Publications related to Liquid metal infiltration into ceramic particle compacts chemically and morphologically heterogeneous

Related publications (30)

Influence of Si3N4 fillers and pyrolysis profile on the microstructure of additively manufactured silicon carbonitride ceramics derived from polyvinylsilazane

In this work, various methods were used to improve the printability of a photocurable polyvinylsilazane resin filled with silicon nitride particles for digital light processing. The developed resin was used as a preceramic polymer for polymer-to-ceramic co ...

Taylor & Francis Ltd2024

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials Part-III: Experimental verification of conversion products and infiltration depth by infiltration of Si-Zr alloy into mixed SiC/ graphite preforms

Ludger Weber, Caroline Hain, Manoj Kondibhau Naikade, Annapaola Parrilli

Porous carbonaceous preforms, made from graphite and silicon carbide (SiC) powders, with varying graphite powder mass fractions and particle sizes, were infiltrated at 1500 degrees C and 1700 degrees C by Si-8 at. pct Zr alloy to produce dense Si-Zr-SiC co ...

ELSEVIER SCI LTD2023

Dataset for 'Printed ecoresorbable temperature sensors for environmental monitoring'

Danick Briand, Nicolas Francis Fumeaux, James Alec Pierce Bourely

This data set contains the data collected during the FNS project Green Piezo (Grant no. 179064) in association with the recent publication entitled “Printed ecoresorbable temperature sensors for environmental monitoring”. This work aims to study the effect ...

Zenodo2023

Micromechanics of oxide inclusions in ferrous alloys

Alejandra Inés Slagter

Oxide inclusions are inevitably present in steel as a direct consequence of the steelmaking process; as a result, a cubic centimetre of modern steel will generally contain about a million of these hard and brittle micrometre-sized ceramic particles. Inclus ...

EPFL2023

Sinter-Resistant Nickel Catalyst for Lignin Hydrogenolysis Achieved by Liquid Phase Atomic Layer Deposition of Alumina

Jeremy Luterbacher, Songlan Sun, Farzaneh Talebkeikhah

Lignin hydrogenolysis is a key step in the sustainable production of renewable bio-based chemicals and fuels. Heterogeneous metal catalysts have led to high yields but they rapidly deactivate, notably due to nanoparticle sintering and carbonaceous deposit ...

2023

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part II: Experimental verification of modelling approaches by infiltration of Si-Zr alloy into idealized microchannels

Ludger Weber, Caroline Hain, Manoj Kondibhau Naikade

In this work, the mechanisms leading to the pore closure in reactive melt infiltration (RMI) of carbon by pure silicon and a near eutectic Si-8 at-pct Zr alloy at 1500 and 1700 degrees C under vacuum were studied. Various geometrical configurations of micr ...

ELSEVIER SCI LTD2022

Neural Network Potentials for Age Hardening Aluminum Alloys

Daniel John Gilles Marchand

High-strength metal alloys achieve their performance via careful control of precipitates and solutes. The nucleation, growth, and kinetics of precipitation, and the resulting mechanical properties, are inherently atomic scale phenomena, particularly during ...

EPFL2022

Liquid metal infiltration of silicon based alloys into porous carbonaceous materials. Part I: Modelling of channel filling and reaction phase formation

Ludger Weber, Manoj Kondibhau Naikade

A relation for an adequate pore fraction needed to obtain residual Si and C free composites via reactive Si-X alloy infiltration is presented. The volume ratio of SiC and carbonaceous phase, the composition of the infiltrating liquid and the apparent densi ...

ELSEVIER SCI LTD2022

Multiscale microshaping of functionally graded polymer-derived SiCN ceramics

Lorenz Hagelüken

Polymer-derived ceramics (PDCs) exhibit excellent properties and are compatible with many shaping techniques due to the liquid character of the preceramic polymers (PCPs). Furthermore, their properties are adjustable by modifying the precursor composition ...

