Publications related to Updating existing railway bridges based on monitoring data

Related publications (34)

Structural response of fiber-polymer composite bending-active elastica members under short- and long-term loading conditions

Bending-active represents a structural typology whose geometry is based on the elastic deformation of initially straight members that, in the case of beams, is known as elastica. This configuration involves applying horizontal displacements to a sliding su ...

EPFL2024

Environmental and Life-Cycle Cost Evaluation of a Composite Timber-UHPFRC Bridge

Eugen Brühwiler, Numa Joy Bertola

Ultra-High-Performance Fibre Reinforced Cementitious Composite (UHPFRC) has recently been used to design lightweight structures and strengthen existing ones, with more than 300 applications in Switzerland. Several composite timber-UHPFRC bridges have been ...

2023

Reliability analysis of welded stud shear connectors on simply-supported bridge girders

Scott Walbridge, Matthew James Sjaarda

This paper examines the reliability of welded stud shear connectors for steel-concrete composite bridge girders. A finite element model of a simply-supported bridge was created featuring link connector elements representing the shear studs between beam and ...

CANADIAN SCIENCE PUBLISHING2021

Fatigue examination of reinforced-concrete bridge slabs using acoustic emission and strain monitoring data

Imane Bayane

The examination of bridges under service loading is key for understanding their condition and thus for their sustainable and efficient use. The need to extend the service duration of existing bridges is increasing, and therefore, efficient tools for examin ...

EPFL2021

Post-tensioning of glass beams: Analytical determination of the allowable pre-load

Alain Nussbaumer, Pieter Christian Louter, Jagoda Cupac

The effectiveness of post-tensioning in enhancing the fracture resistance of glass beams depends on the level of compressive pre-stress introduced at the glass edge surface that will in service be exposed to tensile stresses induced by bending. Maximum pre ...

2021

Fatigue of reinforced UHPFRC members and monitoring of fatigue action effects on bridges

Bartlomiej Wojciech Sawicki

The objective of this thesis is to develop knowledge and methods to prevent fatigue failure of bridges. The Fatigue Limit State is investigated from both the demand (S) and resistance (R) side. The S-part focuses on reduction of uncertainties through monit ...

EPFL2021

Constructional method of UHPC on steel deck of long span suspension bridge and in-situ experimental test

Jian Zhan

The Second Dongting Lake (SDTL) Bridge is the longest steel truss girder suspension bridge in China, which has a main span of 1480 m. To alleviate deterioration issues in the orthotropic steel deck (OSD), the steel-ultra high performance concrete (UHPC) li ...

EPFL2020

International Perspective on UHPC in Bridge Engineering

Eugen Brühwiler

Ultrahigh-performance concrete (UHPC) offers significant potential to address a variety of needs in bridge design, construction, and performance enhancement. Bridge owners have shown willingness to embrace novel solutions that could address specific challe ...

ASCE-AMER SOC CIVIL ENGINEERS2020

Fiber-based hysteretic model for simulating strength and stiffness deterioration of steel hollow structural section columns under cyclic loading

Dimitrios Lignos

An efficient component model has been developed that captures strength and stiffness deterioration of steel hollow structural section (HSS) columns. The proposed model consists of two fiber-based segments at a member's ends along with an elastic segment in ...

2020

Static and Fatigue Biaxial Flexural Behavior of Strain-Hardening UHPFRC Thin Slab Elements

Xiujiang Shen

Cast-in-place thin layers of Ultra-High Performance Fiber Reinforced Cementitious Composites (UHPFRC) on the specific zones of existing reinforced concrete (RC) bridge decks has been demonstrated to be a technically efficient and economic rehabilitation an ...

EPFL2020

Fatigue Damage Factor Calibration for Long-Span Cable-Stayed Bridge Decks

Alain Nussbaumer, Cláudio Alexandre Pereira Baptista

Part 2 of the Eurocode 3 (EN 1993-2) proposes a straight forward fatigue verification method using a single heavy vehicle model (FLM3) and a damage equivalent factor, lambda, to represent the fatigue damaging effects of the real traffic on road bridges. Th ...

SPRINGER NATURE SWITZERLAND AG2019

“Pocket-Monitoring” for the fatigue safety verification of bridge members in steel and reinforced concrete

Eugen Brühwiler

The fatigue safety of the reinforced concrete deck slab of a sixty-year-old steel-concrete road viaduct as well as the riveted steel girders of a 130 year old railway bridge was questioned based on the results of conventional assessment consisting in "re-c ...

Taylor & Francis Group2018

Stress-Induced Depression: Is Social Rank a Predictive Risk Factor?

Maria del Carmen Sandi Perez, Thomas Didier Larrieu

An intriguing question in the field of stress is what makes an individual more likely to be susceptible or resilient to stress‐induced depression. Predisposition to stress susceptibility is believed to be influenced by genetic factors and early adversity. ...

2018

CHARACTERIZATION OF TENSILE BEHAVIOR IN UHPFRC THIN SLAB USING NDT METHOD AND DIC SYSTEM

Eugen Brühwiler, Xiujiang Shen

Proper test and analysis methods are necessary for characterizing the tensile behavior of strain hardening Ultra High Performance Fiber Reinforced Cementitious Composites (UHPFRC) accurately and representatively. In this paper, the direct tensile tests (DT ...

RILEM Publications S.A.R.L.2018

Comparing methodologies for structural identification and fatigue life prediction of a highway bridge

Ian Smith, Alain Nussbaumer, Sai Ganesh Sarvotham Pai

Accurate measurement-data interpretation leads to increased understanding of structural behavior and enhanced asset-management decision making. In this paper, four data-interpretation methodologies, residual minimization, traditional Bayesian model updatin ...

2018

Durability and fatigue performance of a typical cold-curing structural adhesive in bridge construction

Maria Savvilotidou

The science of adhesives and adhesion for structural connections has undergone significant development during the last few decades - and successfully so in a wide variety of industries. Recent applications of structural bonding are being adopted in the con ...

EPFL2017

Rotational stiffness of web-flange junctions of pultruded GFRP decks

Thomas Keller, Julia De Castro San Roman Fest, Sonia Yanes Armas

The rotational behavior of the web-flange junctions (WFJs) of a pultruded glass fiber-reinforced polymer (GFRP) bridge deck system with trapezoidal cell cross-sectional geometry was investigated. The rotational response of three WFJ types, in two bending m ...

Elsevier2017

Multiaxial and variable amplitude fatigue in steel bridges

Cláudio Alexandre Pereira Baptista

Modern bridge construction all over Europe in the last decades, has highlighted the importance of steel solutions for the design of bridges. Steel bridges have become slender and lighter with the generalisation of welded connections. These features increas ...

EPFL2016

A monitoring system for determination of real deck slab behaviour in prestressed box girder bridges

Eugen Brühwiler, Mark Anthony Treacy

Due to ever increasing traffic demands the fatigue safety and service life of the bridges of a railway line in Brazil need to be examined. Conventional assessment methods using load models and approaches as suggested in codes lead to conservative results r ...

CRC Press/Balkema2012

Effect on Bridge Load Effects of Vehicle Transverse In-Lane Position: A Case Study

Eugen Brühwiler, Mark Anthony Treacy

This paper presents an investigation of the influence of vehicle transverse in-lane position on bridge traffic load effects. To analyze the influence, both finite-element analysis and statistical analysis methods are used, and various technical aspects are ...

American Society of Civil Engineers2015