Publications related to Wireless Monitoring in Intensive Care Units by a 3D-Printed System with Embedded Electronics

Integrated Wireless Power, Data Communication, and Thermal Sensing System for Autonomous Multisite Brain Implants

Implanted medical devices (IMDs) have been widely developed to support the monitoring and recording of biological data inside the body or brain. Wirelessly powered IMDs, a subset of implantable electronics, have been proposed to eliminate the limitations r ...

EPFL2024

Design and in vitro Characterization of a Wearable Multisensing System for Hydration Monitoring

Sandro Carrara, Sarah Tonello, Ata Jedari Golparvar, Ali Meimandi

Dehydration is a frequent condition in the elderly and can lead to serious health complications if not compensated timely. Early diagnosis can be problematic, as medical examinations in the hospital would be needed. Fully wearable low-cost multisensing dev ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Quantitative T2 Mapping of Acute Pancreatitis

Tom Hilbert, Giulia Piazza

Background: Quantification of the T2 signal by means of T2 mapping in acute pancreatitis (AP) has the potential to quantify the parenchymal edema. Quantitative T2 mapping may overcome the limitations of previously reported scoring systems for reliable asse ...

Wiley2024

Tumescense monitoring system for diagnosing erectile dysfunction and methods of use

Nikolaos Stergiopoulos, Rodrigo Araujo Fraga Da Silva

Systems and methods for monitoring penile tumescence are provided that overcome the drawbacks of previously known systems by providing a wearable formed of a flexible and elastic tube having a plurality of sensors disposed on or embedded within it, the wea ...

2023

REMOTE: Re-thinking Task Mapping on Wireless 2.5D Systems-on-Package for Hotspot Removal

David Atienza Alonso, Giovanni Ansaloni, Marina Zapater Sancho, Darong Huang, Rafael Medina Morillas

2.5D Systems-on-Package (SoPs) are composed by several chiplets placed on an interposer. They are becoming increasingly popular as they enable easy integration of electronic components in the same package and high fabrication yields. Nevertheless, they int ...

2023

Radiation Performance of Antennas Implanted in Small Animals for Neuroengineering

Anja Skrivervik, Stéphanie Lacour, James Daniel Rosenthal, Mingxiang Gao, Kangling Wu, Zvonimir Sipus

Wireless data communication could improve the performance and reliability of biomedical implants used in fundamental neuroscience research by removing infection-prone transcutaneous cabling. The small size of common research animals like mice and rodents, ...

IEEE2023

WINC: A Wireless IoT Network for Multi-Noise Source Cancellation

Haitham Al Hassanieh, Junfeng Guan, Jiaming Wang

This paper introduces Wireless IoT-based Noise Cancellation (WINC) which defines a framework for leveraging a wireless network of IoT microphones to enhance active noise cancellation in noise-canceling headphones. The IoT microphones forward ambient noise ...

Assoc Computing Machinery2023

Analytic Approximation of In-Body Path Loss for Implanted Antennas

Anja Skrivervik, Mingxiang Gao, Zvonimir Sipus

Implantable bioelectronic devices predominantly use wireless links for communication and/or power transfer. When considering transmitting implanted antennas, electromagnetic radiation through biological media is highly attenuated, and previous work has sho ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Toward Metantennas: Metamaterial-Based Antennas for Wireless Communications

Yuanyan Su

Antennas have historically been the most common electromagnetic (EM) technology for wireless communication systems. Antenna as hardware is entirely dependent on the EM properties of the materials used, mostly related to the permittivity and permeability. I ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Radiation Patterns of RF Wireless Devices Implanted in Small Animals: Unexpected Deformations Due to Body Resonance

Anja Skrivervik, Stéphanie Lacour, James Daniel Rosenthal, Mingxiang Gao, Kangling Wu, Zvonimir Sipus, German Augusto Ramirez Arroyave

One challenge in designing RF wireless bioelectronic devices is the impact of the interaction between electromagnetic waves and host body tissues on far-field wireless performance. In this paper, we investigate a peculiar phenomenon of implantable RF wirel ...

