Publications related to Methodology for the Design of Man-Portable Power Generation Devices

Related publications (28)

High-Resolution Modeling Without Computation Slowdown for PETALE in CROCUS

Andreas Pautz, Vincent Pierre Lamirand, Axel Guy Marie Laureau, Thomas Jean-François Ligonnet

In a collaboration between Ecole Polytechnique Fédérale de Lausanne (EPFL) and CEA, in the fall of 2020, the experimental Programme d’Étude en Transmission de l’Acier Lourd et ses Eléments (PETALE) was successfully carried out in the CROCUS reactor of EPFL ...

2024

Small-scale turbopumps for waste heat recovery applications based on an organic Rankine cycle: a study from pre-design to experimental validation

Sajjad Zakeralhoseini

The organic Rankine cycle (ORC) system is among the technologies applied to exploit waste heat in vehicles. Since common organic fluids have lower latent heat than water, higher mass flow rates are required to convert the same waste heat, considerably incr ...

EPFL2023

Comparative techno-economic and energy analyses of integrated biorefinery processes of furfural and 5-hydroxymethylfurfural from biomass residue

François Maréchal

For efficient feedstock and energy utilization, integrated biorefinery processes are applied to furfural production from bagasse to convert furfural residue into 5-hydroxymethylfurfural (HMF)-an important intermediate building block for the production of v ...

PERGAMON-ELSEVIER SCIENCE LTD2023

Heat pumping and renewable energy integration for decarbonizing brewery industry and district heating

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos

The energy integration of brewery plants and urban agglomerations has many benefits in terms of rational energy use and reduced environmental impact, especially during scenarios of uncertain supply chain and volatile market prices. In fact, the diversifica ...

Elsevier2023

A comprehensive review of digital twin-part 2: roles of uncertainty quantification and optimization, a battery digital twin, and perspectives

Olga Fink

As an emerging technology in the era of Industry 4.0, digital twin is gaining unprecedented attention because of its promise to further optimize process design, quality control, health monitoring, decision- and policy-making, and more, by comprehensively m ...

SPRINGER2023

ROSMOSE: A Web-based Optimization Tool to Aid Decision-making for the Design and Operation of Industrial and Urban Energy Systems

François Maréchal, Daniel Alexander Florez Orrego, Meire Ellen Gorete Ribeiro Domingos, Cédric Terrier, Michel Lopez

Energy efficiency is crucial for the sustainable operation of all industrial and urban sectors. However, practicing engineers have seldom access to open-source tools that can readily evaluate and compare scenarios in terms of energy consumption, cost, and ...

2023

Combining hypothesis- and data-driven neuroscience modeling in FAIR workflows

Daniel Keller

Modeling in neuroscience occurs at the intersection of different points of view and approaches. Typically, hypothesis-driven modeling brings a question into focus so that a model is constructed to investigate a specific hypothesis about how the system work ...

2022

Code Generation Approach Supporting Complex System Modeling based on Graph Pattern Matching

Dimitrios Kyritsis, Yan Yan, Jinzhi Lu

Code generation is an effective way to drive the complex system development in model-based systems engineering. Currently, different code generators are developed for different modeling languages to deal with the development of systems with multi-domain. T ...

ELSEVIER2022

Modeling of second-order nonlinear metasurfaces

Olivier Martin, Karim Achouri, Andrei Kiselev

We present a frequency-domain modeling technique for second-order nonlinear metasurfaces. The technique is derived from the generalized sheet transition conditions (GSTCs), which have been so far mostly used for modeling linear metasurfaces. In this work, ...

IOP Publishing Ltd2022

A comprehensive review of digital twin - part 1: modeling and twinning enabling technologies

Olga Fink

As an emerging technology in the era of Industry 4.0, digital twin is gaining unprecedented attention because of its promise to further optimize process design, quality control, health monitoring, decision and policy making, and more, by comprehensively mo ...

SPRINGER2022

Design and management of three-dimensional multi-processor systems-on-chip with integrated flow cell arrays

Halima Najibi

Three-Dimensional Multi-Processor Systems-on-Chip (3D MPSoCs) are promising solutions for highly intensive Artificial Intelligence (AI) and Big Data applications. They combine remarkably dense computation capabilities and massive communication bandwidths. ...

EPFL2022

Model-based Systems Engineering Papers Analysis based on Word Cloud Visualization

Dimitrios Kyritsis, Jinzhi Lu

With the continuous improvement of system scale and complexity, model-based system engineering (MBSE) is of great importance in the practice of system engineering (SE). MBSE has been widely concerned in industry, especially in the field of complex equipmen ...

IEEE2022

Model-Based Systems Engineering Tool-Chain for Automated Parameter Value Selection

Dimitrios Kyritsis, Jinzhi Lu

Cyber-physical systems (CPSs) integrate heterogeneous systems and process sensor data using digital services. As the complexity of CPS increases, it becomes more challenging to efficiently formalize the integrated multidomain views with flexible automated ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Design Ontology Supporting Model-Based Systems Engineering Formalisms

Dimitrios Kyritsis, Jinzhi Lu

Model-based systems engineering (MBSE) provides an important capability for managing the complexities of system development. MBSE empowers the formalism of system architectures for supporting model-based requirement elicitation, specification, design, deve ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

A Coarse-mesh Methodology for the Analysis of One and Two-phase Nuclear Reactor Thermal-hydraulics in a Multi-physics Context

Stefan Radman

The analysis of nuclear reactors for performance and safety assessment benefits from the use of computational tools. In this context, this work aims at the development and application of a thermal-hydraulics methodology and related software that respond to ...

EPFL2021

Techno-Economic Optimization of an Integrated Biomass Waste Gasifier–Solid Oxide Fuel Cell Plant

François Maréchal, Jan Van Herle, Jürg Alexander Schiffmann, Arata Nakajo, Maria del Mar Perez Fortes, Victoria Xu Hong He

With a growing energy demand in a carbon-constrained society, fuels cells powered by renewable fuels, and specifically solid waste, are seen as interesting contributors to the energy portfolio. The alternative energy industry needs to reduce costs, enhance ...

2021

Direct Model-checking of SysML Models

Alessandro Tempia Calvino

Model-checking intends to verify whether a property is satisfied by a model, or not. Model-checking of high-level models, e.g. SysML models, usually first requires a model transformation to a low level formal specification. The present papers proposes a ne ...

SCITEPRESS2021

System for co2 capture from internal combustion engine

François Maréchal, Shivom Sharma

System (2) for CO2 capture from a combustion engine (1) comprising an exhaust gas flow circuit (6) having an inlet end fluidly connected to an exhaust of the combustion engine, a heat exchanger circuit (12), a primary exhaust gas heat exchanger (H1) for tr ...

2020

Operational route choice methodologies for practical applications

Michel Bierlaire, Matthieu Marie Cochon de Lapparent, Evanthia Kazagli

This paper focuses on the application of tractable route choice models and presents a set of methods for deriving relevant disaggregate and aggregate route choice indicators, namely link and route flows. Tractability is achieved at the disaggregate level b ...

2020

Reliability and Performance of Model Predictive Control for Demand Response with Residential Heat Pumps

Frédéric Louis-Pierre Raphaël Marie Amblard

Distributed energy resources like solar panels and wind turbines are increasingly replacing fossil fuel energy sources. Due to their natural fluctuations they cause imbalance in the power grid when their production does not overlap with demand. Thus, there ...

EPFL2021