Publications related to Sintering of NaCl powder: Mechanisms and first stage kinetics

Related publications (31)

A cut-cell method for the numerical simulation of 3D multiphase flows with strong interfacial effects

Marco Picasso, Alexandre Caboussat, Alexandre Masserey, Julien Hess

We present a numerical model for the approximation of multiphase flows with free surfaces and strong interfacial effects. The model relies on the multiphase incompressible Navier-Stokes equations, and includes surface tension effects on the interfaces betw ...

Academic Press Inc Elsevier Science2024

Unraveling the Uptake of Glyoxal on a Diversity of Natural Dusts and Surrogates: Linking Dust Composition to Glyoxal Uptake and Estimation of Atmospheric Lifetimes

Michel Rossi, Hui Chen

The uptake of glyoxal (Gly) on 28 different samples with varying mineralogical origins, such as clays, mineral proxies, and natural dusts from the major arid regions of the Earth, was determined. Experiments were performed at ambient temperature inside a K ...

Amer Chemical Soc2024

Spinel Protective Coatings for Solid Oxide Cell (SOC) Interconnects (ICs)

Samaneh Daviran

Abstract The degradation of metal interconnects (ICs) in Solid Oxide Cells (SOCs) primarily results from chromium (Cr) oxide scale growth on stainless-steel substrates, causing ohmic loss and air-side electrode poisoning by Cr. This thesis addresses these ...

EPFL2024

Excited State-Specific CASSCF Theory for the Torsion of Ethylene

Sandra Saade

State-specific complete active space self-consistent field (SS-CASSCF) theory has emerged as a promising route to accurately predict electronically excited energy surfaces away from molecular equilibria. However, its accuracy and practicality for chemical ...

Amer Chemical Soc2024

Atomic scale volume and grain boundary diffusion elucidated by in situ STEM

Johann Michler, Xavier Maeder, Laszlo Pethö

Diffusion is one of the most important phenomena studied in science ranging from physics to biology and, in abstract form, even in social sciences. In the field of materials science, diffusion in crystalline solids is of particular interest as it plays a p ...

Nature Portfolio2023

Diffusion timescale conundrum in contact metamorphism: Oxygen isotope and trace element profiles in dolomite

Anders Meibom, Stéphane Laurent Escrig, Lukas Baumgartner

Successful application of diffusion chronometry is based on detailed knowledge of diffusion parameters obtained from laboratory experiments, which also need to be upscaled to be applied to natural samples. While generally applicable, several examples of di ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Anomalous Dissipation and Lack of Selection in the Obukhov-Corrsin Theory of Scalar Turbulence

Maria Colombo, Massimo Sorella

The Obukhov-Corrsin theory of scalar turbulence [21, 54] advances quantitative predictions on passive-scalar advection in a turbulent regime and can be regarded as the analogue for passive scalars of Kolmogorov's K41 theory of fully developed turbulence [4 ...

Springernature2023

Lattice Green's function method for Atomistic/Continuum coupling

Ankit Gupta

Metal plasticity is an inherently multiscale phenomenon due to the complex long-range field of atomistic dislocations that are the primary mechanism for plastic deformation in metals. Atomistic/Continuum (A/C) coupling methods are computationally efficient ...

EPFL2023

Tensile and creep-rupture response of additively manufactured nickel-based superalloy CM247LC

Christian Leinenbach

Tensile and creep rupture properties of crack-free CM247LC alloy, processed via laser powder bed fusion, have been characterised in this work at temperatures up to 1000 & DEG;C. The subject alloy matches or even exceeds the tensile performance of its direc ...

ELSEVIER2023

Vacancy segregation and intrinsic coordination defects at (111) twist grain boundaries in diamond

Carolina Baruffi

High radiation damage resistance has become increasingly important for applications of functional materials in harsh environments. The high radiation damage resistance diamond cubic carbon is a unique material which is considered for radiation environments ...

