Publications related to The DEMO wall load challenge

Related publications (27)

Models implemented in the methodological approach to design the initial STEP first wall contour

Kevin Henricus Annemarie Verhaegh, Davide Galassi, Filippo Bagnato, Dario Vaccaro

The official Spherical Tokamak for Energy Production mission aims to demonstrate the ability to generate net electricity from fusion with the STEP Prototype Power plant. One of the key technological and engineering challenges in fusion power plants is mana ...

Elsevier Science Sa2024

Performance of energy piles foundation in hot-dominated climate: A case study in Dubai

Lyesse Laloui, Elena Ravera, Sofie Elaine ten Bosch

Energy piles represent an innovative technology that can help provide sustainable geothermal heating or cooling energy for thermal conditioning purposes. In hot-dominated climates, the interest is to inject heat in the ground and extract energy for space-c ...

Pergamon-Elsevier Science Ltd2024

Experimental Investigation on Size-Effect of Rubble Stone Masonry Walls Under In-Plane Horizontal Loading: Overview and Preliminary Results

Katrin Beyer, Savvas Saloustros

Rubble stone masonry is a common construction typology of historical city centres and vernacular architecture. While past earthquakes have shown that it is one of the most vulnerable masonry construction typologies, there are few experimental campaigns giv ...

2024

Decomposition method to evaluate district heating/cooling network potential at urban scale

Ana Catarina Gouveia Braz, François Maréchal, Luc Girardin, Bingqian Liu

In this work, a tool to design district heating networks (DHN) is presented and applied to the city of Lausanne as a case study. The evaluation of the buildings’ heat/cooling demand is performed using a Geographic Information System (GIS) database, built f ...

Associazione Italiana Di Ingegneria Chimica2024

The magnet feeders for the European DEMO fusion reactor: Conceptual design and recent advances

Rainer Wesche, Roberto Guarino

The magnet feeders are part of the critical systems of a fusion reactor since they represent the interface between the in-cryostat components at 4.5 K and the room-temperature cryogenic plant and power supply. The European DEMO tokamak foresees 16 toroidal ...

2024

Impact of substrate clogging on vertical connectivity

Giovanni De Cesare, Robin Schroff, Romain Maxime Dubuis

Connectivity between the hyporheic zone and the flow is essential for the development of benthos and the reproductive success of spawning fish. The infiltration of fine sediment leads to clogging of the riverbed, reducing porosity and vertical water exchan ...

2023

Experimental study of the hydrodynamic and thermal performances of ventilated wall structures

Dolaana Khovalyg, Mohammad Rahiminejad

The presence of a ventilated air gap behind the external cladding in a building envelope is known to have a tangible contribution to the overall performance of the wall assembly. In the present study, the hydrodynamic and thermal performances of ventilated ...

2023

Design and Development of a Diagnostic System for a Non-Intercepting Direct Measure of the SPIDER Ion Source Beamlet Current

Basile Marie Jacques Pouradier Duteil

Stable and uniform beams with low divergence are required in particle accelerators; therefore, beyond the accelerated current, measuring the beam current spatial uniformity and stability over time is necessary to assess the beam performance, since these pa ...

MDPI2023

Global 'zero particle flux-driven' gyrokinetic analysis of the density profile for a TCV plasma

Olivier Sauter, Stephan Brunner, Gabriele Merlo, Alberto Mariani

The tokamak `a configuration variable (TCV) is a small-sized tokamak, where finite size effects (often called 'rho-star' or 'global' effects) could significantly impact the heat and particle fluxes, leading to discrepancies between gyrokinetic flux-tube re ...

IOP Publishing Ltd2023

Present design of the Steering Mirror Assembly (SMA) for ITER ECHUL

Timothy Goodman, René Chavan, Anastasia Xydou

In the ITER Tokamak, four Electron Cyclotron Heating Upper Launchers (ECHUL) are needed to control plasma instabilities at the rational surfaces, most importantly the q = 3/2 and q = 2/1 neoclassical tearing modes (NTMs). Each ECHUL is equipped with a set ...

