Publications related to Multiphysics finite element model of a frequency-amplifying piezoelectric energy harvester with impact coupling for low-frequency vibrations

Electric-field-induced second-order nonlinear processes in stoichiometric silicon nitride

Nonlinear optical frequency conversion is one of the driving research areas in photonics. Its quasi instantaneous response and the promise of low power consumption in integrated structures could cover the demand for fast signal processing with minimal ener ...

EPFL2024

Damping of flexure blades based on bi-material additive manufacturing

Simon Nessim Henein, Florent Cosandier, Nicolas Blondiaux, Elias Sebastian Klauser, Loïc Benoît Tissot-Daguette, Nikola Kalentics, Lisa Salamin, Florent Alexandre Boudoire

Flexure-based mechanisms have become state-of-the-art solutions for the design of high-precision mechanisms, free from friction wear, backlash, and lubrication. These properties which are necessary for applications in ultraclean or harsh environments, neve ...

2023

Nonlinear Frequency Conversion in III-Nitride Doubly Resonant Photonic Crystal Cavities

Jun Wang

Nonlinear frequency conversion processes, such as second-harmonic generation (SHG) and spontaneous parametric down-conversion (SPDC), are essential in many applications, including the generation of entangled photons. It's desirable to enhance these process ...

EPFL2023

Dynamic behavior of exposed geomembrane systems in pressure waterways

Giovanni De Cesare, Samuel Luke Vorlet, Roberto Proença Seixas

Geomembrane systems have been used in dams and reservoirs as rehabilitation technology since several decades and are now used worldwide. They act as impervious layer to prevent and mitigate water leakage and damage to structures. They meet the needs of man ...

CRC Press/Balkema2023

Vibrational NDT with Under-sampled Data through Physics-informed Neural Networks

Olga Fink

The vibrational response of solid materials and structural components is substantially governed by their mechanical and geometrical properties. Low-frequency vibrations and modal frequencies are sensitive to global geometrical deviations, while high-freque ...

2023

Nanomechanical resonators with low dissipation for quantum optomechanics

Alberto Beccari

Fields of technology as diverse as microwave filter construction, characterization of material interfaces with atomic precision, and detection of gravitational waves from astronomical sources employ mechanical resonators at their core. The utility of mecha ...

EPFL2023

Alignment & stability challenges for FCC-ee

Frank Zimmermann, Léon Van Riesen-Haupt

In order to achieve its ultra-low vertical emittance (1 pm) and high luminosity (of up to 230 x 10(34) cm(-2) s(-1) per collision point), the e(+)e(-) Future Circular Collider (FCC-ee) requires a well-informed alignment strategy, powerful correction method ...

SPRINGER2023

Toward Band n78 Shear Bulk Acoustic Resonators Using Crystalline Y-Cut Lithium Niobate Films With Spurious Suppression

Victor Plessky, Luis Guillermo Villanueva Torrijo, Soumya Yandrapalli

This work presents the study of suspended Y-cut Lithium Niobate shear bulk acoustic resonators for wide band filter applications in the frequency range of 3.5-4.5GHz. The resonators consist of a Lithium Niobate film with Aluminum top interdigitated electro ...

Institute of Electrical and Electronics Engineers2023

Development of Thin Film Lithium Niobate Shear Bulk Acoustic Wave Resonators

Soumya Yandrapalli

RF MEMS piezoelectric acoustic resonators are the essential building blocks for RF filters used in RF front-end modules for wireless mobile communication due to their compact size in the MHz-GHz frequency range, high Quality factors and large relative band ...

EPFL2022

A Cryo-CMOS Wideband Quadrature Receiver With Frequency Synthesizer for Scalable Multiplexed Readout of Silicon Spin Qubits

Edoardo Charbon, Andrea Ruffino, Yatao Peng

In this article, a cryo-CMOS receiver integrated with a frequency synthesizer for scalable multiplexed readout of qubits is presented, focusing on radio frequency (RF) reflectometry readout of silicon-based semiconductor spin qubits/quantum dots. The propo ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Optically reconfigurable quasi-phase-matching in silicon nitride microresonators

Camille Sophie Brès, Jianqi Hu, Anton Stroganov, Edgars Nitiss

Quasi-phase-matching has long been a widely used approach in nonlinear photonics, enabling efficient parametric frequency conversions such as second-harmonic generation. However, in silicon photonics the task remains challenging, as materials best suited f ...

