Publications related to Experimental validation of an integrated modelling approach to neutron emission studies at JET

Related publications (36)

Iterative learning optimization and control of MAST-U breakdown and early ramp-up scenarios

Federico Alberto Alfredo Felici, Adriano Mele

Plasma start-up is a crucial phase for tokamak operations and its design and optimization is getting more and more attention in view of the operation of future large tokamaks like ITER, where costs, risks and operational limits require more design tools. M ...

SPRINGER2025

Energetic particle physics: Chapter 7 of the special issue: on the path to tokamak burning plasma operation

Mario Ludovico Podesta

We review the physics of energetic particles (EPs) in magnetically confined burning fusion plasmas with focus on advances since the last update of the ITER Physics Basis (Fasoli et al 2007 Nucl. Fusion 47 S264). Topics include basic EP physics, EP generati ...

IOP Publishing Ltd2025

Correlation of the L-mode density limit with edge collisionality

Alessandro Pau

The 'density limit' is one of the fundamental bounds on tokamak operating space, and is commonly estimated via the empirical Greenwald scaling. This limit has garnered renewed interest in recent years as it has become clear that ITER and many tokamak pilot ...

IOP Publishing Ltd2025

DEMO toroidal field coil fast discharge unit integration studies

Roberto Guarino

The Fast Discharge Units (FDUs) of the Superconducting (SC) Toroidal Field (TF) coils in the European demonstration fusion power plant DEMO warrant the machine integrity over its full lifetime against severe failure events, such as SC coil quenches or any ...

Elsevier Science Sa2024

High brightness neutron source optimized for very high pulsed magnetic field experiments

Mina Akhyani

Conducting neutron scattering experiments in the presence of high pulsed magnetic fields, namely above 40 T, provides valuable information about the magnetic structures of materials. However, these experiments are challenging and time-consuming because the ...

EPFL2024

Validation of a synthetic fast ion loss detector model for Wendelstein 7-X

Anton Jansen Van Vuuren

We present the first validated synthetic diagnostic for fast ion loss detectors (FILDs) in the Wendelstein 7-X (W7-X) stellarator. This model has been developed on, and validated against experimental data from, a FILD provided by the National Institute for ...

IOP Publishing Ltd2024

Overview of fast particle experiments in the first MAST Upgrade experimental campaigns

Matteo Vallar

MAST-U is equipped with on-axis and off-axis neutral beam injectors (NBI), and these external sources of super-Alfv & eacute;nic deuterium fast-ions provide opportunities for studying a wide range of phenomena relevant to the physics of alpha-particles in ...

IOP Publishing Ltd2024

Re-design of EU DEMO with a low aspect ratio

Xabier Sarasola Martin

The design point that had been chosen for EU DEMO in 2016 is reviewed here and a modification is proposed with a lower aspect ratio. Previously the same aspect ratio, A, was chosen for EU DEMO as in major tokamak experiments including ITER (A = 3.1), and, ...

Elsevier2024

Innovative dud detection based on JET DT experience

Olivier Sauter, Alessandro Pau

DT operations at JET gave a unique and invaluable opportunity to design, develop and test real -time controllers that will be applied in future burning plasma devices, as ITER and SPARC. Among them, the dud detector [L. Piron et al. 2019 Fusion Eng. Design ...

Elsevier Science Sa2024

Tool Developments in the OpenMC Code: Correlated Sampling and Transient Fission Matrix Approach Coupled to OpenFOAM

Axel Guy Marie Laureau, Thomas Jean-François Ligonnet

This article outlines the advancements made in broadening the application scope of the OpenMC neutron transport code to include thermohydraulic coupling and nuclear data uncertainty propagation. These developments primarily involve the incorporation of the ...

Taylor & Francis Inc2024

GHOST commissioning science results - II: a very metal-poor star witnessing the early galactic assembly

Pascale Jablonka

This study focuses on Pristine_180956.78-294759.8 (hereafter P180956, [Fe/H] = -1.95 +/- 0.02), a star selected from the Pristine Inner Galaxy Survey (PIGS), and followed-up with the recently commissioned Gemini High-resolution Optical SpecTrograph (GHOST) ...

