Publications related to Structured ZnO-based contacts deposited by non-reactive rf magnetron sputtering on ultra-thin SiO2/Si through a stencil mask

Related publications (36)

Comparative analysis of search approaches to discover donor molecules for organic solar cells

stk-search employs multiple search algorithms, including Bayesian optimization, to systematically navigate the chemical space of molecules constructed from modular building blocks. ...

Royal Society of Chemistry (RSC)2025

Element recovery from end-of-life thin-film solar cells

Meret Amrein

The demand for resources is increasing with increasing world population and technological and industrial development. Therefore, the European Union has defined a list of "critical raw materials" (CRM), which are economically important and have a high suppl ...

EPFL2025

Magnetically and optically active edges in phosphorene nanoribbons

Sascha Feldmann

Nanoribbons, nanometre-wide strips of a two-dimensional material, are a unique system in condensed matter. They combine the exotic electronic structures of low-dimensional materials with an enhanced number of exposed edges, where phenomena including ultral ...

2025

An accurate bifacial PV module energy performance model using a direct-diffuse power rating model

Antonin Faes

Predicting the energy output of a bifacial photovoltaic (PV) module is usually not as straightforward as for a monofacial module. The problem usually lies in the estimation of the back-side irradiance which strongly depends on the mounting conditions, trac ...

ELSEVIER SCI LTD2025

Colloidal Atomic Layer Deposition on Nanocrystals Using Ligand-Modified Precursors

Raffaella Buonsanti, Anna Loiudice, Petru Pasquale Albertini, Ona Segura Lecina, Philippe Benjamin Green, Jari Leemans, Mark Adrian Newton, Coline Marie Agathe Boulanger, Krishna Kumar

Atomic layer deposition (ALD) is a method to grow thin metal oxide layers on a variety of materials for applications spanning from electronics to catalysis. Extending ALD to colloidally stable nanocrystals promises to combine the benefits of thin metal oxi ...

Amer Chemical Soc2024

Solar-driven hydrogen production using organic semiconductor nanoparticles

Connor Robert Firth

Photocatalytic solar water splitting is a promising technology for producing green hydrogen that has the potential to compete economically with other commercially utilized carbon-based fuels. While this field has existed for decades, there has yet to be a ...

EPFL2024

Font Side Solutions for c-Si Solar Cells with High-Temperature Passivating Contacts

Ezgi Genç

In this work, we studied the potential of using thin films deposited by plasma-enhanced chemical vapor deposition (PECVD) for two main purposes: introducing an n-type passivating contact at the front of a TOPCon solar cell, or simplifying the fabrication o ...

EPFL2024

Ultra-uniform perovskite crystals formed in the presence of tetrabutylammonium bistriflimide afford efficient and stable perovskite solar cells

Alwani Imanah Rafieh, Jaekeun Lim, Mohammad Khaja Nazeeruddin, Paul Joseph Dyson, Zhaofu Fei, Hiroyuki Kanda, Yong Ding, Jianxing Xia, Hobeom Kim

Compositional engineering of organic-inorganic metal halide perovskite allows for improved optoelectrical properties, however, phase segregation occurs during crystal nucleation and limits perovskite solar cell device performance. Herein, we show that by a ...

2024

Hybrid organic/metal-oxide shells on semiconductor nanocrystals via colloidal atomic layer deposition

Ona Segura Lecina

The escalating energy demand and the imperative necessity to reduce the carbon footprint require transformative approaches to energy conversion. Materials chemistry plays a pivotal role in addressing these global challenges by developing novel materials fo ...

EPFL2024

Plasmonic Nanostructures for Photocatalysis: Material, Photonic and Electronic Effects

Fateme Kiani Shahvandi

Plasmonic photochemistry has a large potential to replace energy-intensive chemical processes with low-temperature, low-pressure light-driven chemical reactions. Plasmonic nanostructures have emerged as promising photocatalysts with exceptional and tunable ...

EPFL2024

Structural divergence of molecular hole selective materials for viable p-i-n perovskite photovoltaics: a comprehensive review

Mohammad Khaja Nazeeruddin, Peng Gao

Perovskite solar cells (PSCs) have garnered significant attention within the photovoltaic research community due to their remarkable progress in just one decade. Among the device configurations, the p-i-n structured PSC offers several advantages, including ...

