Publications related to Plasticization of poly-L-lactide for tissue engineering

Related publications (28)

Surface passivation and functionalisation for mass photometry

Laila Abdelaziz Abdelmoniem Elfeky, Suliana Manley, Jenny Sülzle

Interferometric scattering (iSCAT) microscopy enables the label-free observation of biomolecules. Consequently, single-particle imaging and tracking with the iSCAT-based method known as mass photometry (MP) is a growing area of study. However, establishing ...

Wiley2024

Impact of Molecular Dynamics of Polyrotaxanes on Chondrocytes in Double-Network Supramolecular Hydrogels under Physiological Thermomechanical Stimulation

Dominique Pioletti, Yanheng Guo, Theofanis Stampoultzis, Vijay Kumar Rana

Hyaline cartilage, a soft tissue enriched with a dynamic extracellular matrix, manifests as a supramolecular system within load-bearing joints. At the same time, the challenge of cartilage repair through tissue engineering lies in replicating intricate cel ...

American Chemical Society2024

Influence of the molecular weight and physical properties of a thermoplastic polymer on its dynamic wetting behavior

Valentin Rougier

The wetting dynamics of molten thermoplastic polymers, which are known to influence the force balance of the triple line, are not understood properly despite their importance in many industrial processes. In particular, the influence of the molecular weigh ...

Elsevier2023

Core-shell Structured Chitosan-polyethylenimine Nanoparticles for Gene Delivery: Improved Stability, Cellular Uptake, and Transfection Efficiency

Sandrine Gerber, Perrine Agnes Edith Robin, Laura Camille Louise Nicolle

Gene therapy emerged as a promising treatment option for acquired and inherited diseases. The delivery of nucleic acids relies on vectors that condense and encapsulate their cargo. Especially non-viral gene delivery systems are of increasing interest. Howe ...

2022

Multicomponent Alginate-Derived Hydrogel Microspheres Presenting Hybrid Ionic-Covalent Network and Drug Eluting Properties

Sandrine Gerber, François Rémi Pierre Noverraz, Luca Szabó

The development of multifunctional encapsulation biomaterials could help the translation of cell‐based therapies into standard medical care. One of the major hurdles in the field of encapsulated cell transplantation is the current lack of materials present ...

Wiley-VHCA AG2020

Fluorinated surfactants in droplet-based microfluidics: Influence of their composition on the properties of emulsion drops

Gianluca Nicolas Etienne

Miniaturization has been a driving force in many areas of science and technology, most notably in the electronics industry. Droplet-based microfluidics, a methode to produce emulsion drops in a controlled way and at high-throughputs, enables the miniaturiz ...

EPFL2019

Crosslinking Allosteric Sites on the Nucleosome Core Particle

Lucinda Kate Batchelor

Designing compounds that bind to the acidic patch of the nucleosome core particle (NCP) is an emerging therapeutic approach that can inhibit the binding of key chromatin factors. Pretreatment of human ovarian carcinoma, A2780, cells with RAPTA-T, an antime ...

EPFL2019

Micro- and nanoscale hierarchical structure of core-shell protein microgels

Giovanni Dietler, Raffaele Mezzenga, Francesco Simone Ruggeri

Protein nanofibrils were first discovered in the context of misfolding and neurodegenerative diseases but have recently been found in naturally occurring functional materials including algal adhesives, bacterial coatings, and even mammalian melanosomes. Th ...

Royal Society of Chemistry2016

Effects of Grafting Density and Film Thickness on the Adhesion of Staphylococcus epidermidis to Poly(2-hydroxy ethyl methacrylate) and Poly(poly(ethylene glycol)methacrylate) Brushes

Harm-Anton Klok, Sorin Alexandru Ibanescu

Thin polymer films that prevent the adhesion of bacteria are of interest as coatings for the development of infection-resistant biomaterials. This study investigates the influence of grafting density and film thickness on the adhesion of Staphylococcus epi ...

Wiley-Blackwell2016

Additives for vaccine storage to improve thermal stability of adenoviruses from hours to months

Francesco Stellacci, Paulo Henrique Jacob Silva, Randy Patrick Carney, Valeria Cagno

Up to 80% of the cost of vaccination programmes is due to the cold chain problem (that is, keeping vaccines cold). Inexpensive, biocompatible additives to slow down the degradation of virus particles would address the problem. Here we propose and character ...

