Publications related to Numerical Simulation of the Semi-Rigid Behaviour of Integrally Attached Timber Folded Surface Structures

Related publications (28)

Experimentally validated pre-design maps and performance estimation methods for small-scale turbopumps for organic rankine cycles

Jürg Alexander Schiffmann, Sajjad Zakeralhoseini

The organic Rankine cycle (ORC) system is considered a promising technology to exploit thermodynamic potential of waste heat. Small-scale ORC applications, including both vehicular applications and stationary power plants, would greatly benefit from more c ...

Global Power and Propulsion Society2025

Experimental Investigation on Size-Effect of Rubble Stone Masonry Walls Under In-Plane Horizontal Loading: Overview and Preliminary Results

Katrin Beyer, Savvas Saloustros

Rubble stone masonry is a common construction typology of historical city centres and vernacular architecture. While past earthquakes have shown that it is one of the most vulnerable masonry construction typologies, there are few experimental campaigns giv ...

2024

Instabilities in Elastic and Magneto-Elastic Beams and Shells: from Shell Buckling to the Design of a Programmable Braille Reader

Arefeh Abbasi

In this thesis, we conduct a comprehensive investigation into structural instabilities of both elastic and magneto-elastic beams and shells, resulting in a creative proposal to design a programmable braille reader. Methodologically, we combine numerical si ...

EPFL2024

Adaptive Finite Elements with Large Aspect Ratio. Application to Aluminium Electrolysis

Paride Passelli

The goal of this work is to use anisotropic adaptive finite elements for the numerical simulation of aluminium electrolysis. The anisotropic adaptive criteria are based on a posteriori error estimates derived for simplified problems. First, we consider an ...

EPFL2024

A cut-cell method for the numerical simulation of 3D multiphase flows with strong interfacial effects

Marco Picasso, Alexandre Caboussat, Alexandre Masserey, Julien Hess

We present a numerical model for the approximation of multiphase flows with free surfaces and strong interfacial effects. The model relies on the multiphase incompressible Navier-Stokes equations, and includes surface tension effects on the interfaces betw ...

Academic Press Inc Elsevier Science2024

Short-term behavior of glass fiber-polymer composite bending-active elastica beam under service load application

Thomas Keller, Landolf-Giosef-Anastasios Rhode-Barbarigos, Tara Habibi

Bending-active elastica beam is a structural configuration that is based on the elastic deformation of an initially straight beam. This deformation occurs when horizontal displacements are applied to a sliding support, causing the beam to bend into an arch ...

2024

Pseudo-Three-Dimensional Analytical Model of Linear Induction Motors for High-Speed Applications

Mario Paolone, André Hodder, Simone Rametti, Lucien André Félicien Pierrejean

Literature on linear induction motors (LIMs) has proposed several approaches to model the behavior of such devices for different applications. In terms of accuracy and fidelity, field analysis-based models are the most relevant. Closed-form or numerical so ...

2024

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Xhemsi Malja

Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...

EPFL2024

A global framework for data-informed bridge examination

Eugen Brühwiler, Numa Joy Bertola, Philippe Schiltz

Examining the performance of an existing bridge requires information on several aspects, such as design choices, material properties, and ongoing degradation processes. It often happens that some critical information is not available. The traditional appro ...

2024

Error assessment of an adaptive finite elements-neural networks method for an elliptic parametric PDE

Maude Girardin, Marco Picasso, Alexandre Caboussat

We present a finite elements-neural network approach for the numerical approximation of parametric partial differential equations. The algorithm generates training data from finite element simulations, and uses a data -driven (supervised) feedforward neura ...

Elsevier Science Sa2024

Orbital-Resolved DFT plus U for Molecules and Solids

Nicola Marzari, Iurii Timrov

We present an orbital-resolved extension of the Hubbard U correction to density-functional theory (DFT). Compared to the conventional shell-averaged approach, the prediction of energetic, electronic and structural properties is strongly improved, particula ...

Amer Chemical Soc2024

Understanding snow saltation parameterizations: lessons from theory, experiments and numerical simulations

Michael Lehning, Armin Sigmund, Daniela Brito Melo

Drifting and blowing snow are important features in polar and high mountain regions. They control the surface mass balance in windy conditions and influence sublimation of snow and ice surfaces. Despite their importance, model representations in weather an ...

2024

An Iterative Adaptive Dynamic Programming Approach for Macroscopic Fundamental Diagram-Based Perimeter Control and Route Guidance

Nikolaos Geroliminis

Macroscopic fundamental diagrams (MFDs) have been widely adopted to model the traffic flow of large-scale urban networks. Coupling perimeter control and regional route guidance (PCRG) is a promising strategy to decrease congestion heterogeneity and reduce ...

Informs2024

Validation and Application of Hysteresis Loss Model for HTS Stacks and Conductors for Fusion Applications

Nikolay Bykovskiy

Numerous conductor designs for pulsed magnets based on High Temperature Superconductors (HTS), featuring stacks of tapes are currently being proposed. A major contribution to the AC losses is expected to be given by hysteresis losses. Several numerical mod ...

IEEE Institute of Electrical and Electronics Engineers2024

Structure and dynamics of liquid water from ab initio simulations: adding Minnesota density functionals to Jacob's ladder

Ursula Röthlisberger, Martin Peter Bircher, Justin Villard

The accurate representation of the structural and dynamical properties of water is essential for simulating the unique behavior of this ubiquitous solvent. Here we assess the current status of describing liquid water using ab initio molecular dynamics, wit ...

Royal Soc Chemistry2024

Analytical Model of Single-Sided Linear Induction Motors for High-Speed Applications

Mario Paolone, André Hodder, Simone Rametti, Lucien André Félicien Pierrejean

This article describes a field-based analytical model of single-sided linear induction motors (SLIMs) that explicitly considers the following effects altogether: finite motor length, magnetomotive force mmf space harmonics, slot effect, edge effect, and ta ...

IEEE2024

Learning the intrinsic dynamics of spatio-temporal processes through Latent Dynamics Networks

Alfio Quarteroni, Francesco Regazzoni, Stefano Pagani

Predicting the evolution of systems with spatio-temporal dynamics in response to external stimuli is essential for scientific progress. Traditional equations-based approaches leverage first principles through the numerical approximation of differential equ ...

Nature Portfolio2024

The time-domain Cartesian multipole expansion of electromagnetic fields

Emanuela Radici, Farhad Rachidi-Haeri, Marcos Rubinstein, Nicolas Mora Parra, Elias Per Joachim Le Boudec

Time-domain solutions of Maxwell’s equations in homogeneous and isotropic media are paramount to studying transient or broadband phenomena. However, analytical solutions are generally unavailable for practical applications, while numerical solutions are co ...

Nature Publishing Group2024

Modelling of energetic particle drive and damping effects on TAEs in AUG experiment with ECCD

Alexander Karpushov

The impact of electron cyclotron current drive (ECCD)-driven current on toroidicity-induced Alfven eigenmodes (TAEs) in experiments on the AUG tokamak is investigated numerically. The dynamical evolution of the plasma profiles and equilibria are modelled w ...

IOP Publishing Ltd2024

Numerical Modeling of FRP-Strengthened Masonry Structures Using Equivalent Frame Models

Katrin Beyer, Francesco Vanin, Ivana Bozulic

The present study focuses on enhancing the seismic resistance of existing masonry structures. To that aim, the use of fiber-reinforced polymer (FRP) strengthening serves to improve structural behaviour by attaching FRP strips to the masonry walls. Despite ...

Springer2024