Pinot, Alexandre David Olivier Maurer

The increasing prevalence of personal devices motivates the design of algorithms that can leverage their computing power, together with the data they generate, in order to build privacy-preserving and effective machine learning models. However, traditional ...

IEEE2022

Measurements of AC Loss Evolution in ITER TF Conductors

Pierluigi Bruzzone, Kamil Sedlák

AC loss in the Nb3Sn cable-in-conduit conductors (CICC) usually decreases after the conductor undergoes electromagnetic cycling. This can be attributed to the increase of inter-strand resistance due to the detachment of the strand-bonding during cyclic loa ...

IEEE Institute of Electrical and Electronics Engineers2022

Lateral ion migration accelerates degradation in halide perovskite devices

Christophe Ballif, Quentin Thomas Jeangros, Kerem Artuk, Christian Michael Wolff, Xin Yu Chin, Daniel Anthony Jacobs

The migration of mobile ions has long been considered a source of performance degradation in devices based on halide perovskites, but details regarding the mechanisms and extent of this problem remain scarce. Here we report the finding that differences in ...

ROYAL SOC CHEMISTRY2022

Reactions of amines with ozone and chlorine: Two novel oxidative methods to evaluate the N-DBP formation potential from dissolved organic nitrogen

Karim-Alexandre Essaied, Urs von Gunten

The composition of oxidant-reactive dissolved organic nitrogen (DON) is poorly characterized, although its ozonation is likely to form a great variety of disinfection by-products containing a nitrogen-oxygen bond (NDBPs). In this study, two chemical oxidat ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Nondestructive characterization of laser powder bed fusion parts with neutron Bragg edge imaging

Roland Logé, Christian Leinenbach, Nikola Kalentics

Laser powder bed fusion is an efficient technique for additive manufacturing of metallic materials. The quality of the material produced depends on the optimization of a large range of build parameters and the complex thermo-mechanical build process is pro ...

ELSEVIER2021

Belief Control Strategies for Interactions Over Weakly-Connected Graphs

Ali H. Sayed, Bicheng Ying

In diffusion social learning over weakly-connected graphs, it has been shown recently that influential agents shape the beliefs of non-influential agents. This paper analyzes this mechanism more closely and addresses two main questions. First, the article ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

High conductivity InAlN/GaN multi-channel two-dimensional electron gases

Nicolas Grandjean, Jean-François Carlin, Elison de Nazareth Matioli, Pirouz Sohi

In this study, we propose a novel, high-conductivity multi-channel heterostructure based on lattice-matched InAlN/GaN channels with modulation-doping-induced two-dimensional electron gases (2DEGs). To facilitate device processing, the channel period thickn ...

IOP PUBLISHING LTD2021

Further development of the RDRA method for the optimal acquisition of data in process integration retrofit projects

Tuong-Van Nguyen

Process Integration techniques are powerful in analysing the energy usage of industrial plants and designing retrofit solutions for increasing their energy efficiency. However they are far from constituting the industrial practice. One primary cause for th ...

ELSEVIER SCI LTD2021

Broad-Spectrum Antiviral Agents Based on Multivalent Inhibitors of Viral Infectivity

Francesco Stellacci

The ongoing pandemic of the coronavirus disease (Covid-19), caused by the spread of the severe acute respiratory syndrome coronavirus 2 (SARS CoV-2), highlights the need for broad-spectrum antiviral drugs. In this Essay, it is argued that such agents alrea ...

WILEY2021

P-GaN Tri-Gate MOS Structure for Normally-Off GaN Power Transistors

Elison de Nazareth Matioli, Jun Ma, Luca Nela, Mohammad Samizadeh Nikooytabalvandani, Catherine Erine, Minghua Zhu, Pirouz Sohi

In this letter, we present a new concept for normally-off AlGaN/GaN-on-Si MOS-HEMTs based on the combination of p-GaN, tri-gate and MOS structures to achieve high threshold voltage (V-TH) and low on-resistance (R-ON). The p-GaN is used to engineer the band ...

Institute of Electrical and Electronics Engineers2021

Reply to comments on "Explicit versus implicit front advancing schemes for the simulation of hydraulic fracture growth" (Int. J. Numer. Anal. Methods Geomech., 2019, 43 (6), 1300-1315)" by Prof. Linkov

Brice Tanguy Alphonse Lecampion, Haseeb Zia

We reply to Prof. Linkov comments on our article entitled "Explicit versus implicit front advancing schemes for the simulation of hydraulic fracture growth" (Int. J. Numer. Anal. Methods Geomech., 2019, 43 (6), 1300-1315). We present additional results ind ...

WILEY2020

Proposed methodology for building-specific earthquake loss assessment including column residual axial shortening

Dimitrios Lignos, Ahmed Mohamed Ahmed Elkady

This paper proposes methodological developments for quantifying the impact of residual axial shortening of first-story steel columns on earthquake loss estimations in steel moment-resisting frame (MRF) buildings. A new formulation is proposed that accounts ...

2020

Nano-photonic Supercontinuum Based Mid-Infrared Dual-Comb Spectroscopy

Luc Thévenaz, Tobias Kippenberg, Camille Sophie Brès, Junqiu Liu, Hairun Guo, Wenle Weng, Fan Yang

We demonstrate an approach to dual-comb spectroscopy, based on dispersion engineered and ultra-broadband supercontinuum generation in photonic integrated nonlinear waveguides, and driven by low-noise fiber-laser combs. Both technologies arc statc-of-the-ar ...

IEEE2020

Assessment of the breakthrough of micropollutants in full-scale granular activated carbon adsorbers by rapid small-scale column tests and a novel pilot-scale sampling approach

Urs von Gunten

This study aimed to compare three approaches for predicting the service life of full-scale GAC adsorbers for the removal of micropollutants. The approaches included (i) rapid small-scale column tests (RSSCTs), (ii) two pilot-scale sampling approaches, and ...

ROYAL SOC CHEMISTRY2020

A 161-mW 56-Gb/s ADC-Based Discrete Multitone Wireline Receiver Data-Path in 14-nm FinFET

Yusuf Leblebici, Andreas Peter Burg, Alessandro Cevrero, Thomas Toifl, Lukas Kull, Ilter Ozkaya, Gain Kim, Cosimo Aprile

This article introduces a wireline receiver (RX) data-path employing discrete multi-tone (DMT) modulation for communicating over electrical links. The DMT RX incorporates a fully digital equalization data-path, with a synthesized and automatically placed a ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2020