Nature Publishing Group2016

Degrafting of Poly(poly(ethylene glycol) methacrylate) Brushes from Planar and Spherical Silicon Substrates

Harm-Anton Klok, Nariye Cavusoglu Ataman

Densely grafted, hydrophilic polymer brushes produced via surface-initiated controlled radical polymerization have been shown to undergo degrafting upon exposure to aqueous media. This degrafting process has been proposed to involve swelling-induced, mecha ...

American Chemical Society2016

PEGylated DOTA-AHA-Based Gd-III Chelates: A Relaxometric Study

Lothar Helm, Shima Karimi

Three PEGylated derivatives of 6-amino-2-[4,7,10-tris(carboxymethyl)-1,4,7,10-tetrazacyclododec-1-yl]hexanoic acid (DOTA-AHA) with different molecular weights were prepared and characterized. Their Gd-III chelates were studied in aqueous solution through v ...

Wiley-Blackwell2015

X-ray irradiation synthesis of PEG-coated Au-Pd nanoparticles

Giorgio Margaritondo

We demonstrate that the combination of x-ray irradiation and capping by polyethylene glycol (PEG) produces excellent flexibility in controlling the structure of Au-Pd nanoparticles while preserving their catalytic performance. We specifically adopted two d ...

Institute of Physics2015

Photo-polymerization, swelling and mechanical properties of cellulose fibre reinforced poly(ethylene glycol) hydrogels

Jan-Anders Edvin Maansson, Dominique Pioletti, Pierre-Etienne Bourban, Andreas Schmocker, Azadeh Khoushabi

The application of hydrogels as load-bearing biomedical components is often limited by their mechanical properties. Often an attempt to improve a hydrogel's stiffness is accompanied by a loss of toughness and swelling properties. In this work, we show that ...

Elsevier Sci Ltd2015

One-Pot Polyol Synthesis of Pt/CeO2 and Au/CeO2 Nanopowders as Catalysts for CO Oxidation

Christian Ludwig, Andrea Testino, Frank Pilger

The facile one-pot synthesis of CeO2-based catalysts has been developed to prepare a relatively large amount of nanopowders with relevant catalytic activity towards CO oxidation. The method consists of a two-steps process carried out in ethylene glycol: in ...

Amer Scientific Publishers2015

Mechanism of formation of silver nanoparticles in MAG-DMAEMA copolymer aqueous solutions

Philippe Buffat, Elena Suvorova Buffat

Dispersed Ag nanoparticles were prepared in aqueous solutions in the presence of pure poly[2-(dimethylamino)ethyl methacrylate] (poly-DMAEMA), poly[2-deoxy-2-methacrylamido-d-glucose] (poly-MAG), and their copolymers of poly[MAG–DMAEMA] with different mole ...

Springer Verlag2015

MULTIFUNCTIONALIZED SPIONs FOR NUCLEAR TARGETING: CELL UPTAKE AND GENE EXPRESSION

Heinrich Hofmann, Alke Fink

Superparamagnetic iron oxide nanoparticles (SPIONs) are used in many biological applications, which necessitate intracellular targeting. Here, we investigate intracellular localization and gene expression in HeLa cells after treatment with functionalized S ...

World Scientific Publ Co Pte Ltd2014

Energy dissipation in concentrated monodisperse colloidal suspensions of silica particles in polyethylene glycol

Véronique Michaud, Mathieu Soutrenon

Highly concentrated colloidal suspensions exhibit a discontinuous shear-thickening behaviour. The transition from a low to a high viscosity state is associated to a large energy dissipation. This effect could find applications in structural damping while t ...

Springer2014

Synthesis of poly(ethylene-co-butylene)-block-poly(ethylene oxide) surfactant and its use in the synthesis of polyhydroxyethyl methacrylate nanoparticles containing azo-dye

Thomas Geiger, Yee Song Ko

A synthetic path to poly(ethylene-co-butylene)-block-poly(ethylene oxide), a substitute for the "KLE" surfactant was developed. For this purpose, mono hydroxyl end-functionalized poly(ethylene-co-butylene) (similar to 3800 g mol(-1)) was modified with a tr ...

Royal Soc Chemistry2014

Hybrid Polymer Foams for Osteochondral Tissue Engineering

Matthieu Cuénoud

Articular cartilage is a soft tissue that covers the ends of articulating bones, and is essential for maintaining joint motion, i.e. translation and rotation between the bones. Articular cartilage nevertheless has a limited capacity for self-repair, and ca ...

EPFL2012