Nature Publishing Group2022

Optimization of Edge Profile for Improved Anti-Resonance Quality Factor in Lithium Niobate SH0 Resonators

Luis Guillermo Villanueva Torrijo, Silvan Stettler

Thin-film lithium niobate (LNO) has been identified as a promising material platform for enabling high electromechanical coupling and low-loss piezoelectric resonators for filtering applications. In this work, the design and fabrication of fundamental shea ...

IEEE2022

Development of Lamb wave resonators in thin film X-cut lithium niobate

Muhammad Faizan

Microelectromechanical systems (MEMS) is among the most revolutionary technologies of 21st century, with the applications ranging from industrial systems to consumer electronics. Using MEMS in battery-powered wireless devices has long been seen as the evol ...

EPFL2021

Automatic locking of a parametrically resonating, base-excited, nonlinear beam

Amit Yedidia Dolev

Described is a closed-loop control scheme capable of stabilizing a parametrically excited nonlinear structure in several vibration modes. By setting the relative phase between the spatially filtered response and the excitation, the open-loop unstable solut ...

SPRINGER2021

A Vibrational Technique for in vitro Intraoperative Prosthesis Fixation Monitoring

Kamiar Aminian, Hooman Dejnabadi, Seyed Abdolmajid Yousefsani

Objective: In this paper, a new vibrational modal analysis technique was developed for intraoperative cementless prosthesis fixation evaluation upon hammering. Methods: An artificial bone (Sawbones)-prosthesis system was excited by sweeping of a sine signa ...

2020

Vibration Suppression Through Variable Stiffness and Damping Structural Joints

Gennaro Senatore

This paper introduces a new semi-active strategy for vibration control of truss and frame structures equipped with variable stiffness and damping joints which consist of a shape memory polymer (SMP) core reinforced by an SMP-aramid composite skin. When the ...

2020

Crank arrangement for driving a mechanical oscillator

Simon Nessim Henein, Billy Nussbaumer

Crank arrangement (1) for driving a pin-driven two degrees? of freedom mechanical oscillator (5), comprising:- a crank element (7) arranged to be rotationally driven about an axis of rotation (19) by means of a mechanical source of energy (M),- a crank slo ...

2020

Evidence of Smaller 1/F Noise in AlScN-Based Oscillators Compared to AlN-Based Oscillators

Luis Guillermo Villanueva Torrijo, Andrea Lozzi, Marco Liffredo

In this paper we investigate the direct effect of resonator quality factor (Q) on the oscillator phase noise. We use 2-port contour mode resonators (CMRs), fabricated both with aluminum nitride (AlN) and aluminum scandium nitride (AlScN), as the frequency- ...

Institute of Electrical and Electronics Engineers2020

Monolithic piezoelectric control of soliton microcombs

Rui Ning Wang, Tobias Kippenberg, Erwan Guillaume Albert Lucas, Junqiu Liu, Miles Henry Anderson, Arslan Sajid Raja, Wenle Weng, Jijun He, Tianyi Liu

High-speed actuation of laser frequency(1)is critical in applications using lasers and frequency combs(2,3), and is a prerequisite for phase locking, frequency stabilization and stability transfer among optical carriers. For example, high-bandwidth feedbac ...

NATURE PUBLISHING GROUP2020

Flexure Pivot Oscillators for Mechanical Watches

Etienne Frédéric Gabriel Thalmann

It appears that the concerted efforts of the watchmaking industry are leading towards a limit in mechanical watch accuracy. The general consensus in horology is that the time base's quality factor, a dimensionless number that characterizes the oscillator d ...

EPFL2020