EPFL2022

Modeling of precipitate strengthening with near-chemical accuracy: case study of Al-6xxx alloys

William Curtin, Yi Hu

Many metal alloys are strengthened by controlling precipitation to achieve an optimal peak-aged condi-tion where the strength-limiting processes of precipitate shearing and Orowan looping are thought to be comparable. Qualitative models have long captured ...

PERGAMON-ELSEVIER SCIENCE LTD2022

Strong silicon oxide inclusions in iron

Andreas Mortensen, Léa Deillon, Alejandra Inés Slagter, Joris Pierre Everaerts

Oxide inclusions are ubiquitous in steel and are known to affect, generally in a negative sense, the mechanical performance of steel products. Micromechanical properties of those phases are therefore important, yet they have remained largely unexplored. We ...

2022

Study and characterization of silicon metal alloys systems for the reactive infiltration process of ceramic matrix composites

Manoj Kondibhau Naikade

Silicon infiltrated silicon carbide (SiSiC) is one of the most promising and economical non-oxide ceramic matrix composites for high-temperature structural applications. In recent years infiltration by Si-alloys instead of pure Si has become popular to avo ...

EPFL2021

Surface energy contributions to the work of infiltration in metal matrix composite processing

Andreas Mortensen, Gionata Schneider

The work needed to mechanically drive molten metal into a porous solid preform when producing a composite material by infiltration can significantly exceed the energy change required for thermodynamically reversible infiltration. We measure, by quantitativ ...

2021

Coupled segregation mechanisms of Sc, Zr and Mn at theta ' interfaces enhances the strength and thermal stability of Al-Cu alloys

Baptiste Thomas Jean Rouxel

The refinement and thermal stability of intermediate theta-prime (theta') precipitates are critical in the development of new high strength 2xxx series aluminium-copper (Al-Cu) alloys for high temperature applications. In this work, we use trace additions ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Impact of oxygen content in powders on the morphology of the laser molten tracks in preparation for additive manufacturing of silicon

Patrik Willi Hoffmann, Lucas Güniat

Powder additive pulsed Nd:YAG laser (wavelength 1064 nm), with the aim of preparing AM of such material. The influence of oxygen content in the initial silicon powders on the continuous tracks morphology was investigated. It was found that the initial oxyg ...

ELSEVIER2020

Machine learning for metallurgy I. A neural-network potential for Al-Cu

William Curtin, Daniel John Gilles Marchand, Albert Johann Glensk, Abhinav Jain

High-strength metal alloys achieve their performance via careful control of precipitates and solutes. The nucleation, growth, and kinetics of precipitation, and the resulting mechanical properties, are inherently atomic scale phenomena, particularly during ...

2020

Dynamic wetting in pressure-infiltration of ceramic particle preforms by molten metal

Gionata Schneider

This thesis investigates the interaction between mechanically induced flow of a liquid metal into a porous solid, and kinetic effects at the triple line. The approach is experimental and focuses on metal-ceramic systems for which the literature gives value ...

EPFL2019

Structural and microstructural studies on SiC-SiO2 ceramic composites

Ho-Yun Lee

In this study, SiC ceramic substrates were prepared with 99.5% silicon carbide powders which were came from waste silicon mud during the manufacturing process of solar cells. It is found that a SiO2 layer with 50 nm in thickness is present on the SiC surfa ...

2019

Studying the wettability of Si and eutectic Si-Zr alloy on carbon and silicon carbide by sessile drop experiments

Ludger Weber, Manoj Kondibhau Naikade

The contact angles of two different systems, molten silicon and a eutectic Si-8 at. pct Zr alloy and their evolution over timeon vitreous carbon and polycrystalline silicon carbide (SiC) substrates were investigated at 1500 degrees C under vacuum, as well ...

ELSEVIER SCI LTD2019

Geometric ergodicity for some space-time max-stable Markov chains

Erwan Fabrice Koch

Max-stable processes are central models for spatial extremes. In this paper, we focus on some space-time max-stable models introduced in Embrechts et al. (2016). The processes considered induce discrete-time Markov chains taking values in the space of cont ...

ELSEVIER SCIENCE BV2019