Oxford Univ Press2024

The JET hybrid scenario in Deuterium, Tritium and Deuterium-Tritium

Javier García Hernández, Mikhail Maslov, Matteo Fontana, Haomin Sun

The JET hybrid scenario has been developed from low plasma current carbon wall discharges to the record-breaking Deuterium-Tritium plasmas obtained in 2021 with the ITER-like Be/W wall. The development started in pure Deuterium with refinement of the plasm ...

IOP Publishing Ltd2023

Tritium removal from JET-ILW after T and D-T experimental campaigns

Henri Weisen, Mikhail Maslov

After the second Deuterium-Tritium Campaign (DTE2) in the JET tokamak with the ITER-Like Wall (ILW) and full tritium campaigns that preceded and followed after the DTE2, a sequence of fuel recovery methods was applied to promote tritium removal from wall c ...

IOP Publishing Ltd2023

Neutron-Gamma Noise Measurements in a Zero-Power Reactor Using Organic Scintillators

Andreas Pautz, Vincent Pierre Lamirand, Oskari Ville Pakari

Noise measurements in light water reactor systems aid in generating validation data for integral point kinetic parameter predictions and generating monitoring parameters for reactor safety and safeguards. The CROCUS zero-power reactor has been used to supp ...

Ieee-Inst Electrical Electronics Engineers Inc2024

HASPIDE: a project for the development of hydrogenated amorphous silicon radiation sensors on a flexible substrate

Giovanni De Cesare, Sylvain Dunand, Luca Massimiliano Antognini, Jonathan Emanuel Thomet

Hydrogenated amorphous silicon (a-Si:H) is a material with a very good radiation hardness and with the possibility of deposition on flexible substrates like Polyimide (PI). Exploiting these properties, the HASPIDE (Hydrogenated Amorphous Silicon PIxels DEt ...

Iop Publishing Ltd2024

HighNESS conceptual design report: Volume I

Davide Campi, Mina Akhyani

The European Spallation Source, currently under construction in Lund, Sweden, is a multidisciplinary international laboratory. Once completed to full specifications, it will operate the world's most powerful pulsed neutron source. Supported by a 3 million ...

Ios Press2023

Gyrokinetic simulations of turbulence in magnetic fusion plasmas using a delta-f PIC scheme with evolving background

Moahan Murugappan

Using the GKEngine code which simulates an electrostatic plasma with adiabatic electron response under a sheared-slab geometry, an attempt at developing a hybrid approach between the delta-f and full-f schemes to describe plasma profiles exhibiting high fl ...

EPFL2024

Extension, validation, and optimization of Serpent/DYN3D/ATHLET code system for SFR applications

Vincenzo Anthony Di Nora

The sequence of codes Serpent/DYN3D has been developed by the Helmholtz-Zentrum Dresden-Rossendorf and successfully applied to core static and transient analyses of sodium-cooled fast reactors (SFRs). The successful application of the sequence to SFRs was ...

EPFL2023

JET D-T scenario with optimized non-thermal fusion

Javier García Hernández, Mikhail Maslov, Haomin Sun, Michele Marin

In JET deuterium-tritium (D-T) plasmas, the fusion power is produced through thermonuclear reactions and reactions between thermal ions and fast particles generated by neutral beam injection (NBI) heating or accelerated by electromagnetic wave heating in t ...

IOP Publishing Ltd2023

Validation of D-T fusion power prediction capability against 2021 JET D-T experiments

Javier García Hernández, Mikhail Maslov, Michele Marin

JET experiments using the fuel mixture envisaged for fusion power plants, deuterium and tritium (D-T), provide a unique opportunity to validate existing D-T fusion power prediction capabilities in support of future device design and operation preparation. ...

IOP Publishing Ltd2023