Pergamon-Elsevier Science Ltd2023

Development of next-generation microfluidic systems for enhanced, faster, and cost-effective immunoassays for tissue diagnostics - Ac electrothermal flow & Acoustofluidics

Muaz Salama Abdelmonem Draz

The application of microfluidics in the field of surface-based assays and more specifically, the spatial molecular profiling of tumor tissues has gained a lot of interest, especially with the increased interest in personalized medicine and targeted therapy ...

EPFL2023

The influence of lattice misfit on screw and edge dislocation-controlled solid solution strengthening in Mo-Ti alloys

William Curtin, Carolina Baruffi, You Rao

Mo-Ti alloys form solid solutions over a wide range of compositions, with lattice misfit parameters increasing significantly with titanium content. This indicates a strong increase in the critical stress for edge dislocation motion. Here, we probe the tran ...

SPRINGERNATURE2023

Rapid grain boundary diffusion in foraminifera tests biases paleotemperature records

Anders Meibom, Jaroslaw Hubert Stolarski, Lukas Baumgartner, Arthur Adams, Deyanira Graciela Cisneros Lazaro, Jinming Guo

The paleoseawater temperature record from the oxygen isotope compositions of fossil foraminifera tests may be biased by up to about 1 degrees C due to grain-boundary diffusion alone, according to isotope exchange experiments on foraminifera tests. The oxyg ...

2023

Origin of the enhanced pseudo-elasticity of additively manufactured Fe-17Mn-5Si-4Ni-10Cr-(V, C) shape memory alloy fabricated by laser powder bed fusion

Christian Leinenbach, Irene Ferretto

This study investigated the origin of the enhanced pseudo-elasticity of additively manufactured vanadium carbide-containing Fe-based shape memory alloys. The aged samples with two different starting microstructures, as-built and solution-treated, showed co ...

Elsevier Science Sa2023

Role of Minimum Adhesive Wear Particle Size in Third-Body Layer Properties

Jean-François Molinari, Son-Jonathan Pham-Ba

We employ a novel discrete element method (DEM) force formulation to simulate adhesive wear and assess the effects of material and loading parameters on the properties of the third-body layer (TBL) formed during sliding motion. The study emphasizes the rol ...

2023

Morphology and Transport Characterization of Catalyst Layers for CO2 Reduction

Sophia Haussener, Francesca Lorenzutti

Gas diffusion electrodes (GDEs) help to reduce transport limitations in devices for electrochemical CO2 reduction. Homogenized modeling of such devices requires input of morphological characteristics and effective transport properties of the porous structu ...

2023

Optical manipulation of plasmonic nanoparticles: Applications in surface chemistry and nano-optics

Jeonghyeon Kim

Optical tweezers are devices that can manipulate nano- and microparticles using a laser. The principle of optical tweezers is to apply a force to an object using the momentum of light. This force is very small, but it is sufficient to move things in the mi ...

EPFL2023

Nonparametric estimation for SDE with sparsely sampled paths: An FDA perspective

Victor Panaretos, Leonardo Vincenzo Santoro, Neda Mohammadi Jouzdani

We consider the problem of nonparametric estimation of the drift and diffusion coefficients of a Stochastic Differential Equation (SDE), based on n independent replicates {Xi(t) : t is an element of [0 , 1]}13 d B(t), where alpha is an element of {0 , 1} a ...

Elsevier2024

Reduced order models for coupled systems

Niccolo' Discacciati

Efficient numerical simulations of coupled multi-component systems can be particularly challenging. This is mostly due to the complexity of their solutions, as mutual interactions may cause emergent behaviors, including synchronization and instabilities. V ...

EPFL2023

Low-Temperature Dynamics of Water Confined in Unidirectional Hydrophilic Zeolite Nanopores

Livia Eleonora Bove Kado, Umbertoluca Ranieri, Maria Rescigno

The dynamical properties of water molecules confinedin the unidirectionalhydrophilic nanopores of AlPO4-54 are investigated withquasi-elastic neutron scattering as a function of temperature downto 118 K. AlPO4-54 has among the largest pores known foralumin ...

AMER CHEMICAL SOC2023