Publications related to A Low Profile UWB Antenna for Wearable Applications: The Tripod Kettle Antenna (TKA)

Related publications (30)

A mmWave Low Complexity and Low-Cost Super Wideband Dual-Polarized Aperture Coupled Antenna for 5G Applications

Advanced antenna system (AAS) is a viable option for 5G millimeter-wave (mmWave) applications. AAS single element is favored to be dual-polarized, wideband, high gain, and compact in order to be utilized for 5G antenna arrays. In this paper, a low complexi ...

Ieee-Inst Electrical Electronics Engineers Inc2024

Code for project entitled "study on conformal antennas, proof of concept prototype for a UAV"

Anja Skrivervik, Yuanyan Su

This code is used for developing the project entitled “Study on conformal antennas, proof of concept prototype for a UAV”, from the aspects of theory, design, and implementation. This code aims to speed up the investigation of an arbitrary phased array ant ...

Zenodo2024

Turbulence and Heat exchange in the Near-Surface Boundary Layer over Patchy Snow

Michael Haugeneder

The atmospheric layer adjacent to the earth's surface is of crucial importance for weather models due to the exchange of energy between the surface and the atmosphere. This exchange is dependent on the various surface properties and influences the state of ...

EPFL2024

Light Emission and Conductance Fluctuations in Electrically Driven and Plasmonically Enhanced Molecular Junctions

Zhiyuan Xie, Christophe Marcel Georges Galland, Wen Chen, Sakthi Priya Amirtharaj, Konstantin Malchow

Electrically connected and plasmonically enhanced molecular junctions combine the optical functionalities of high field confinement and enhancement (cavity function), and of high radiative efficiency (antenna function) with the electrical functionalities o ...

Amer Chemical Soc2024

Moulding and Microfluidic Wet Spinning of the Soft Polymer Optical Fibers for Sensory Applications

Khushdeep Sharma

Polymer optical fibre (POFs) based wearable sensors have attracted a lot of attention in the field of healthcare and biomedical applications. They are in particular envision as the next generation of sensors for the continuous, real-time n ...

EPFL2024

Enabling Wide Bandwidth in Substrate-Integrated Waveguide Slot Antennas by Using Low-Index Metamaterials

Romain Christophe Rémy Fleury, Amir Jafargholi

This paper presents a solution to overcome the inherently limited bandwidth of substrate-integrated waveguide (SIW) slot antennas. It is analytically shown that by decreasing the permittivity of a dielectric loaded slot antenna, the resulting bandwidth inc ...

American Physical Society (APS)2024

Circularly polarized planar antenna with axially symmetric beamwidth reconfigurability

Anja Skrivervik, Ismael Vico Triviño, Hannes Bartle

This contribution presents the design of a compact circularly polarized antenna featuring beamwidth reconfiguration in both the horizontal and vertical planes. The observed radiation patterns in each of the reconfigurable states present axial symmetry and ...

IEEE2023

Weather Impacts on Indoor Radon Short-Term Measurements in Switzerland

Joan Frédéric Rey

Radon is a natural and radioactively well-known carcinogenic indoor air pollutant. Since 2020, a radon short-term proactive methodology has been proposed by Swiss authorities, which aims to evaluate the probability of overpassing the national reference val ...

MDPI2023

Small antennas with broad beamwidth integrated on a drone enclosed in a protective structure

Anja Skrivervik, Ismael Vico Triviño

In this paper, we analyze the integration of small antennas in a drone protected by a conductive structure. They must be light and resistant to provide high collision resilience, which is critical for drones flown indoors and in complex environments. To ac ...

IEEE2023

Analysis of Non-Canonical Body-Conformal Arrays with Polarization Decomposition

Anja Skrivervik, Denys Nikolayev

Conformal phased arrays can be found in many applications due to their ability to fit tridimensional surfaces and, thanks to their scanning performance, can excel planar arrays. However, most of the previously proposed analysis methods can be applied only ...

IEEE2023

Toward Metantennas: Metamaterial-Based Antennas for Wireless Communications

Yuanyan Su

Antennas have historically been the most common electromagnetic (EM) technology for wireless communication systems. Antenna as hardware is entirely dependent on the EM properties of the materials used, mostly related to the permittivity and permeability. I ...

Ieee-Inst Electrical Electronics Engineers Inc2023

Assessing real-world gait with digital technology? Validation, insights and recommendations from the Mobilise-D consortium

Kamiar Aminian, Anisoara Ionescu, Abolfazl Soltani

Background: Although digital mobility outcomes (DMOs) can be readily calculated from real-world data collected with wearable devices and ad-hoc algorithms, technical validation is still required. The aim of this paper is to comparatively assess and validat ...

BioMed Central2023

Assessing sublimation during snow transport and sublimation effects on the isotopic composition of water vapor

Armin Sigmund

Sublimation influences the water storage in snow covers and glaciers, which is important for water use and projections of the sea level rise. Yet, it is challenging to quantify sublimation for large areas or in conditions of snow transport. In-situ measure ...

EPFL2023

Biomaterial devices on Arecanut palm leaf for microwave applications

Anja Skrivervik, Sujith Raman

This paper presents an investigation on the possibility of arecanut palm leaf as a biomaterial substrate for various microwave devices such as transmission lines, antenna, filter and a radio frequency identification device (RFID). The dielectric properties ...

IEEE2023

Evaluation of a New Process for the Additive Manufacturing of Metal Antennas

German Augusto Ramirez Arroyave

This paper presents a new process for additively manufacturing purely metallic antennas based on Fused Deposition Modeling (FDM), with a proprietary filament developed using a hot extrusion method and composed by a mix of rounded shape copper powders with ...

2023

Analytic Approximation of In-Body Path Loss for Implanted Antennas

Anja Skrivervik, Mingxiang Gao

Implantable bioelectronic devices predominantly use wireless links for communication and/or power transfer. When considering transmitting implanted antennas, electromagnetic radiation through biological media is highly attenuated, and previous work has sho ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

How to Make Elastomers Piezoelectric?

Frank Nüesch, Francis Owusu

Piezoelectrics play a significant role in modern electronics and electric devices. Thermal or mechanical stress on such materials induces a change in polarization generating an electric response, which is the sole effect of why they are so interesting. How ...

Wiley2023

Microstrip patch antennas with broad beamwidth

Ismael Vico Triviño

Microstrip antennas offer a broad set of advantages such as low profile, light weight, easy fabrication and low cost. As these are desirable or even critical for a broad range of applications, there has been a large interest for these antennas in the anten ...

EPFL2023

Q-Factor Bounds for Microstrip Patch Antennas

Anja Skrivervik

Antenna bounds are a useful tool in assessing the feasibility or performance of an antenna design. Microstrip patch antennas are often limited by their relatively narrow bandwidth, and therefore Q-factor is an important design parameter, as it is related t ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

Polarization-Controlled Chromo-Encryption

Olivier Martin, Hsiang-Chu Wang

The response of simple plasmonic nanorods to polarized illumination is studied in detail. Depending on the orientation of that polarization with respect to the symmetry axes of the nanostructure, a chiral response can occur, which can be analyzed through a ...

WILEY-V C H VERLAG GMBH2023