Publications related to Of Malicious Motes and Suspicious Sensors

Related publications (29)

Integrated Wireless Power, Data Communication, and Thermal Sensing System for Autonomous Multisite Brain Implants

Implanted medical devices (IMDs) have been widely developed to support the monitoring and recording of biological data inside the body or brain. Wirelessly powered IMDs, a subset of implantable electronics, have been proposed to eliminate the limitations r ...

EPFL2024

Federated learning with uncertainty-based client clustering for fleet-wide fault diagnosis

Olga Fink, Hao Lu

Operators from various industries have been pushing the adoption of wireless sensing nodes for industrial monitoring, and such efforts have produced sizeable condition monitoring datasets that can be used to build diagnosis algorithms capable of warning ma ...

2024

WINC: A Wireless IoT Network for Multi-Noise Source Cancellation

Haitham Al Hassanieh, Junfeng Guan

This paper introduces Wireless IoT-based Noise Cancellation (WINC) which defines a framework for leveraging a wireless network of IoT microphones to enhance active noise cancellation in noise-canceling headphones. The IoT microphones forward ambient noise ...

Assoc Computing Machinery2023

Self-powered transformer intelligent wireless temperature monitoring system based on an ultra-low acceleration piezoelectric vibration energy harvester

Xin Chen

The wireless sensor nodes used for monitoring the condition of grid equipment always be powered by disposable batteries. However, it introduces disadvantages, such as inconvenient replacement, short lifespan, and envi-ronmental pollution, significantly imp ...

Elsevier2023

REMOTE: Re-thinking Task Mapping on Wireless 2.5D Systems-on-Package for Hotspot Removal

David Atienza Alonso, Giovanni Ansaloni, Marina Zapater Sancho, Darong Huang, Rafael Medina Morillas

2.5D Systems-on-Package (SoPs) are composed by several chiplets placed on an interposer. They are becoming increasingly popular as they enable easy integration of electronic components in the same package and high fabrication yields. Nevertheless, they int ...

2023

Radiation Patterns of RF Wireless Devices Implanted in Small Animals: Unexpected Deformations Due to Body Resonance

Anja Skrivervik, Stéphanie Lacour, Mingxiang Gao, German Augusto Ramirez Arroyave, Kangling Wu, James Daniel Rosenthal

One challenge in designing RF wireless bioelectronic devices is the impact of the interaction between electromagnetic waves and host body tissues on far-field wireless performance. In this paper, we investigate a peculiar phenomenon of implantable RF wirel ...

2023

Strategies, Techniques and Systems for powering low-maintenance and battery-free devices through Energy Harvesting and Wireless Power Transfer

Roberto La Rosa

The purpose of this research has a background in the market for Internet of Things (IoT)devices and wireless sensor networks. The Market Forecast predicts the connection of a trillion"things" by 2025. The global smart sensor market size trend grows from US ...

EPFL2022

Theoretical Efficiency and Dosimetry of Buffered On-body Transmitter Antennas for Wireless Powering of In-body Devices

Anja Skrivervik, Denys Nikolayev

The viable and safe application of wireless power transfer for powering bioelectronic implants requires understanding the wave propagation in heterogeneous and dispersive media, the electromagnetic exposure assessment, and the optimum design of the system ...

IEEE2022

Vision-based Flocking in Aerial Robot Swarms

Fabian Maximilian Schilling

Aerial robot swarms have the potential to perform time-critical and dangerous tasks such as disaster response without compromising human safety. However, their reliance on external infrastructure such as global positioning for localization and wireless net ...

EPFL2022

Wireless Powering Efficiency of Deep-Body Implantable Devices

Anja Skrivervik, Mingxiang Gao, Denys Nikolayev

The wireless power transfer (WPT) efficiency to implanted bioelectronic devices is constrained by several frequency-dependent physical mechanisms. Recent works have developed several mathematical formulations to understand these mechanisms and predict the ...

Institute of Electrical and Electronics Engineers2022

Hybrid Wireless-Local Communication via Information Propagation for Modular Robotic Synchronization Applications

Jamie Paik, Christoph Heinrich Belke, Kevin Andrew Holdcroft

Modular robots hold promise of adaptability, robustness, and versatility. Synchronization of modules is critical; if a module is asynchronous, not only will the robot fail to perform tasks properly, but its behavior may be self-destructive through self-col ...

WILEY2022

Subthreshold VO2 vertical switches for large-bandwidth millimeter-wave and sub-terahertz detection

Mihai Adrian Ionescu, Fatemeh Qaderi Rahaqi, Ali Gilani, Daesung Park

n-linear impedance characteristics of VO2 offer solutions to highly sensitive radio-frequency (RF), millimeterwave (mm-wave), and terahertz (THz) detectors. We demonstrate high-speed broadband sensibility of miniaturized VO2 switches by utilizing the nonli ...

IEEE2022

Secret Key Generation Using Short Blocklength Polar Coding Over Wireless Channels

Yanina Yurina Shkel

This paper investigates the problem of secret key generation from correlated Gaussian random variables in the short blocklength regime. Short blocklengths are commonly employed in massively connected IoT sensor networks in 5G and beyond wireless systems. P ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Federated Learning Over Wireless Networks: Convergence Analysis and Resource Allocation

Vincent Gramoli

There is an increasing interest in a fast-growing machine learning technique called Federated Learning (FL), in which the model training is distributed over mobile user equipment (UEs), exploiting UEs' local computation and training data. Despite its advan ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Safeguarding the IoT From Malware Epidemics: A Percolation Theory Approach

Ainur Zhaikhan

The upcoming Internet of Things (IoT) is foreseen to encompass massive numbers of connected devices, smart objects, and cyber-physical systems. Due to the large scale and massive deployment of devices, it is deemed infeasible to safeguard 100% of the devic ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

Propagation-Loss Characterization for Livestock Implantables at (433,868,1400) MHz

Denys Nikolayev

Automated systems based on wearable sensors for livestock monitoring are becoming increasingly popular. Specifically, wireless in-body sensors could yield relevant data, such as ruminal temperature. The collection of such data requires an accurate characte ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2021

A Self-powered Ambient Light Power Measurement Platform with Time-domain Readout

Catherine Dehollain, Roberto La Rosa

Internet of Things (IoT) provides more and more adequate infrastructures for many applications and advanced services. This scenario promotes the ability to satisfy the growing demand for innovative measuring systems, increasingly popular consisting of inte ...

IEEE2021

Resource Trade-Offs in Circuits and Systems: from Neurotechnology to Communications

Arda Uran

This thesis aims to explore and exploit trade-offs in integrated circuits and systems to overcome the fundamental bottlenecks faced by future data acquisition and communication systems. Specifically, we target the emerging implantable neurotechnology and t ...

EPFL2021

Adaptive Wireless Power Transfer and Backscatter Communication for Perpetual Operation of Wireless Brain-Computer Interfaces

James Daniel Rosenthal

Brain-computer interfaces (BCIs) are neural prosthetics that enable closed-loop electrophysiology procedures. These devices are currently used in fundamental neurophysiology research, and they are moving toward clinical viability for neural rehabilitation. ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2022

Network coded multipath and related techniques

Emre Telatar

Techniques are disclosed for adaptive coding and scheduling of packets in wireless networks. The adaptive coding and scheduling can be achieved by utilizing a discrete water filling (DWF) scheme. In an example, a computer-implemented method to adaptively c ...

2020