Royal Society of Chemistry2024

Elimination of buried interfacial voids for efficient perovskite solar cells

Bin Ding, Xianfu Zhang

Establishing optimal interfacial contact is crucial for enhancing the efficiency of perovskite solar cells (PSCs). However, formation of voids at buried interface of perovskite films often hinders this critical objective. Our investigation reveals that the ...

Elsevier2024

Supramolecular interactions using β-cyclodextrin in controlling perovskite solar cell performance

Parnian Ferdowsi, Kevin Sivula, Jun Ho Yum, Jiyoun Seo

In the context of perovskite solar cells (PSCs), enhancing device performance often involves adding a small excess of lead iodide (PbI2) to the precursor solution. However, the presence of unreacted PbI2 can lead to accelerated degradation compromising lon ...

Royal Society of Chemistry2024

Microstructural and electrical characterization of high temperature passivating contacts for silicon solar cells

Sofia Libraro

Recombination at metal/semiconductor interfaces represents the main limitation in mainstream c-Si solar cells, primarily based on the passivated emitter and rear cell (PERC) concept. Full-area passivating contacts based on SiOx/poly-Si stacks are a candida ...

EPFL2024

Optimizing Atomic Layer Deposition Processes with Nanowire-Assisted TEM Analysis

Ivo Utke, Johann Michler, Xavier Maeder

Atomic layer deposition (ALD) is one of the premier methods to synthesize ultra-thin materials on complex surfaces. The technique allows for precise control of the thickness down to single atomic layers, while at the same time providing uniform coverage ev ...

Wiley2024

Alleviating nanostructural phase impurities enhances the optoelectronic properties, device performance and stability of cesium-formamidinium metal-halide perovskites

Anaël Morgane Jaffrès, Christophe Ballif, Quentin Thomas Jeangros, Aïcha Hessler-Wyser, Christian Michael Wolff, Mostafa Rabie Shlaly Bahr Othman, Daniel Anthony Jacobs, Austin George Kuba

The technique of alloying FA+ with Cs+ is often used to promote structural stabilization of the desirable alpha-FAPbI3 phase in halide perovskite devices. However, the precise mechanisms by which these alloying approaches improve the optoelectronic quality ...

Royal Soc Chemistry2024

Ultrafast carrier dynamics and insights in defect mechanism of p-type colloidal ZnO QDs

Jacques-Edouard Moser, Andrea Cannizzo, Etienne Christophe Socie, Camila Bacellar Cases Da Silveira, Victoria Kabanova

In this study, we place a strong emphasis on understanding the ultrafast dynamics of carrier recombination pathways in p-type ZnO, especially in the midgap region. Synthesizing and controlling the properties of p-type ZnO remains a pivotal yet challenging ...

SPIE2024

Identification and Mitigation of Degradation Mechanisms Induced by Heat and Light in NiOx-based Perovskite Solar Cells

Marion Solange Madeleine Dussouillez

Perovskite solar cells (PSCs) offer an attractive solution to increase the efficiency of PV panels via perovskite/silicon tandems thanks to their potential cost-effectiveness and high efficiency. In inverted PSC architecture (p-i-n), commonly used hole con ...

EPFL2024

Photo-doping of spiro-OMeTAD for highly stable and efficient perovskite solar cells

Michael Graetzel, Jacques-Edouard Moser, Etienne Christophe Socie, George Cameron Fish, Aaron Tomas Terpstra, Kai Zhu

A widely used component of high-efficiency perovskite solar cells (PSCs) is the molecular hole-transport material (HTM) spiro-OMeTAD. This organic solid needs to be p-doped to acquire sufficient hole conductivity. However, the conventional doping method us ...

2024

Piezoelectric and elastic properties of Al0.60Sc0.40N thin films deposited on patterned metal electrodes

Federico Peretti, Luis Guillermo Villanueva Torrijo, Silvan Stettler, Marco Liffredo, Nan Xu

Sc-doped aluminum nitride (AlScN) allows for piezoelectric devices with large electromechanical coupling and the benefits increase with larger Sc doping in the film. However, with a larger Sc concentration, the process window narrows, and it is necessary t ...

2024