2023

Design for Test With Unreliable Memories by Restoring the Beauty of Randomness

Andreas Peter Burg, Marco Widmer, Reza Ghanaatian Jahromi

This article presents a design-for-test methodology for embedded memories. The methodology relies on a fully random fault model of post-fabrication errors, which results in a low-overhead test strategy. The methodology's effectiveness is demonstrated on an ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Hybrid Wireless-Local Communication via Information Propagation for Modular Robotic Synchronization Applications

Jamie Paik, Christoph Heinrich Belke, Kevin Andrew Holdcroft, Alexander Thomas Sigrist

Modular robots hold promise of adaptability, robustness, and versatility. Synchronization of modules is critical; if a module is asynchronous, not only will the robot fail to perform tasks properly, but its behavior may be self-destructive through self-col ...

WILEY2022

Theoretical Efficiency and Dosimetry of Buffered On-body Transmitter Antennas for Wireless Powering of In-body Devices

Anja Skrivervik, Denys Nikolayev

The viable and safe application of wireless power transfer for powering bioelectronic implants requires understanding the wave propagation in heterogeneous and dispersive media, the electromagnetic exposure assessment, and the optimum design of the system ...

IEEE2022

Robust Resource-Aware Self-Triggered Model Predictive Control

Colin Neil Jones, Yingzhao Lian, Yuning Jiang

The wide adoption of wireless devices in the Internet of Things requires controllers that are able to operate with limited resources, such as battery life. Operating these devices robustly in an uncertain environment, while managing available resources, in ...

2022

Development of Thin Film Lithium Niobate Shear Bulk Acoustic Wave Resonators

Soumya Yandrapalli

RF MEMS piezoelectric acoustic resonators are the essential building blocks for RF filters used in RF front-end modules for wireless mobile communication due to their compact size in the MHz-GHz frequency range, high Quality factors and large relative band ...

EPFL2022

FPGA-to-CPU Undervolting Attacks

Mirjana Stojilovic, Dina Gamaleldin Ahmed Shawky Mahmoud

FPGAs are proving useful and attractive for many applications, thanks to their hardware reconfigurability, low power, and high-degree of parallelism. As a result, modern embedded systems are often based on systems-on-chip (SoCs), where CPUs and FPGAs share ...

IEEE2022

Using Machine Learning to Predict Mortality for COVID-19 Patients on Day 0 in the ICU

Sahand Jamal Rahi, Nahal Mansouri

Rationale: Given the expanding number of COVID-19 cases and the potential for new waves of infection, there is an urgent need for early prediction of the severity of the disease in intensive care unit (ICU) patients to optimize treatment strategies.Objecti ...

FRONTIERS MEDIA SA2022

Structured and tiled-based pruning of Deep Learning models targeting FPGA implementations

Alexandre Schmid, Lizeth Gonzalez Carabarin

Model compression techniques have lead to a reduction of size and number of computations of Deep Learning models. However, techniques such as pruning mostly lack of a real co-optimization with hardware platforms. For instance, implementing unstructured pru ...

IEEE2022

On the Insecurity of Vehicles Against Protocol-Level Bluetooth Threats

Mathias Josef Payer, Daniele Antonioli

Cars are some of the most security-critical consumer devices. On the one hand, owners expect rich infotainment features, including audio, hands-free calls, contact management, or navigation through their connected mobile phone. On the other hand, the infot ...

IEEE COMPUTER SOC2022

Propagation-Loss Characterization for Livestock Implantables at (433,868,1400) MHz

Denys Nikolayev

Automated systems based on wearable sensors for livestock monitoring are becoming increasingly popular. Specifically, wireless in-body sensors could yield relevant data, such as ruminal temperature. The collection of such data requires an accurate characte ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021