Unsymmetrical and Symmetrical Zn(II) Phthalocyanines as Hole-Transporting Materials for Perovskite Solar Cells

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper ...

Perovskite-Cu(In,Ga)Se-2 (CIGS) thin-film tandem technology provides an exciting prospect to achieve low-cost high-efficiency photovoltaic devices by high throughput roll-to-roll processing on flexible substrates. However, no report on flexible perovskite- ...

Iodide migration causes degradation of the perovskite solar cells. Here, we observe the direct migration of iodide into the hole-transport layer in a device. We demonstrate that ultrathin room temperature atomic layer-deposited Al2O3 on the perovskite surf ...

Many multication perovskites for highly stable and efficient solar cells benefit from rubidium iodide introduced in the precursor solution. It is well-known that Rb+ influences positively the optoelectronic and mobility properties and has a direct effect u ...

Barium titanate (BTO) is a promising perovskite-like material, exhibiting interesting functionalities, such as ferroelectricity, piezoelectricity, high dielectric constant, and electrooptic coefficients. All these properties are closely related to the orie ...

Perovskite solar cells (PSCs) have immense potential for high power conversion efficiency with an ease of fabrication procedure. The fundamental understanding of interfacial kinetics in PSCs is crucial for further improving of their photovoltaic performanc ...

Optimizing the morphology of metal halide perovskite films is an important way to improve the performance of solar cells(1) when these materials are used as light harvesters(2), because film homogeneity is correlated with photovoltaic performance(3). Many ...

We study doping and metallization of black silicon (bSi) boron emitters formed by ion implantation or diffusion. We demonstrate that conformal metal layers can be deposited on bSi by electron beam evaporation. Raman spectroscopy shows that high boron conce ...

Redox mediators play a major role determining the photocurrent and the photovoltage in dye-sensitized solar cells (DSCs). To maintain the photocurrent, the reduction of oxidized dye by the redox mediator should be significantly faster than the electron bac ...

We present a novel passivating contact structure based on a nanostructured silicon-based layer. Traditional poly-Si junctions feature excellent junction characteristics but their optical absorption induces current losses when applied to the solar cell fron ...

Reducing wafer thickness while increasing power conversion efficiency is the most effective way to reduce cost per Watt of a silicon photovoltaic module. Within the European project 20 percent efficiency on less than 100-mu m-thick, industrially feasible c ...

We present a review on stencil lithography and focus on the particular interest and challenges when applying it to the scalable fabrication of nm-size devices. We first describe the basic technique with its main advantages and challenges. Then we review th ...

Ultrafast optical probing of the electric field by means of Stark effect in planar heterojunction cyanine dye / fullerene organic solar cells enables to directly monitor the dynamics of free electron formation during the dissociation of interfacial charge ...

Metal-oxide-free methylammonium lead iodide perovskite-based solar cells are prepared using a dual-source thermal evaporation method. This method leads to high quality reproducible films with large crystal domain sizes allowing for an in depth study of the ...

What will the cities of tomorrow look like? This is a crucial question because in the four and a half billion years of its existence, the Earth has never been so threatened, as it is today. Since 2008 half of the world's population has lived in towns – mor ...

We report on the development of fully flexible microcrystalline and micromorph tandem solar cells directly on low-cost substrates like poly-ethylen-terephtalate (PET) and poly-ethylen-naphtalate (PEN). The cells are deposited in nip or nip/nip configuratio ...

A novel heteroleptic ruthenium complex carrying a heteroaromatic-4,4'-pi-conjugated 2,2'-bipyridine [Ru(II)LL'(NCS)(2)] (L = 4,4'-bis[(E)-2-(3,4-ethylenedioxythien-2-yl)vinyl]-2,2'-bipyridine, L' = 4,4'-(dicarboxylic acid)-2,2'-bipyridine) was synthesized ...

Unsymmetrical and Symmetrical Zn(II) Phthalocyanines as Hole-Transporting Materials for Perovskite Solar Cells

Chat with Graph Search

Dataset for "Low-temperature processing of screen-printed piezoelectric KNbO3 with integration onto biodegradable paper substrates"

Laser Patterned Flexible 4T Perovskite-Cu(In,Ga)Se-2 Tandem Mini-module with Over 18% Efficiency

Atomic Layer-Deposited Aluminum Oxide Hinders Iodide Migration and Stabilizes Perovskite Solar Cells

Postpassivation of Multication Perovskite with Rubidium Butyrate

Length Microstructure analysis of epitaxial BaTiO3 thin films on SrTiO3-buffered Si: Strain and dislocation density quantification using HRXRD methods

Interfacial Kinetics of Efficient Perovskite Solar Cells

The effect of illumination on the formation of metal halide perovskite films

Metallized Boron-Doped Black Silicon Emitters For Front Contact Solar Cells

Copper Bipyridyl Redox Mediators for Dye-Sensitized Solar Cells with High Photovoltage

Passivating electron contact based on highly crystalline nanostructured silicon oxide layers for silicon solar cells

Manufacturing 100-mu m-thick silicon solar cells with efficiencies greater than 20% in a pilot production line

Resistless nanofabrication by stencil lithography: A review

Dissociation of charge transfer states and carriers separation in bilayer organic solar cells - A time-resolved electroabsorption spectroscopy study

Metal-Oxide-Free Methylammonium Lead Iodide Perovskite-Based Solar Cells: the Influence of Organic Charge Transport Layers

Optimisation of Urban Form by the Evaluation of the Solar Potential

Development of micromorph tandem soalr cells on flexible low cost plastic substrates

Electron-rich heteroaromatic conjugated bipyridine based ruthenium sensitizer for efficient dye-sensitized solar cells

Nanostructured materials for solar energy conversion