2023

Spectroscopic characterisation of TCV divertor towards a detached regime

Lorenzo Martinelli

The challenge of power exhaust of the high heat and particle fluxes foreseen for ITER and the forthcoming nuclear fusion reactors can be mitigated by operating in a detached divertor regime. This regime has been the object of three decades of studies, as i ...

EPFL2023

Small-scale turbopumps for waste heat recovery applications based on an organic Rankine cycle: a study from pre-design to experimental validation

Sajjad Zakeralhoseini

The organic Rankine cycle (ORC) system is among the technologies applied to exploit waste heat in vehicles. Since common organic fluids have lower latent heat than water, higher mass flow rates are required to convert the same waste heat, considerably incr ...

EPFL2023

Characterisation of detachment in the MAST-U Super-X divertor using multi-wavelength imaging of 2D atomic and molecular emission processes

Basil Duval, Kevin Henricus Annemarie Verhaegh, Artur Perek

In this work, we provide the first 2D spatially resolved description of radiative detachment in MAST-U Super-X L-mode divertor plasmas. The Super-X magnetic configuration was designed to achieve reduced heat- and particle loads at the divertor target compa ...

IOP Publishing Ltd2023

Techno-economic and environmental analysis of high temperature heat pumps integration into industrial processes: the ammonia plant and pulp mill cases

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

Heat pumps will play an important role in improving the performance of the industrial processes aiming to decarbonize their heating requirements. Yet, defining the best operating conditions of those devices may be a challenging task, as they are embedded i ...

Elsevier2023

Heat pumping and renewable energy integration for decarbonizing brewery industry and district heating

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

The energy integration of brewery plants and urban agglomerations has many benefits in terms of rational energy use and reduced environmental impact, especially during scenarios of uncertain supply chain and volatile market prices. In fact, the diversifica ...

Elsevier2023

Deep Q-learning agent for building earthquake resisting wall

Katrin Beyer, Qianqing Wang, Ketson Roberto Maximiano Dos Santos

The construction of dry-joint brick masonry that is subject to seismic loading can be modelled as a strategy problem wherein bricks must be laid to form a load resisting structure. To learn how to mount bricks while considering relevant engineering criteri ...

2022

Towards Beam-Beam Simulations for FCC-ee

Péter Kicsiny, Xavier Buffat, Tatiana Pieloni, Mike Seidel, Giovanni Iadarola

The FCC-ee (Future Circular Collider) lepton collider is currently the most favored next generation research infrastructure project at CERN, aimed at studying properties of standard model particles with the highest precision ever. The chosen parameters of ...

JACoW Publishing, Geneva, Switzerland2022

Spatio-Temporal Estimation of Renewable Energy Potential in Built Environments using Big Data

Alina Ursula Rosa Walch

To achieve the goals of the Paris Agreement on climate change, governments around the world must shift to renewable energy (RE) to drastically reduce their CO2 emissions within the next 10-30 years. The development of effective strategies for RE integratio ...

EPFL2022

Local heating and cooling effectiveness - an evaluation method based on calculated local and overall thermal state

Dolaana Khovalyg, Mohamad Rida

The application of Personal Comfort Systems (PCS) in the buildings demonstrated their potential to improve thermal comfort and reduce energy use by the space conditioning HVAC systems. With its personal controllability (on-demand) PCS is a practical soluti ...

TU Delft2022

Assessing Computational Thinking: Development and Validation of the Algorithmic Thinking Test for Adults

Olivier Lévêque, Jessica Elke Dehler Zufferey, Cécile Hardebolle, Marc Lafuente Martinez

This study describes the development and validation process of a computational thinking (CT) test for adults. The team designed a set of items and explored a subset of those through two qualitative pilots. Then, in order to provide validity evidence based ...

2022